How to Fix a Snow Blower Carburetor 

Great stuff but I think I will wear gloves.

thanks for the video. I forgot to empty the gas tank last year and now when I put gas in the snow blower it leaks over night. do you have any suggestion of what causes that.

The engine runs loud . Then shuts off after a few minutes. Which adjustment should I set

Gotta leave props where props are due. Didn't take care of my snowblower at the end of last season and paid for it. Went through all of this and boom, she's back in action! Thanks man.

You are awesome. I was facing Snowzilla expecting my 1 year old snowblower to fire up. It didn't. i tried everything but then today, with 2 feet of snow on the ground, I was able to rebuild the carburetor by following this video. After reassembly, it started on the 2nd try. You saved my back from great pain. You Are The Man!

Thank you! After watching this video, I was confident enough to tackle the job of rebuilding my carburetor on my snow thrower. I must have done something right because it runs very smoothly now. Thank you for sharing your knowledge!

Oh, it work, I used your method to clean up my snow blower carburetor and she running beautiful. thanks for your video. have a nice Holiday.

Good vid; I'd just like to suggest you point out to viewers which way the emulsion tube goes back into the carb so it's not put back in upside down.

I really appreciate your video. I watched it last night after a big snow storm and my snow blower wouldn't start. I thought I was screwed. I followed your instructions, put everything back together, and it started on the first pull. Now I can get my cars up my driveway. Thank you!

Super helpful. Thanks. Had to custom cut a couple gaskets to replace my worn out ones (apparently they don't make the OEMs anymore). Was able to get a new bowel gasket from my local Pehrson's Power Products (thanks guys).

thank you, good video. hopefully it will help me solve my problem.

Thank you very much for the detailed video! I am not knowledgeable in small engine repair and you walked me through it with no problem!

For the average guy, who wants to learn and save money, your video is fantastically clear.

This is excellent video.

i will try out and hope the wat you taught will start my snow blower

My friend great video. I highly recommend picking up a box of disposable gloves for messing around with carb cleaner and fuels.

Can I clean my gas powered pressure washer carburetor the same way?

Will have to give this one a try. thanks

Good video. Got Carbutetor Kit # 798917 and parts to replace the carburetor on my Briggs & Stratton 8HP overhead valve Snowblower --- The parts came without a "Intake Arrestor" - which the instructions says is Important. How important is this component? I don't recall seeing anything like it when I removed the old carb.

How do you adjust the carberater???? Tighten all the way down? ????

Best video I've seen. Great job!

I like your video thanks

Thanks! Great video!

Wonderful information and very helpful.

great job..thank you

I have an older snowblower with a different setup. I have a gas leak that I cannot pinpoint. The gas doesn't seem to be getting through to the engine. I seems to be leaking above the bowl. Can you help me to troubleshoot this leak. Thank you in advance.

I have toro snowthrower 2c ccr 3HP and the only way I can get it to run is by putting fuel in the spark plug socket but it only runs till that fuel is burned. I cleaned the carburetor good and put it back together, but it still does the same thing. Any thoughts?

Hi Mark, great video, gave me the knowledge to install my own carb rebuild kit!! However, once it's all back together and running, the throttle seems to be way too high. I have since taken the carb apart again and watched the vid several times, I believe everything is back together correctly. When it's running and using my fingers to move the throttle linkage all the way to the right (when standing behind the blower, from where I'd be pushing it), the throttle goes down and sounds like what I'd expect. But it doesn't stay that way, it seems to want to move to the left (outside) the way the spring from that plate is pulling it, though the spring doesn't really seem to pull either. Any suggestions at this point? I almost have it!! Thanks in advance.

good video

Useful. Thanks.

Jon Would explain how to replace the choke shaft asm (B&G 801418).

i have toro snowblower 87cc 4 cycle engine electric start it wont start what should i do?

Great video my brother! Just what I was looking for!

Excellent video on cleaning the snowblower carburetor. Take the rest of the day off! BTW: you might want to try using some latex gloves, so you're not bathing your hands in all the chemicals. YIKES! 50 7mil nitrile gloves for about $8 at discount tool stores. Use them all the time in the shop.

So we have a snow blower with a transmission we left gas in it an took today an they told that taking the carb apart cleaning or rebuild usually never works they said we probaly will need a new one is this true or a lie does rebuilding the carb really work

I've owned 2 Toro CCR2000e snow throwers and the needle seats on both of them started leaking over time so the snow blower started leaking gas all over the garage. Wasn't repairable so needed new carburetor.

If using an ultrasonic cleaner, do you still have to remove the jet and emulsion tube or will it still work without removing them?

Awesome vid. Thanks.

Does anyone know what model carb that is?

Terrific video! Thanks for taking the time to explain and show the steps so thoroughly! Awesome job!! Thank you!