A trick to cut the doors is to cut the difference out of the middle and use those pocket hole jigs to reattach the two finished ends. It would look perfect. Of course, some caulk and paint might be in order.
@@TheMrNobdy the inside of the microwave isnt as massive as the rest of the unit. Ductwork sucks air in through the filter at the bottom and blows it out literally atop the door.
Question my mobile home has a whole vent going outside I didn’t see you do any of that does it require to have that whole outside or we can cover it since the microwave would have its own fan etc….. A while back I hired someone from Lowe’s the guy said before doing anything I need an 20 amp like someone said here and to make an outlet for the microwave but what about the whole where the vent is now when removing the vent what happens to that…
Warning for anyone who wants to do this. The electric code requires that a microwave must have its own dedicated 20 amp circuit. Range hoods don’t require a dedicated circuit and usually run on 15 amp . If you’re going to do this then make sure you install a dedicated 20 amp circuit for the microwave to avoid problems.
Omg thank you for this video. This is TO A “T” what I needed to do for my microwave. From the built in cabinets to the exact placement of the wiring. I’m so confused about the music though 😂🤣 wtf was going on?! Excellent video regardless!!!
@@MoonpieCreations microwave’s up, secured, leveled and running! So id say it did! Did it all by myself thanks to your video. The instructions that come with microwaves are absolute garbage. Lol
Love your video, to the point, no nonsense, exactly what i have going on in my kitchen. Good enough for government work😁 I do better than it was carpentry and it just keeps getting better 😊
lol, nahh I don't ever monetize my videos. I do it just for fun. When an ad comes up it means I am using someone else song that has a copyright. But the videos will continue. Ken
Too bad for cosmetic look of cabinets over microwave that would’ve looked better to flip cabinet doors the other way around so seam was at top portion...js yet now seeing your video gives me idea how to run electricity thanks 😊
Thanks Kelly, glad you got something about it. I really wasn't worried about the cabinets as I was replacing them in a few weeks. But yes the seem should have been up to make it look better. Ken
Electrician here. Not code compliant. That box is designed to be in wall and not mounted on the exterior wall. I would have used a cut in box and ran the wire through the wall. Cleaner look and code compliant.
Code is written so everyone else makes money out of your wallet. Makes no difference if you put in a blue box inside or outside the wall. Sure, inside will look way nicer vrs outside, which looks slopier but way easier.. and who will the wiser to pull out the microwave to look ?!? I personally like things neat so I'll put the box inside the wall in my daughter kitchen... it's coming soon.
If the original wiring went to the hood vent it was probably part of a circuit including lights and/or other receptacles. Is there a general rule of thumb for making sure the install won't trip a breaker?
If you’re installing a microwave, you have to have a dedicated circuit. I ran a new line. Your manual will tell you what size breaker you will need to have. This one was changed to a 20 amp breaker.
@@MoonpieCreations is the necessity for a dedicated circuit because it’s the above range type as opposed to counter top microwaves that use an existing wall plug in the kitchen?
@@jkimo1178 it is dedicated by code where you live. A countertop microwave usually has around 7.5 Amps. The larger microwaves like the over the stove microwaves can pull up to 15 Amps. With that much power being drawn, it, may trip the breaker if you have other things on it.
Robert Evans I see the Air Force is now letting the straight wing live until 2022 at which time the F35 will replace it. Hard to believe the A10 has been around since the 70's.
The gauge and amp of a stove wire depends on the stove's power rating. The microwave would require it's own dedicated wire. The wire I used was black clad 12/2 wire. But it was replace a month later with newer 12/2.
How do I take the micro wave out . And have the vent and overhead light like the before picture. I dnt want the microwave. At all . But I need the vent over the stove.
Maeve, Your Microwave should be installed just like this one. As for installing a fan, I would follow the manufacturers installation process. Sorry I couldn't be more help.
That didn't look too difficult. I'd have to have a step stool in the kitchen, over the stove microwaves are not compatible with us vertically challenged persons. lol
Depending on the code in your area you may need to vent the fan outside. In my county an unvented microwave is ok . But there is always a fan integrated into the microwave. It just vents back into the house from the top of the microwave.
In my area yes. But like I said in the video this was temporary until I replaced the cabinets. When I took the old cabinets down I redid all the drywall and electrical wires.
The microwave hanging hardware is readily available on Amazon. But I would call your microwave manufacturer and they can give you a mount model number or they may sell them. New under cabinets microwaves come with them. Ken
I need to do this to my kitchen as well. My only concern is putting in the electrical outlet myself. I have a feeling if I do it wrong I'll cause an electrical fire
Nice install Ken, I see one in my future, could you've cut the doors in half and reglued them after sizing them to fit, just a thought. I liked the A10 action, I see them here in Tucson Thanks for sharing. Chuck
Actually I thought about cutting them in half and bringing the two sides together, but gluing and reinforcing the doors would have been more of an undertaking. I like it easy. I controlled those bad boys for 23 years. Love them. Ken
Yes you do need a 20 Amp circuit, but check the wire. If it is 12-gauge you are okay, anything lower and you need to rewire. Mine was 12/2 wire. The manual should have your amps the microwave in it.
