No video :(

How To Haul A Dirt Bike | The BEST Way! No Pressure on forks!

Подписаться 328 тыс.

Просмотров 254 тыс.

50% 1

Visit www.dirtbikech... get entered to win one of three bikes I’m giving away - Enter before December 15th 2020
Order your Parts from Rocky Mountain ATV/MC using this link to support DBC
www.rockymount...
Want to see the best way I've found to haul a single dirt bike in the back of your truck with almost no pressure on your suspension? This is hard to beat. I'll also do a recap of the best way I've found to haul 2 dirt bikes in the back of the truck with the tailgate shut.
If you’d like to see more about this trip, we made a short documentary while up there. You can check that out here:
www.dirtbikech...
Listen to my podcast Subscribe where-ever you get podcasts - dirtbikechanne...
Karen (my wife), Kaylee, Konnor Kase, and Kenzie (the kids) thank you for using these links. It is one of the ways we are supporting our family right now.
Fly Formula Helmet:
www.rockymount...
Motion Pro Digital Tire Gauge - amzn.to/2O9HXrZ
Klim Nak Pak in Lime or Black - amzn.to/34GGpvh
Water Bladder - amzn.to/2ZXaMyP
Garmin inReach GPS Communicator - amzn.to/2NWjTsA
Shinko 505 Rear - 546 Front and TUbliss set from Amazon - amzn.to/2QqNdtH
TUbliss front and rear set from Amazon - amzn.to/2LhEynD
Dunlop AT81 EX Gummy Rear Tire - amzn.to/2Lt164Z
Dunlop AT81 Front tire - amzn.to/2Ljl5nP
Shinko 525 Rear Tire - amzn.to/2NOwKgg
Pro Funnel from Motion Pro on Amazon - amzn.to/2FABIYa
AC Delco Torque Wrench - amzn.to/2TW3mEV
Armor All - amzn.to/2C3VABf
Multi Seal Tire Sealant - amzn.to/2SItOl4
Floor Pump - amzn.to/2SF8nRN
Shop Towels - amzn.to/2VD5UsP
Sony Action Cam
amzn.to/2LfBSXy
Graphics:
www.dirtbikech...
USWE Lizard 16 Riding Bag - amzn.to/2EdENyo
Klim Nac Pack - amzn.to/2ZPkpuC
Special thanks to my $10/month patrons on / dirtbikechannel
Michael Mercer, Daniel Schoon, Steve W, Alan C Sharp, Timothy Anderson, Raymond Woo, Steve H Hofsaess, Jeremy Slatton, Joe Siddens, Giles Fabris, Robert Boener, Craig Briscoe, Elliot Swan, Jason August, Chad Dwyer, Justin Stanley, Dave Anderson, Michael Peterson, Clayton Walther, Michael Abramo, Brian Falcon, Ryan Woodley, Steven Brady, Travis Winston, Kenneth Conley, Matt Williams, Keith Brothersen, Robert Kingsley, Shawn Clark, Scott Pickard, David Lindgreen, Rodney Smith, John Hengen, Dakota Jordan, Roland Thompson, Bruce Mesner, Salvatore Scarpa III, David Gagon, Rodney Jordan Stevenson, Craig Kelly, Thommy Simper, Michael J Hammond

Опубликовано:

4 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 302

@jordanrahm8555 3 года назад

Been strapping my bikes peg-to-peg for years and literally for 1000’s of miles. I can testify that this is a great way to transport your bike. The straps don’t even need to be “bow string tight” or have the bike in gear. The bike may move around a little bit but will never fall over. Even when bouncing around on rough Jeep trails.

@jeffmiller3295 3 года назад

If you're worried about hurting your fork seals or springs by cinching your forks down with likely less than 50lbs of hold strength for the amount of time you travel to ride you might as well just leave it on the bike stand in the garage. Imagine the forces seen during a full days ride with a 150-200 lb rider. This topic is usually opened up for selling a gimmick system to tie bikes down. Either way do what helps you sleep at night and Ride safe.

