Replacing a bathroom showerhead is usually as easy as unscrewing the old showerhead and screwing on the new one. This video shows you the tools and techniques you'll need to replace a showerhead without crushing or scratching fixtures.
I've changed showerheads before without using tape and not had much problem with leaks, but today I changed one and had leaks no matter how hard I tightened. I went to Home Depot, bought a small spool of teflon tape for about a dollar, and voila, no more leaks! I will definitely use the tape from now on.
I watch the entire video went to couple stores got what I needed. I came home watch the video,paused... do you what said....played the video again pause .....do the next part. Boom I'm done. Thank you thank you I am woman hear me roar. This video was very helpful.
I also appreciate that there isn't some awful music playing while being expected to read(really fast) step by step instructions. This vídeo is perfect!! Thanks!!!!
My daughter brought home an energy saving kit from school and in the kit was a new shower head. My daughter is in need for a new one and with these simple steps you just showed I can't wait to try it now. Thanks!
Wiring is not fun and can be dangerous. You don't know who did what, when or how. My dad was very handy when he could see (glaucoma, like Ray Charles) and he was doing some wiring standing on a radiator. Yeah. He felt a buzzing in his legs! Had he been barefoot, it could have been EXTREMELY BAD. That's one of those things, you always want solid rubber soled shoes and a plan if it goes to hell. An assistant. With a broom handle. If you get a good zap on A/C, it can make you grab on and you won't be able to let go. Wood doesn't conduct electricity. You give the zapped person a good whack or a pry to get them away. DON'T TOUCH THEM. You'll get zapped, too! There's one up here where the metal back of a fridge became a serious conductor. The electrician showed not only could it light a light bulb (low draw), but it ran power tools (!?) Just fine, too! Power tools, heating/cooling things, air fryers/hair dryers, curling irons are HIGH DRAW things. In old houses, or houses you don't know EXTREMELY WELL, you can kill yourself. Or blow a fuse, at the very least. Which isn't good and you don't wanna go there often. Knowing the house EXTREMELY well, means you know ALL the circuits and what's on them.* All the outlets are wired correctly (10.00 tool at hardware store, you just plug it in and it tells you. It's idiot-proof), all junction boxes are right, all light fixtures, all of it. Anything 6 feet or less to WATER, needs to be GFCI (ground fault circuit interrupter). It has little reset buttons on it. NEVER, EVER assume it was "done right!" Don't assume a man knows/cares wtf he's doing. Even if he's LICENSED! Don't assume any company has a licensed electrician. ASK, and get that IN WRITING. They'll send someone over, CHARGE YOU like they have an electrician's license, and they don't! Never assume a SIMPLE damn thing is done right! Unless you KNOW FOR A FACT, 1,000%! We're talking about something that can easily kill you. Don't be stupid. Don't stand in water/damp. Don't go without heavy rubber soled shoes. Don't plug cell in where there's no GFCI in bath/kitchen/where water/damp is. A girl was killed for lack of GFCI from an extremely low draw cell charger. She was in the tub. It SHOULD have made the circuit shut off! See? *if you don't know what a circuit is, you should be supervised before doing anything. Not being mean, it can just mess you up. Been zapped a few times. Light switch as a kid. Pond pump that WAS on GFCI (had to reset when it rained!) And it STILL zapped me! It SHOULDN'T have. But, did I KNOW, 1,000% for a fact, WHO wired it, HOW they did it and if it was even RIGHT in the first place (obviously not, if I got shocked!) A: NO. My OWN fault! I WAS wearing heavy soled rubber shoes, too! Trust NOBODY, Scully! Remember, rubber doesn't conduct electricity. Neither does plastic or wood. Electricity is always trying to get to the ground. Don't ever get in its way. Well worth it to hire a LICENSED electrician to show you some stuff. Use library to read up on that. Time Life books has a whole series on Home Improvement. Make sure it's been revised. Codes change over time. You want to know all about fuses, circuits and all that FIRST. The basics, at least. Plumbing GENERALLY can't kill you, THO my cousin wired up conduit (metal tube for wires) next to plumbing, which is BEYOND STUPID. And he IS a licensed electrician!! Case in point! So, when it leaks, (eventually, it will) it's right next to wiring! Great move, huh!?
