How to fix PXN V9 Foot Pedal Controls - Gas, Break, and Clutch 

amazingly, this actually helped 2 years after posting. thanks bro!

Beautiful! Picked one up used from marketplace and the clutch was dead and break only worked half way... A vacuum, hot glue, and WD-40 and it's running great with full response from the clutch now. Next it's the loose steering wheel but I'm able to drive properly now!

Thank you so much, I was annoyed for like a whole week because I couldn’t play assetto corsa without my sim racing setup working properly.

you save my life，omg i just sad like 3 day already，because i play horizon 5 and get down about this problem。 you derserve my follow and like， thx man。sry about my 6 years old broken english have a nice day！

You're awesome man. A little WD-40 on the springs and some hot glue later, and mine actually works better now than it did when I bought it. Thanks.

i know you have probably seen this a lot but thanks yo i'm glad that there is someone out there that has a solution to this problem.

I didnt try this yet, but even if it doesn't work, your explanation was clutch. I never understood what the problem is.

I’m 100th subscriber let’s gooo

Anyone know what is wrong with mine the acceleration works fine but the clutch and brake are set as the same pedal and I can use the shifter any tips for it I'm playing beam ng drive btw

hi bro my clutch is not working when i tried it in the app its not detecting any signal

can we have a tutorial for the steering wobbling?

Mine says that I'm pressing down on it even though I'm not would this problem be fixed by doing this?

this is the exact same problem my pedals have, i'll try your solution and hopefully i don't have to buy a new pedal set 👍 thanks a lot

I have a question about the PX V9 because I bought it and a couple months later everything works but my pedals and shifter are not responding in game but when I test it in the app they work how do I fix this?

Hey man what's up every time I glue the thing it works and it gets better and it fixes itself but after some use after like 15 minutes 20 minutes it goes back to fluctuating so did that happen to you?

Thanks for this great video man, I was about to tore my savings by buying a logitech wheel due to issues on my pxn v9 pedals. the gas pedal is in 30% and the clutch at 60% all the time. Hope I can fix it with this procedure

Backstory, I know very little of sim racing set ups and bought this wheel about 3 months ago. Everything works fine after fixing this problem, but like you said in some other comments, it's probably bound to happen again. Before that happens, I was gonna look into buying one of the better pedal sets, something like the clubsport or something similar. My question is, if I find pedals that use the same output as the PXN-v9 pedals, would I be able to theoretically plug them in and play keeping the original V9 Wheel + Shifter? Ofc app compatibility afterwards may be questionable maybe. I would like to know for sure before I spend 300 on a pedal set I can't use yet, and I can't find anything on the internet about it.

i checked my gas pedal and nothing was moving that shouldnt be moving. i cleaned it and calibrated it but this flickering problem is still there. pls help i dont know what to do.😮‍💨😕

all of my pedals are jacked up and Ive had no issues since I got it for christmas. My brake is the only one that slightly works. Anything I can do to fix them?

Hey when I go into calibration and press the pedals I get no response at all only getting response from the steering wheel any idea what can be going on also my pedals are only break and gas

Thanks alot brother. I fixed mine

Clutch pedal went out. Turns out the Clutch chip cant disengage and stays around 60 - 69% engaged when not touched. However it works fine when being pushed. Just wont disengage. i think the chip is the problem

my white wire that is connected to accelerate pedal got cut is it game over for me ?

My acceleration is going to halfway and won’t go to max

I did this and it helped A LOT but whenever I press the gas in game it breaks and when I press the brake it still brakes and the clutch works perfect any way I can fix it?

I have a very annoying sound in them, I own a hori apex. The gas and the break. how do i fix that for no annoying sound more?

mine doesn't work on Xinput since it's been used with x360ce mapping, but all buttons on Dinput work, please provide a solution...

Hey, is your clutch staying at 50% ? If so how would I fix it

I can’t get my petals to work how do you set it up when you first use it?

I’m was having an issue that this video fixed so thank for that but I’ve been having this other issue where the pedal doesn’t start responding until it’s pushed down a little far so if you have a solution for that that would be amazing

Hey, when i hit the gas, it's doing another button and i don't know how to fix it. Do you have an advice?

I'm having troubles with connectability let's just say I'm playing BeamNG drive it will not boot up saying device not recognize and shut down the wheel

Thanks for the video . I bought one of these just a month or two ago and used it less then 10 times for ETS 2, never used it roughly and put it aside until yesterday when I plugged it in I noticed that my acceleration was less and less going to a dead stop, then it started working again ,then same thing happened. I was struggling to go at 10 km/h with pedal to the floor. The brake is fine and I haven't used the clutch or gear shifter so far since I bought it. I'm hoping this video solves the problem but pissed that there is a problem in the first place especially since its hardly ever been used. And I don't think mine is a dirt issue as after its used I put it aside and cover it with a cloth to protect it from dust. Any ideas what the problem could be? ......ok Its the next day now I opened it up and did as you did in the video and it seems fine now. I added a little glue to the top sides of the little circuit to hold it down better .Just gave it a test run on an ETS 2 delivery run and everything is ok. Thumbs up to you pal.

you're a legend man, thank you🤍

I have the same steering wheel and a few days ago it stopped working because when I plug it into the computer (pc) in the application to connect it, it takes it as a play station, something that did not happen a few days ago, how can I solve it, does anyone know anything?

Hello. I know that it worked for some people, but my acceleration pedal became worse. I could throttle up to 100%, but going there from 0% became more rough. Are there possible things I may have done wrong?

When i driving certrain cars it keeps hitting the max rpm in all gear do you know how to.fix it ??

copied from other video: thanks, mine also works better after just blowing it myself using my mouth lol, but apparently my potentiometer at the acceletor/throttle paddle is loose so I just lay in a plastic wrap (MAMEE wrapper lol) in between and voila it works fine, but unscrewing all those screws are annoying af tho, in other words try inserting a plastic wrapper folded to give more thickness and tension on the potentiometer board, mine works like a charm after. be careful not to damage the circuit especialy the tiny resistor tho.

Oh my God,thank you so much

Same trouble thanks for information

thank you

I can't to open the pedal cover

You my hero

Hii… does anyone here p KNOWS WHERE TO PURCHASE THE POTENTIOMETERS?? I couldn’t

My pedals just completely broke in half :/

I have a problem with mine where the brake pedal works as the gas pedal but also the gas pedal works as a gas pedal

For some reason my accelator is lagging I did a test with my controller accelerator and the controller accelerator was working better

Uhm i think my sensor itself is broken, i have it alone and it doesnt work properly

Hello brother i hope you reply back I got my pxn v9 working and i only use once My grandpa die and i didnt use my pxn for a week and now i try it my pedal aint working steering wheel and shifter working very well but the pedal didnt work this is almost brandnew can you help with this?

Спасибо,помогло

My gas peda stopped working

i just want to make the pedals more ferm

anyone else not able to get the potentiometer back into place

You save me

do you have a FB page?

the pxn v9 pedals is trash

i am not doing allat!