@charlesgunzelman3323 3 года назад

Exactly. The only "pressure" in the forks once cinched down is the spring. The oil is sitting at zero pressure anywhere after about .5 seconds.

@dormantmenace 3 года назад

We I have had forks blow in the back of the truck. I have also had them blow sitting on the stand. Twice on the stand 2 different bikes. Sometimes they just decide to give out

@charlesgunzelman3323 3 года назад

@@dormantmenace if they blew in the back of the truck, either the seal blew at the end of the ride, or the suspension was compressed to where the seal was sitting on a ding in the chrome. Or the seal is just has dirt propping the seal open to let oil through.

@ShovelheadMatt 3 года назад

@@dormantmenace yeah, thats literally not how shocks work. The pressure isn't constant. How do shocks on a 900lbs bagger seem to hold up?

@GravityRoller 3 года назад

@@charlesgunzelman3323 When a sealed hydraulic fork is compressed under load (static load like in tie-down scenario) its reduced internal volume (from being compressed) effectively increases internal pressure (pressure on seal). Spring has nothing to do with this internal pressure, other than the volume it consumes. This volume, being constant, does not change over compression range.

@dragaknee 3 года назад

I just tried the single bike strapped at the pegs method today and it felt more secure than by the handlebars. Better for the bike and more secure. So glad I found your video!

@OgreMoto 3 года назад

My buddy Jason showed me this method about 2 years ago. I've never carried my bikes around another way. It's so easy and put very little pressure on the suspension.

@RoknRivr 3 года назад

After watching this, I strapped to the foot pegs last week...love it!

@fsubulldog03 3 года назад

Fork seals take more of a beating while you ride than they do while being strapped down in your truck bed. Dirt and nicks in the fork leg cause fork seal leakage. With that said, do what make you happy.

@BicBoiDyl 17 дней назад

I started doing the foot peg mount in my truck, It feels so much more sturdy, and I don't have the anxiety of looking back constantly. Even driving offroad to get to a track, the bike stay put!

@Rieju300 3 года назад

Great video. Thanks! Perhaps in the future you can do one for shorter bed trucks (i.e. 5’ 6”) for optimal loading?

@TheChedberg 3 года назад

Ok I am ready for the KX videos! Never seen Kyle ride green (blue rider myself) and wanna hear his thoughts!

@scottarend6576 3 года назад

Yes. I have a 06 KX450F. hoping he does more kawasaki or Honda. Never owned KTM

@rocketj7449 3 года назад

And that my friends is why I bought a 6.5 foot bed. Another tip for easier loading-keep the truck stock height!

@nicholaswalsh6685 Месяц назад

Not sure what im doing wrong but it wont go against the front and is super loose

@kevincrownshaw4669 3 года назад

The step ramp referral name Kyle. Litterly gives you .01 off the price lol. A PENNY LMAO

@illhaveanother4365 3 года назад

Lol good shit

@glenncaldwell1254 3 года назад

4x4 block between the top of your tire and inside bottom of your fender on the fender mounts works great as well. Saves your fork seals that way too. Thanks for your video.

@Bubbleuprubberdown 3 года назад

Tight fit with two bikes in a Ford Ranger. I use a ReadyRamp truck bed extender.

@D-WAKE 3 года назад

A new body ranger?

@texasdirtbikerider3335 3 года назад

I hook em to the pegs now you probably saved me 10 minutes of unloading my bike! plus now I don’t bottom out my suspension in the truck.

@PA-Tammy 2 месяца назад

I have a AddABike rack and it's uses no tie downs at all just one arm over the seat and you go. Easy to get it on and off the rack unlike putting it in the back of the truck.

@VlogEpicness 3 года назад

100 percent agree. Save your fork seals 👌🏻👌🏻👌🏻

@3canctheayr 3 года назад

Compressing forks does nothing to hurt fork seals on spring forks. There's no load on the seals, ever. Been cinching forks for hauling bikes for 15 yrs without issue. Besides a static load when cinching forks is nothing compared to a hard g-out & your seals don't blow when that happens. They don't blow because they can't. Fork seals start leaking for other reasons.

