How To - Harley double pinstripes made easy 

Awesome. Great to hear!

Appreciate it!

No problem! Be sure to subscribe to my channel. I do plan on adding more in the near future

You bet!

I appreciate that!

ha ha love it!!!

Appreciate it....wish I could do more vids for everyone. I have one scheduled to come live tomorrow.

Lazer Red pearl is an awesome red. I've sprayed that quite a few times. As far as the pinstripes, I ALWAYS end up just matching Harley's pinstripes. I normally make up a pint of some of the colors, as they tend to use the same color pinstripes for other main colors through the years as well. That orange/red was used quite often. I would suggest taking a piece of your bike, possibly the side cover and just going through their chip charts. If they have anything like a color match book, this will show ALL colors starting with white and ending in black. Every page changes colors. You'll see page after page of reds. You will find your color in there that they can make up for you. If they have standard color chip charts, you'll just have to go through them until you find one close. OR, just get a regular bright red color and ask for orange toner (1/2 pint of each). Mix it approx 50/50 and that should be a great starting point

I've done quite a few painted stripes on stretched and non-stretched bags. Sometimes I 'swoop' the stripes down in an arc. Sometimes I'll just run them parallel with the bottom of the bag..along with other types of layouts. I use the same technique as in this video though. I may do a stretched bag video w/ stripes down the road though. Thanks for watching

Normally I just color match all the Harley pinstripes. If you don't have alot of paints in stock you can take the lid up to a paint supplier and pick out something that is close to the gold and they can make it for you

This is was done backwards, so the red pearl was the last color to be sprayed. No masking at all was done with this technique.

@@TAZattitude ok so I'm working on a gas tank 2tone paint job with a pin strip threw the middle of the colors. What advice can you give?

@@3rekoatskustoms929 What are the main colors and the pinstripe color?

@@TAZattitude the pin stripe will be red and the 2 colors are a pearl white and brown pearl

@@3rekoatskustoms929 I would do the complete parts in the white pearl first since it's a tri-stage. Mask off to paint the brown area using 1/4" or 1/8" fineline to layout where you want the 2 tone edge. Once it's masked up, spray a few coats of red along the edge of the 2 tone line. Assuming you want an 1/8" stripe, VERY carefully, butt your 1/8" fineline up against the 2 tone edge (add some 1/4" green tape overlapping the 2 tone fineline and the fineline you just laid down to eliminate any blow-through). Cover the red overspray and the remaining white in a couple coats of black (this will help the brown cover faster) Then spray your brown Unmask all very carefully Clearcoat... Watch too much painting against the edges. This is why you do the white pearl first...it's the thicker color

Pinellas Park, Fl

Ssshhh HD may hear you lol. Thanks JK. Love to find a painter soon. Gettin' up there in age lol