how to fit UCA's to a HILUX

Подписаться 5 тыс.

Просмотров 26 тыс.

50% 1

how to fit aftermarket upper control arms to a 2005-15 Hilux, this should also be the same for a 2016 - on Hilux as they use the same upper control arm.
I'm by no means a mechanic and I found this install pretty easy so if I can do it then I'm sure you all can by following along.
Tool List:
14mm Socket
17mm Socket
19mm Socket
22mm Socket (Wheel nuts, size may vary)
Socket ratchet
19mm Spanner
Breaker Bar
Hammer
Pliers
Axle Stand
Jack
Flat head screwdriver

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@kingflems3593 11 месяцев назад

Only vid I found that mentioned "THIS NEEDS TO BE SHOCKED FREE". Legend mate, made all the difference it needed

@Outta_Tyme 8 месяцев назад

is the white plastic ring on the ball joint needed?

@MC-jf6ic 4 месяца назад

How many degrees is uca mate?

@4x4maximus 3 года назад

Hey man, did my today with a 3inch lift. You can fit the 4 washers in, its a prick doing it alone, get a mate to help took all 4 hands lol you feed the bolt in one side first to hold them 2 washers, then pull uca away on rear side and hold inner washer and push uca back in line a get mate to slip bolt thru

@RyvalCreative 3 года назад

Haha ok yeah it really didn’t seem like it would fit, might have to pull it apart and check them in then!

@4x4maximus 3 года назад

@@RyvalCreative yeh its tight but they fit, almost impossible doing it with 2hands tho lol I tried lol

@4x4maximus 3 года назад

I was gunna leave them out at first but the fit wasn't right, I figured if the uca couldn't sit up there by itself like standard one did when I took bolt out that it wasn't right

@chxhxhdhdhdhdhdhfhdhdhc3442 Год назад

What uca should go with to get the most clearance from the tire?

@UnbreakableEvents 4 года назад

If I get UCA what’s the biggest tyres I can fit on my 2” lift Toyota hilux sr5 2013 ?

@RyvalCreative 4 года назад

UCA's won't really affect the size of tyre you can fit , they basically just improve the drive-ability once you have made the other necessary changes to fit bigger tyres like removing plastic from the inside of the guards and adjusting caster forwards.

@baileyknight9188 4 года назад

What did you torque all the nuts up too?

@RyvalCreative 4 года назад

bailey knight just went pretty snug with a big breaker bar, didn’t do any specific torque

@baileyknight9188 4 года назад

Okay thanks mate legend

@JRCadventures 2 года назад

What lift do you have on the Hilux? How high?

@HuajVam83 4 года назад

Do we need to grease the control arm up and the bolt? Mine keeps squeaking when I hit bumps

@RyvalCreative 4 года назад

Yeah I didn’t put that in the video actually but I did grease it

@HuajVam83 4 года назад

@@RyvalCreative cheerio for that. Looks like I'm gonna have to pull everything apart to regrease. Piece of cake just time consuming 😬

@MediaContentSolutions 4 года назад

Good video mate! Keep it up. And love the Luxy

@garethwalker847 4 года назад

you had any issues with these? im thinking about getting them as they are alot more affordable then camburg and ive seen very mixed reviews of jerrys ucas. only thing is theyll be shipped to latin america so not wanting to stuff up haha

@RyvalCreative 4 года назад

Gareth Walker no issues at all, they are great. I’d recommend them 👍

@garethwalker847 4 года назад

@@RyvalCreative awesome man, thanks

@andreidelosreyes7894 4 года назад

How to order control arm for 2009 fortuner & how much?

@RyvalCreative 4 года назад

Andrei Delosreyes I don’t sell them mate. just look up on google, you should be able to find something pretty easily

@MrJabzi 4 года назад

What's the cost of those uca

@RyvalCreative 4 года назад

Around $500 I think

@jaydenmarkham3003 5 лет назад

Any reason why you didn’t go with Phat Bars? They are pretty similar anyway right?

@RyvalCreative 5 лет назад

Jayden Markham yeah I think they are very similar I just work right near the guy who sells these so went to him

@wallacelux 4 года назад

thanks mate greaat video. got one of you fitting that snorkel ? i gotta n80

@RyvalCreative 4 года назад

Nah I just paid the 100 bucks to get that fitted haha not worth the hassle when it was so cheap to get someone else to do it.

@Pearo1986 4 года назад

No one said anything bout the missing washers or u had no dramas

@RyvalCreative 4 года назад

Talked to the bloke at the shop he said he doesn’t use them when he installs them either, I couldn’t find a way to make them fit. Not sure why they are in the kit

@Dan-jg7zl 2 года назад

No offense dude, but when I saw a bottle jack, a ryobi and a claw hammer, I couldn't stop laughing. You don't value your limbs much to work with your vehicle on a dodgy bottle jack. Get some axle stands man and decent tools to do the job properly.