@josh156b3 3 года назад

@@3canctheayr finally someone has it right. Seals seal off pressure so compressing them and leaving them there does not hurt them unless you get some ratchet strap and really go crazy. Plus more people have leaking seals on the stand because there is no pressure on the seal besides a small spring on the seal. When i worked at racetech it was the worst hearing people talk about seals lol

@VlogEpicness 3 года назад

@@3canctheayr sounds like we should do an experiment and see if that’s true.

@SpeedDemonExpress 3 года назад

Dirt kills seals, old dirty oil kills seals not compression.

@3canctheayr 3 года назад

@@VlogEpicness I've been doing the 'experiment' for 15 yrs. It works. Also, taking the time to understand how your forks are constructed and how they actually work could be helpful.

@jondoe4667 2 месяца назад

I strap from the handlebars but I always use a fork saver, or block of wood cut to length between the front tire, and the bottom triple clamp. That let's you strap it down really tight, and only compresses my forks about a half inch.

@peteracke2209 2 года назад

Most sensible video on securing you bike I've seen, well presented and very watchable..nice job. I have been using this method for years

@Eastern_SA 3 года назад

I found out that if you pin the front wheel to right corner and use the side stand, the bike will be safer if one tie down comes loose to avoid the bike falling and handle bar or lever hitting rear glass and breaking it.

@logant4222 3 года назад

who else wants to see him ride the KX

@nickdyas5412 3 года назад

It will feel new for sure he’s always on Europeans and Yamaha I’ve never seen him on a kawi but they look soooooo good

@ronaldwriston1546 3 года назад

So bad got my eye on one as well.

@Jj12915 3 года назад

@@nickdyas5412 I agree that Kawi is a beauty!😍🤩

@tylerpreston95 3 года назад

Big time!

@logant4222 3 года назад

@@ronaldwriston1546 me to

@AdamHowesPlastering 3 года назад

It's a myth that there is pressure on the forks/seals when tied down, that's not how they work.. once the oil has made its way through the shims it's stabilised, the only pressure is on initial compression as you are forcing the oil through a relatively tight space. I used to put a block between the fender and wheel and pull it down tight to that, only to make it more secure though, not to save the seals.

@painsrides3616 3 года назад

I saw you do this cross load in one of your "tips" videos a while back. I'm not worried about pressure on the suspension when I'm hauling, but I found the method to be very secure and quick to load\unload...been using it since... Thx 👍

@philldaman2320 Год назад

Good video man. Picking up my new dirt bike tomorrow and this is what I will do. Didn’t want to put pressure on my shocks

@SxSGetOut 3 года назад

I saw you do this a few years ago and I've done it ever since. It works awesome 👌

@JMotoAdventures 2 года назад

What straps are you using? I need to replace mine

@cobrajett11 3 года назад

Glad people are starting to use this method lol. It works so great. Never have issues with the bike suspension bouncing the straps loose on long hauls.

@Mark-mq1cc 3 года назад

Wow, just when I thought this old dog couldn't learn new tricks!

@jarydt1152 3 года назад

6 and a half food "bed" (tray) is unheard of for a duel cab "truck" (ute) in Australia. You American's are spoiled for choice when I comes to "pick ups" (Ute's) 😉

@jesseklassen2017 3 года назад

I’ve been using the same tie down style for about two years now to. Works way better but since you can’t see the straps you get looks and comments from people at times.

@logant4222 3 года назад

when can we see you ride the KX

@cwatson42785 3 года назад

Wow I'm buying my first dirtbike tomorrow and was nervous about securing it and this really set my mind at ease!!

