How To Install A Hanging Light - Step By Step Guide

Подписаться 35 тыс.

Просмотров 228 тыс.

50% 1

Industrial Kitchen Island Light here: amzn.to/3uEogNv
Great Inexpensive Tool Set: amzn.to/2Svpuu8
Edison LED vintage bulbs from Amazon: amzn.to/2tRB1I0
---------------------------------------------------------------
Other Home Repair videos found here:
• HOME
---------------------------------------------------------------
Please consider giving to Give Kids the World. One of the most joyful and amazing organizations for children: give.gktw.org/give/265729/#!/...
Thanks so much!
---------------------------------------------------------------
Not Sponsored.
Bruh - TheBeefmaster assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All material provided within this RU-vid channel is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. No information contained in this video shall create any express or implied warranty or guarantee of any particular result.
TheBeefmaster will not take responsibility of what you do with the information provided by this channel. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Beefmaster. TheBeefmaster does not make any claims of the safety of the projects, techniques, or resources listed on this channel. Please do not attempt anything contained in this video unless you accept personal responsibility for the results, whether they are good or bad.
-----------------------------------------------------------

Хобби

Опубликовано:

29 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 54

@msnetnetjones5093 Год назад

This was the absolute BEST video for beginners!! My goodness if only everyone could explained things in REAL beginners talk and showed the process clear and simple just as you did...I believe everyone would be diy " ers".

@Dumpster_Juice 2 месяца назад

You saved me! I’ve never installed a rectangle light before and when I took it out of the box and saw the 8” mounting strap (whatever it’s called) I panicked 😂 I had absolutely no idea if it was supposed to be screwed into the ceiling or put up in the ceiling and after HOURS of Google not having a clue what I was asking, I took my issue to RU-vid. Thankfully your video came up 1st and after a couple minutes I regained my confidence that it’s installed basically the same as every other light with the round mounting plate to the junction box and the strap to the fixture. I cannot thank you enough for this clear & concise answer to my unnecessarily overly complicated question 😂😂🙏💙

@elmslav 4 месяца назад

Yay, maybe I can even surprise my husband and try to do this while he's gone! LOL Thank you for the great, well explained how to video!

@dustinsicedragon 2 года назад

Thank you for the video. This was the best one that helped the most. My husband and I were able to put in our light. Praise God.

@beefmaster_james 2 года назад

Thanks for the kind comment. I’m glad it was able to help you.

@tracyfeldman9587 2 года назад

Thanks for having the patience to do this in such a thorough way.

@pham4041 2 года назад

Thank you for your tutorial! Definitely will do this soon

@cfarrow6194 3 года назад

This is the best one so far very helpful

@twhite2112 3 года назад

My new light needs to be shifted to be centered over the table. Can you mount the bracket to the ceiling (maybe with toggle bolts) rather than attaching to the light receptacle in the ceiling?

@dawnweeber6400 2 года назад

How do you know which goes to the white and Black when the two wires are brown as when you removed the first chandlelier? Thank you

@OviHentea Год назад

Re electric 'cap' aka twist-on wire connectors @4:37 you should absolutely make it tight, until the wires outside start twisting too. You don't want those caps coming off

@merlonglighting4810 2 года назад

Helpful for me ,thanks so much.

@noahrisser 3 года назад

Thanks Darrel

@r.walker6348 3 года назад

You're a very good teacher; only recommendation--actually show you pushing the electrical wires back up into the box, because I don't know if they need to go inside the junction box, behind just the base plate, etc. Newbies are going to be watching your video and we need every detail demonstrated. Thanks, again, for an excellent video!

@johnchen8888 2 месяца назад

Concise and clear guide: Thank you!

@beefmaster_james 2 месяца назад

Thank you for watching, John. I'm glad this helped you get your light installed.

@msjoy2005 2 года назад

I have a similar fixture but there’s two cords; one on each side of the chain. Did you feed the wire through the chains?

@dco8886 2 года назад

My light fixture has a blck, white, green and then a bare copper wire. Which one I use for ground? Either green or copper will work?

@simpliciocamirino2271 3 года назад

thank you for this your sharing.

@beefmaster_james 3 года назад

Thanks for the comment. Greatly appreciated.

