How to Install 4Runner Clock into 89-95 Toyota Pickup (lower dash disassembly) 

And so it begins....Inherited my stepmom's '93 truck with 118,000 miles on it two days ago, and one of the first things I noticed was lack of clock - even on the radio! Second thing was the slipping clutch - I can replace that, but first the easy stuff - find and install a clock! So time to cruise the junkyard tomorrow after getting the tires re-balanced - thanks for the info about the install!

Your vids are awesome! I started driving at 16 with a 2nd gen 4runner, and now reliving my youth in my little truck and doing the mods you showed. Thank you thank you!

Outstanding video. Thank you you saved me a lot of grief and the possibility of damaging any dash components when installing a new stereo and a digital clock into my 91 Toyota 4X4b truck.

I cant wait to follow these simple mod videos with my truck soon. Thanks for taking the time to make these. Subbed looking forward to more!

Thanks John, just completed this installation thank to your video.

Hey great videos. I'm swapping interior of a 93 runner to my 91 pickup and these are super helpful

Nicely done video... to the point and great visuals! 👍🏽

Thank you for this great video. Used this to put in my clock as well as a radio, finally! Thanks again.

Cool video Jon! I'm getting ready to upgrade my father in laws stock stereo in his 92 Toyota pick up. Disassembly of the dash looks easy enough. I just might hook him up with a clock too. Thanks for sharing man :)

And now I know how to get to the stereo... Thanks. Now of I can find where this "extra" screw goes!

hello there good sir my husband likes your videos a lot you're very helpful thank you for the video

After checking what seemed like a couple of dozen 4Runner's in wrecking yards, finally found one with a clock in a recent arrival! Warning - if you get one from a Toyota Surf (4Runner in North America!), the mounting tabs will be reversed because of the RHD!! I managed to cut them off and reattach with hot glue, so it will work for me - but extra work to install.

Great Toyota Videos!

Thank you -- so I have a 1994 pickup which looks like yours -- so do you think there is also an electrical hookup, a blue "faux plug" behind my dash too? I kind of want to know before I try to pull it apart!

Very good job and very creative! AAA+++

Sick vato!!

Great videos!! With your video help I visited a local junkyard to swap out the rear view mirror and dome light from a 4Runner - sweet upgrade. Improved the sound and cut down the rattling dramatically by installing 4Runner speaker boxes. Replaced my original '93 pickup crazed 3 instrument cluster with a clear 4Runner cluster that displays oil pressure (thanks to your video) and a tachometer (adjusted potentiometer and added a wire as you instructed). Of all things the clock has been the biggest pain. Three junkyard clocks later - none worked - I removed the springs and soldered the leads as per the Toyo forum. The clock's four plug has power on the bottom left plug and yet I cannot get any of the three clocks to work. Would you recommend buying a working (tested) clock from an online site or after three clock failures do you think it could be the truck wiring. I'm sure it's not a fuse because the dome lights work and the bottom left plug shows over 12volts. Lastly, the new fuel gauge appears to read a tad high - is there an adjustment for that? Thanks again for your video instruction - you have helped me upgrade my POS from a rattling bucket to a semi tricked out quiet truck I enjoy driving. Thank you.

Thanks!

hey man great vid was wondering where did you get your dashboard cover Thank you

Nice picked out a clock from a junk yard for like $5

Does anyone know what size the screws are for the clock?

any chance of tips to installing the cup holders?

Nice video! I have a 1990 base model; 22r with a 4 speed manual. Do all of the trucks come pre-wired? even the base models? Do you know the exact screw size for the clock?

I had an '87 and '91. Always wondered wth that blank square was for. Does your truck have A/C? Hard to install?

hello there good sir I was wondering if you knew if a massive air flow sensor will fit on a 93 Toyota from a 4Runner been having difficulty with the part is there a way to convert it

Do you have to take the whole dash out to get to the stock amp and the stock stereo

does anyone know if the 1984-88 trucks/4runners are pre-wired like this as well?? it would be nice option to upgrade to a clock in my 1986, Thanks

I’m trying to install one on a 88 Toyota pickup where’s the harness or do I have to install one for the clock ?

Do you think you could have just cut the panel out and then install the clock?

Is your top dash a hard plastic dash or is it vinyl ?

hey mate how did you put the cup holder in

What year is the 4Runner you're getting these mods from?

Does anyone know what's the light next to the left blinker is. It come on once didn't see what it is .

I need help installing a new stereo in a 1990 Toyota 4 runner can you help me out?

what year it was 4runner that youbtake it off?

Dam so that plug is just chilling there with nothing connected to it?

It must have a fuse to turn it on ???

To change the radio, do i have to remove the dash aswell?

My clock stopped working after I replaced the stock stereo, I see you don't have the stock one and your clock is working, any ideas why?

Does anyone know where I can buy this clock??

Where did you get the dash mat from?

What year truck is that?

Que tal, donde compraste el reloj, yo necesito uno para toyota 1992

what size are the rear speakers in the back?

How much did you pay for your clock? Mine doesn't keep correct time anymore and the replacement ones I've found online are outrageously expensive.

Hey man where do you source your parts from? I can never find parts in that condition

How do I plug it in?

No reason to pull apart dash just follow the last step

Rs