@johnbergeson8180 Год назад

Don't take his word. Do some studying on how to haul loads before you start hauling your bike. This is a foolish way to haul your bike. I have been riding for 47 years. I have been strapping my bikes down and hauling them all those years. I have been hauling heavy construction equipment for a living for 30 years. I will never haul a bike the way this idiot is saying to do it.

@synshenron798 2 года назад

This is one of the only good reasons to daily a dually. I have an 8ft bed and its awesome. The 9-10mpg economy blows as a broke college student but hey, I can haul whatever I want whereever I want

@nine9sixSPS 3 года назад

I love my StepRamp but I wish I would have gotten the 5-step version and not the 6-step version. The 6-step version is great when I'm in my long bed but if I'm with a friend and their bed is shorter, it's a PITA to load with all of our other gear. Great video!

@k.b.322 9 месяцев назад

Same here, just sold my LB and gotta SB. Now I'm looking for a 5 step to trade my 6 step toward.

@jjsroofing860 3 года назад

Awesome ramp !

@danehauser8675 2 месяца назад

Cant use foot pegs on some aftermarket pegs in the lowered position. Use the plastic fork saver between tire and fender and youll never blow a seal.

@1SevenZero 3 года назад

Just be aware if you loose the bike and it falls the handlebars take out your back window. That happened to a guy who was demonstrating this method to me. Needless to say I don’t hall this way for that reason.

@KooLaidblue 3 года назад

Ok, I definitely must retry this double bike technique. I tried it on my 2500 ram and it was a no go by about an inch. I gotta check to make sure they are at full lock. It was in the back of my mind last time but I didn't act on it. The ram 2500 is 6'6". Gotta check out the step ramp too. Currently I use two curved folding cycle gear ramps and they work well.

@dc-pr6xt 3 года назад

with the ram 6'4" box two bikes with tailgate closed doesn't work. The ford and gm/chev is 6'6" and works as I used to have that. Damn 2" lol

@keithsada1380 2 года назад

How could having pressure on the forks hurt them? I've been hauling bikes for over 40 years that way and I've never had an issue.

@michaelanderson1727 3 года назад

When are you going to give us your first impressions on that KX?

@mattbillenstein 4 месяца назад

I prefer a soft loop around the frame just a bit above the pegs - the pegs are kinda brittle and take some abuse - I don't think it's unheard of to break them off.

@marklacombe2671 3 года назад

I imagine there will be some complaints with the KX. 1. The Fuel capacity 2. 5 speed Doesn't seem like they did a whole lot to make trail friendly but I could be wrong.

@bartman376 3 года назад

Great vid! I've been tying my bikes down like this for over 30 years, its the best way I've found even if your trucks bed is shorter and you can't close the gate it still works the best!

@mixtips637 3 года назад

Doesn't flip over easy???????????????

@bartman376 3 года назад

@@mixtips637 No not at all!

@AaronsEnduro 3 года назад

I love this!!! My whole channel revolves around sending pit bikes up some serious enduro trails!

@tieoneon1614 3 года назад

Excited to see Kyle try the Green 250x! But for the Luv of Gawd please ride it how it was intended, high in the rpm range cuz its a screamer. Dont try and lug a small CC bike and then say it doesnt have much power like u did on the xcf and yzfx.

@powskier Год назад

All you got to do is cut a block of wood that fits between your tire and front fender if you are worried about your suspension so much. Plus, it does make it more secure.

@SpeedDemonExpress 3 года назад

This will not save your fork seals. Dirt is what kills fork seals. I compress my fork when I load it in the truck and my seals last a very long time and I ride almost every weekend year round. The forks see much more compression when I ride it.

@court2379 3 года назад

It should not do anything to the seals. The only thing I can see being an issue is if the forks are not vented, so there is air pressure when compressed pushing oil out. Just vent them... The load is carried on the spring, and it shouldn't be affected by being loaded for any length of time a bike would spend in a truck. It would take months or even years to creep and lose force. Unless they are designed as over stressed to begin with, which normal riding will ruin them at that point too.

