How To Fix Your Caretaker 5-Port Valve with an OEM Rebuild Kit - 5-9-2001

Подписаться 9 тыс.

Просмотров 10 тыс.

50% 1

LINKS TO PURCHASE:
Caretaker 5-Port Water Valve Rebuild Kit (5-9-2001): www.epoolsupply.com/products/...
Caretaker 5-Port Valves:
Caretaker 5-Port Complete 1.5" Assembly (5-9-2000): www.epoolsupply.com/products/...
Caretaker 5-Port Complete 2" Assembly (5-9-2200): www.epoolsupply.com/products/...
Caretaker 5-Port 1.5" without Plumbing THAK (5-9-2006): www.epoolsupply.com/products/...
Caretaker 5-Port 2" without Plumbing THAK (5-9-2026): www.epoolsupply.com/products/...
In this video, we take you through a full rebuild of the notorious Caretaker 5-port valve! We give you a full rebuild of one of Caretaker's most common valves the 5-9-2006. We use the rebuild kit provided by Caretaker (5-9-2001) from start to finish. We show you everything included in the kit as well as how to install and remove. Please make sure you check out the links below for purchasing. As always, thank you so much for watching, and please do not forget to SUBSCRIBE!
Rebuild Kit: #5-9-2001 Parts include:
5 Pistons
5 Ball Bearings
2 Large Housing O-rings
5 Small Port O-rings
1 Gear Assembly
www.epoolsupply.com
Visit us on social media!!!
Twitter:
epoolsupply?lang=en
Facebook:
/ epoolsupply
Instagram:
epoolsupply...

Опубликовано:

20 авг 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@keithkaras8431 3 года назад

Helpful tip... I’m in AZ and the large o-rings expanded a bit in the heat on the Fed-Ex truck. They didn’t want to seat properly. I put them in a tub of ice water for about 30 seconds and they shrank right down to the perfect size to install.

@ePoolSupply 3 года назад

Great tip! : )

@jeanfasanella449 2 года назад

My problem is the bottom part of the shell is cracked and leaking. Can you suggest how to seal the crack til the part comes in. I’m kind of desperate.

@chrisseven8420 3 года назад

Despite some problems during shipment, the installation was very easy. Thank you for the commercial actions taken... service to the top!... thank you again!

@ePoolSupply 3 года назад

Our pleasure! Glad we could help! : )

@SnyderGator1 2 года назад

This is one of the best DIY videos I’ve seen of any kind. Great work on this one and making it very approachable and clear and showing the possible pitfalls. You made this easy. Thanks so much!

@ePoolSupply 2 года назад

Wow, thank you! We really appreciate the positive feedback.

@SnyderGator1 2 года назад

I’ve completed the job and one additional thing I ran up against was that the pipes continually hammered when I turned the pump on. I actually took it back apart a couple of times to figure it out and finally left one of the ports pushed open and it worked and the hammering stopped. I don’t know if what I did solved it or if it just needed to work air out if the system, but that would be a great note to add.

@ePoolSupply 2 года назад

@@SnyderGator1 We will keep that in mind. Great job!

@dr.grantshapiro9029 10 месяцев назад

Fantastic. Thorough

@ePoolSupply 10 месяцев назад

Much appreciated!

@DrewMarble 4 года назад

Very good. I just received my rebuild kit from your store today.

@ePoolSupply 4 года назад

Hope you enjoy it! Glad we could help! : )

@danwas44 4 года назад

Thanks, that worked perfect!

@ePoolSupply 4 года назад

That's Great! Glad we could help : )

@evile1174 2 года назад

Hi- where does the second large O ring go? Just an extra?

@ePoolSupply 2 года назад

Hello, the O-rings are used for the valve top and as well as the center plate so to answer your question no it is not an extra O-ring. Hope this helps!

@ronaldweller2452 Год назад

What about the two washers, I did not see you put new ones in or did you use the old ones

@ePoolSupply Год назад

The washers are pre installed above the gears. Held together by the rubber band. I didn’t need to mess with them 🤙

@evile1174 Год назад

Hi, I did the rebuild a few months ago, all good, but now the valve housing is leaking. I think the large o ring needs replaced. Where do I get that? Part # etc? Thanks!

@ePoolSupply Год назад

Hello, you can find it here on our site with the link provided below. Hope this helps! www.epoolsupply.com/products/caretaker-5-port-valve-base-o-ring-kit-2-large?variant=31560415248469

@robbernath 2 года назад

Hi - just finished doing the parts replacement according to the guidance provided in this video, but am seeing two distinct leaks that appear to be tied to specific piston "zones." Any ideas what might be wrong?

@ePoolSupply 2 года назад

Hello, there could be a few different things wrong, and without physically being there it would be hard to tell or diagnose over the phone. You could reach out to our support and send some pictures in and we can do our best to help. Below I will attach a link that will take you directly to our page. Hope this helps! www.epoolsupply.com/pages/contact-us

@natethetoe386 Год назад

I think I messed up and added to much DE to my filter. I saw DE coming out of my popups and now a few of them don't come up at all. Is my caretaker full of DE and getting jammed up?

@ePoolSupply Год назад

Without physically being there we couldn't say for sure. Only way to find out is to open it up and take a look.

@charlieg936 Год назад

how to tell if I have a 5 Port or 8 Port valve or weather it's 2" or 1-1/2"

@ePoolSupply Год назад

You must measure the inside diameter of the PVC plumbed into the bottom of the valve. 1 1/2 will measure to 2 inches. 2-inch plumbing will measure to about 2 3/8's or something similar to that. Hope this helps!

@evile1174 2 года назад

One of the old little o-rings fell down into the pipe-- how do I get that out? I don’t see it. Will it cause issues?

@ePoolSupply 2 года назад

Hello, you can either go fishing which will be sort of difficult but it will not cause issues or harm if you cannot get it out. Hope this helps!