@PIMPSTA951 2 месяца назад

Is that mounting bracket use for sliding the light over to the left and right? I need the light over to the side by 4"

@j.s3612 3 года назад

(see wrong) is the way you twist the wire is backwards. You twisted the ground correctly clockwise

@leslieviramontes3206 Год назад

I hung up a 5 pendalent light. Im worried with it being held with just 2 screws on the plate the light is too heavy since they dangle and move alot. Will the 2 screws hold down a 23lb light fine?

@karthikmahakud328 10 месяцев назад

very good instructions thanks

@beefmaster_james 10 месяцев назад

Thanks for the comment Karthik. It's good it helped you out.

@KingKatura 9 месяцев назад

1:09 I dont blame him for putting a heavy duty lock hook on thier some of those chains are flismy as hell. I had a cast iron one put up where i was & after about a year later i noticed it swaying every so often so i looked up & the chains pieces were pulling apart over time. It was a heavy duty chain too. But thankfully you can get lock hooks in almost any size & color. I ended up switching it with the one you have because the wife wanted it.. I prefer the cast iron but hey. It is what it is. Hawwah Great Spirit Bless. Also someone painted the black wire white but i tested it & black was still hot so it was pretty wierd.

@peppamint67 4 месяца назад

Great video

@beefmaster_james 4 месяца назад

Thanks for watching, peppamint67.

@erichgross7644 3 года назад

Why do you tighten the wire caps the opposite direction the wires were twisted? Doesn’t that untwist the wire tips underneath the cap? Shouldn’t you twist it same direction? Genuinely curious.

@sajanim 2 года назад

indeed it will. He did the ground OK

@nbk2O23 3 года назад

Hi Darrel! My question is what if the wires on the light fixture has the black wires? There’s no white or at least it’s not colored white.

@j.s3612 3 года назад

Call a electrician. Basically it doesn't matter what way . Only thing that matters are the grounds

@clarinetisfying 3 года назад

Hi it’s very helpful! I just have one question. What if your light fixture doesn’t have a ground wire? Thanks!

@sagarjha3933 3 года назад

There should be a green screw that you can attach the ground from the ceiling to the fixture, if not you just wire as is.

@KBDave-rv8dl 3 года назад

If its plastic. Don't worry about it.

@truecolors9319 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fRwNepFbLx4.html

@hugoponce5081 3 года назад

Right on!! Came up so handy that video.. thank you

@katherinecorrell4817 Год назад

"Admire the handy work by the previous owner" hahahaha

@healthyandrew5294 2 месяца назад

I hope me being hired as a lighting installation technician or HVAC energy auditor has some crossover. $18/hr hoping for more soon

@beefmaster_james 2 месяца назад

Congrats on the job. Well done.

@mikehopkins4040 3 года назад

Not bad .

@yampolito 3 года назад

I installed a similar light and as soon as the full weight of the light is applied there is a noticeable gap between the ceiling and base plate.. Did you get a similar result?

@lyricspencerbooks8467 3 года назад

What did you do?

@leslieviramontes3206 Год назад

I am having the same issue also since mine are icicle lights im worried its weighing too much down with just 2 screws holding it

@steelbeard151 24 дня назад

Don't trust that your power is off because you tripped the breaker. Those boxes are often mislabled, or they may be malfunctioning. Always use a multimeter to be absolutely sure your wires are not hot before you go poking around in the wall or ceiling boxes.

@toneloco1550 2 года назад

If your wires are too long, would you cut them to fit?

@beefmaster_james 2 года назад

Yes you can cut them, but try bending or folding them first when pushing them in the ceiling. It’s good to have extra slack wire if you replace the light again. Just make sure there is no exposed metal from cuts or nicks in the extra wire that isn’t being used.

@toneloco1550 2 года назад

@@beefmaster_james thanks for the response.

@theemo874 Год назад

Bruh 😭 I'm doing the opposite, we have a modern chandelier in my room , but my room has Victorian styled furniture with those curtain drapes , thus the modern chandelier isn't suiting much , therefore I recently got a victorian chandelier, it almost looks like this

@beefmaster_james Год назад

Nice. That will look good when you are done.

@user-zo8nb7ny1e Год назад

@MattBruns 3 года назад

Actually, the switch will cut off the current from the light because the light turns off. If you are by yourself and no one will turn on the switch you're fine.

@r3alfish 3 года назад

Unless you're in an old house with loop wired light fixtures like mine. In that case theres always a hot wire at the fixture even with the switch off. Learned the hard way.