@MOTO809 3 года назад

The only problem with this video is that it furthers the myth that compressing your suspension somehow hurts it. Your forks can sit 10 years under load and be in MUCH better shape than 1 year of riding.

@cwatson42785 3 года назад

This method while great the only big negative is is takes away your rear view mirror which is why I might lean towards one side of the bed and just put some tension on the bars. I don't think the amount of force to keep it up right will hurt a suspension much on a offroad dirtbike

@droobiedee 3 года назад

Always just used a block between the tire and front fender. Worked great

@kengarvin5341 3 года назад

Bought the ramp last year, best one I have ever had. Had three old style ramps in my garage, got rid of them. Negative, very spendy

@smauller623 3 года назад

I have a fork brace to save my seals and even on the pegs like you have it with that angle and tightening while compressing the rear shock ur still putting pressure on the rear.

@drewhodge3366 Год назад

A $0.01 discount for using your name on a 300$ ramp 😂 great video tho much appreciated

@scottpeck1149 3 года назад

When hauling a single bike try the right side, so you can see to the left out of rear view mirror. Just saying, I like these ideas👍 thanks

@rz350yam 3 года назад

I can't help noticing that REALLY LONG kickstand spring on that KX. Bet that won't last long in the "soft enduro" terrain. Better safety wire it.

@whitewolfoutdoors3418 3 года назад

awesome technique im old school and was using the forks. How do you reccomend for a trailer though?

@olliechristopher467 Год назад

Not a bad way at all. I'm an old school dude. I use a bed buddy, center the bike and cinch the heck out of my strap compressing the forks. Been doing it this way for over 30 years and no issues with damaging the suspension.

@motorifico 3 года назад

How many came for the green bike?

@randyunsworth566 3 года назад

We've always done this since we first got into dirt bikes.

@brookscrocker1694 3 года назад

Lol not me. My bike tries to fall down every time this is really useful

@jonnynelson5663 3 года назад

I tie my bikes down via the lower fork/axle lug on the trailer with tank straps. Really freaked me out the first time I trailered 🤣. Like watching a baby walk for the first time. I’ve also used your dual bike recommendation for truck bed action. Works like a charm. Kyle always putting out good info!

@mikekinloch6049 3 года назад

A fella can just quickly and cheaply make a fork saver post to fit between front wheel and the underside of front fender to keep from deep compression of forks..or be a gear geek and buy one.

@devodar2579 3 года назад

What about the stress on today’s chincy foot pegs though?

@dawidswanepoel2523 3 года назад

This is a great tip because my bike has such stiff suspension sometimes the straps rip apart when it rebounds on the truck.

@Larrycbr1 Год назад

Thanks for the video very helpful!! what is the truck bed length? Thanks, Larry

@dellockett5096 3 года назад

Great video. Thank you Kyle. Can you tell us about that awesome loading ramp... well there it is. Thanks again

@sean7857 Год назад

🤑

@R0gersism 3 года назад

I just throw a block of wood between the fender and wheel, then tie it down. Works fine with no compression of the front forks.

@imds123 2 года назад

Wont the foot pegs break at some point?

@skypuppet9 3 года назад

Just tried out these straps today. They work great! I will try to swap out the connection as in the video for that adjustment. Thanks for the tip.

@elmert84 3 года назад

What’s the name of the straps?

@tariqthomas4758 Год назад

Definitely need name or link

@j0shll0yd 3 года назад

Excellent idea! Especially for us 5 ft bed guys.

@barnyardbrio7597 4 месяца назад

can't believe more people haven't figured this out

@fprintf 3 года назад

Why is it a problem compressing the suspension while transporting the bike? The metal doesn't fatigue, the shock isn't doing anything as long as the bike isn't moving up and down etc. However having the bike on its own weight the suspension while you drive will wear it out faster because the bike is moving up and down as the truck goes over bumps. One thing we do on our trials bike is put a youth soccer ball between the front forks and cinch the bike down onto the ball. This puts all the pressure from the tie downs into the ball and really locks things together so that bike cannot move up and down.