I installed what I did as counter space is at a premium. A plain hood would not have helped and I would have spent more money as I still needed a microwave. Ken
CY it has two fan setting. When I set it to low or off if the stove area starts getting hot it automatically bumps up to high. It cools down quickly. Ken.
I don’t think I can’t tell in the video but did you leave the back of the cabinet panel against the wall in or did you cut that up as well. I’m not sure how to go about that
one question. if its not vented will it over heat the microwave? I have never installed a built in microwave before but would like to. you got a nice one there and the install looks simple enough. thanks.
No the fan on the bottom side recirculates by venting from the top of the microwave back into the room. The exit vent is above the door. You can change the fan around to have it vent to the attic or into the wall also. Ken
Quick question, don't you have to patch that ventillation opening above the microwave? It still has opening which might cause air to come in from outside?
I didn’t have one that vented to the outside the hole you saw just vented it to the top of the cabinet. If you have a vent that vents into your attic (shouldn’t be like this but sometime people do it wrong) or to the roof I would say yes you would have to plug it up somehow. Or just vent it outside if it goes through your roof
@@MoonpieCreations LOL the only way it's "ventless" is if you don't turn on the fan. Units that are equipped with a charcoal filter traps some particulate matter and odors, but most of the heat and moisture, along with some types of particles, stay in the house.
The National Kitchen and Bath Association recommends that the bottom of the microwave should be no higher than 54 inches above the floor, which would allow for 18 inches of clearance between the microwave and the typical cooktop height of 36 inches. A clearance of 30 inches between the top of a range would be for a cabinet.
No, the microwave was a 110v model. The only thing you must make sure of is that the circuit can handle the amps. This was on a 20 amp circuit and this model microwave is a 1000 watts so it will take about 8-9 amps. If you have to many plugged in items on that circuit it will continuously trip the circuit. Ken
In my user manual it states that a separate circuit is recommended "serving only this appliance". Do you feel that this is an example of over electrical engineering or do you think I'd be alright?
@@MoonpieCreations nice!!! I have a 1984 kitchen & will probably have to do something similar to fit a microwave. I don't have a budget to replace my kitchen cabinets
Ken Moon - Moonpie Creations just wondering those units draw about 15amps all by themselves,by no means am I finding anything wrong just want you not to have any trouble with popping a breakers!!😳😳😳😳😳😳👍👍👍👍👍regards BobLee
Bob. Not an issue it's why I do videos so people get the gist of how to do something. That may be a question someone comes across. The microwave plug is on the same breakers as the wall plugs along my counter. The manual for installation say to put oven on its own 15 amp breaker, but the microwave will only pull 5 Amps. So I don't think it shouldn't be an issue. I had my microwave, coffee maker and toaster going at the same time and it was okay. Ken.
Microwave range hoods require a separate 15a circuit. The proper way to convert the wiring to a box is using a wire mould box and connector if retro fitting. New construction we run a 3 wire to the fridge and then 2 wire out to the range hood. Thus 2 circuits one for the fridge one for the microwave. But what do I know for being an electrician lol
It's really not to hard. But you have to remember to turn the power off lol. But seriously I do hire out some electrical work. Sometimes it better to have a professional do it. Ken
Have you had any problems with light flickering on tripping the breaker? Since is a shared connection. Every where I look seems like majority of people recommend having its own lime from the breaker box
I have two outlets in line with the Microway. I have yet to have any problems with flickering lights or anything else. We have to make sure that your circuit is large enough to accommodate the microwave and anything else to put on those outlets. If possible I would use its own circuit but in this case I did not have that luxury. Ken
Antonio Rivera The microwave instructions will have an electrical requirements section that will tell you the amp circuit breaker that you will need. This one was 1000w microwave and the suggested amp circuit breaker is 15 or 20 amp. I went with a 20 amp. Ken
I hope it's your own house and not a professional job, this is not up to code and is done overall poorly. Thanks for the video though, it helps to see how other people did what you're going to do.
@@MoonpieCreations sorry I picked the wrong words, what I wanted to say was that the way how wires are screwed with neutral longer than it needs to be and the ground wire not completely under the screw seemed like it could be done better. As for code, is it #12 protected with GFCI & AFCI breaker? If yes, then the only clarification would be if the receptacle is/has to be 20amp rated cuz it seems to be 15amp rated.
Although that is an option, I was redoing my cabinets soon and the replacement cabinet was the smaller one. So this one was in for only a short time.Thanks for watching. Ken
Andre Cherkasov Thanks, I think 🤔. I did say the cabinets were going to be temporary fix. I replaced all of them. Lol good luck if you do it. It’s very easy. Ken