@kyleosbun 3 года назад

Just need to get you a fork saver. Also we dont all have full size truck beds.

@dougdill9458 3 года назад

I realize this is not related had no other way to contact I was wondering about front tires what should I run into ride in rocks and hard pack some sand would appreciate any help u can send I think your the bomb I respect what u say ty doug from Gunnison co

@titushutton792 3 года назад

Do you think it would be okay to pull a 72cc and a 150cc in a trailer?

@toddborn1365 3 года назад

What about loading it with a tonneau cover in a 5’6 truck bed?

@johnboy2251 3 года назад

That is a pretty bad arse ramp you got there. I will totally buy one if I ever start using a ramp.

@paulbaker7489 2 месяца назад

Trying to find a method to strap my Honda CRF 250 to my Gen1 Raptor Scab that can handle off-roading.. any suggestions?

@jstnumber73 3 года назад

I need you to demonstrate just how secure it is by testing out the trucks abs please... Great video!

@enduro-parts-aus 3 года назад

Footpeg tying down is so much quicker and easier IMO

@lomparti Год назад

Arent those straps kinda sketchy? Seems like with ratchet straps theres no way they can come loose but with the ones youre using they can come lose alot easier on accident.

@ShiftGearsMoto 3 года назад

It's not putting that much pressure on your forks unless you're cranking them down. Don't use ratchet straps and take the pressure off when you're not driving.

@FirstnameLastname-qc3xx 3 года назад

I just set mine up the same way. Gotta say I’m still super nervous but this is my first time hauling my dual sport (too far to ride it)

@bradymcphail9690 3 года назад

Very nice! learning big stuff Kyle, I’m gonna owe you!

@motox4289 3 года назад

I just recently got a f150 with a 6 1/2 foot bed and I was just wonder what kind of lift and what size wheels and tires you have on that it looks dope btw

@revenge5049 3 года назад

Isn’t that bad for your pegs

@jsflow9049 3 года назад

I got the same truck and fit 2 450s with the tailgate closed 👌

@derekvartanyan3110 2 года назад

What part of country was this video taken? Looks awesome! I'm from east coast.

@dirtrider2234 3 года назад

Yeaa waiting for that Kawi XC video, I have 19’ KX450 for the track which I’ve never felt so comfortable on a bike before like I do this one. I have a 19’ Ktm 300xc for the trails, and been curious how that kawi xc stacks up against it.

@skinnypedaldown5044 3 года назад

Great video kyle! Enough man........ride the kx! Just pokin fun brother son. 😁 We might have to wait till spring. I bet it's cold In Utah right now.

@chihuahuaverde425 3 года назад

Nice tips. Thanks, gonna need to try this.

@tonycerruto5157 2 года назад

I kinda like that step ramp!

@someoneyouknow96 3 года назад

Just cut a 4x4 the length between the tire and front fender and cinch the tie downs to the handlebars.

@MDavis91 3 года назад

Kyle, I def think you should check out the new Rieju bikes!

@tobygardner4302 3 года назад

Dude try out a Honda I race one and I wanna see your thoughts. They handle every well with suspension

@j.c.bishop6589 2 месяца назад

What straps are you using in this video or at this point in time?

@Crvmbs 10 месяцев назад

I really like the first method, but my rear wheel can’t get cinched on the box because there’s the wheel well there… ended up doing the second method with one bike, but if anyone has tips for that let me know!

@LoudFlashmedia 2 месяца назад

Where do I find a ramp like that? Steps and ramp combo?

@joshb6469 Год назад

Would you recommend trying these methods with a sport bike? I've hauled my bike no problem with the tailgate down, but this time I'll have a trailer. Unfortunately, the tailgate will hit the handle for the landing gear.

@darrinrailing6008 3 года назад

Looks like lake mountain coms road staging lot, is that where you shot this video? I'm to scared to push my bikes into my lifted truck, and not confident enough to ride them on. Any tips on that?