Here’s what you’ll need: 1) groove joint pliers 2) adjustable wrench 3) an old tooth brush 4) two rags 5) replacement shower head 6) pipe thread or teflon tape
This 11 year old video was during a time when youtube videos did not b.s. you with 10 minute filler "knowledge" in the form of "please like share subscribed," trailing off into sub topics, pointing out things that are unnecessary, comedy, repeating themselves and finally getting to the thumbnail topic but then explaining it in a way that's bleeeep. Then distracting you from this with entertainment so you forget your time was wasted and you end up liking the video anyway.
I bought a replacement shower head online and it didn't come with any instructions or anything, just the shower head. I was worried that I wouldn't be able to replace it. This video makes it look much less challenging. I also didn't know I needed some of those supplies, so that's great to know before I get started. I can't wait to enjoy a new shower! Thank you so much!
Thank you! It had been a number of years since I last needed to install a shower head. I remembered it being this simple, but I wanted to make sure it genuinely was that simple and not my brain playing tricks on me. Thank you!
This was a simple, easy to follow video! Thank You- I successfully removed the old head and installed a new one with a handheld shower. It's the little things
You can use a scouring/scratch pad or the reverse rough side of sponge to remove old sealant tape or anything else in the grooves if you don't have an old tooth brush.
A good quality shower is a quality of life boost. Also, the water sealing is mostly done by the O-ring. The Teflon tape lubricates & protects the threads, and helps maintain tightness. It also aids in preventing a leak, but the O-ring mostly does that. You should still definitely use tape. I had a junk shower head I dealt with for years in my old apartment. Installing a new head transformed the experience!
Omg the most simple Awesome 👌 video ever. ALL OTHER VIDEOS THEY TALK UNWANTED THINGS AND ANNOY. THIS VIDEO IS EXACTLY WHAT I WAS LOOKING FOR. THANK U SO MUCH!!😊
Omg took me 3 minutes! Love videos that dont tell me 25 minutes stories about their dead grandpa. Switched out both showerheads in less than 10 minutes!!!
Our master bathroom has a standing shower with handheld shower head. We started to see some rust spots in the hose not to mention heavy mineral built ups in the shower head because our house has very hard water despite water softener we have. My wife picked out this handheld shower head to replace our old one because she loves the brush nickel finish to match our bathroom decors but this turned out to be very impressive handheld shower head. Although I have replaced shower heads many times in the past, it came with nice instruction on how to replace it for those who's not familiar with it. My only advise would be to use wrench to hold the base spout when removing and installing the holding adapter so you don't accidently twist and damage the base pipe when you over tighten it. I really appreciate that it came with plenty of plumber's tape because you really want to put that on before connecting different parts so that there's no water leak in between threads. This is one of most common mistakes and reasons why there's leak after installing it. Very happy to see that they have provided plumber's tape to remind you to use it! It also had rubber rings/washers in each connector but it also came with extra one, which is nice. They also included a shower drain cover to prevent hair from going in to the drainage, which is a nice bonus. I really love the brush nickel finish, which makes it look elegant and expensive. The 7 different water spray setting is nice to have so you can change it for different purpose. We will most likely leave it on one setting for most of the times but it's nice to have option to change it when needed, such as jet spray for cleaning the shower wall, etc. After replacing the shower head, I didn't see any leak and the stainless steel hose feels sturdy. I also like that I can rotate and tilt the shower head holder and it stays in place. Overall, very happy with this shower head! amzn.to/3gVZIrH
Make friends with controlled corrosive cleaners. 30% vinegar is one. CLR is another. DON'T get these one you. Wear goggles, jic. They burn. Copper brushes work well, too. Sometimes, you can't get any further, so make friends with a plumber and cook for them or give them a lot of referrals for a discount. Tip them a good 50, too, if they ran right over or picked up the phone at midnight. Ask them to show you stuff while they're there, as none of this is this simple in reality. Lol. Kitchen faucets are THE WORST. I'd GLADLY pay them for that. You can get it, with the faucet tool (can't be done w/o it) but you STILL can't grab it! If there's a trick to it, I'd pay to know what that is.
Literally thought before clicking this video "People really need help changing a shower head?" Clicked only to see I've liked this video already. This is what taught me 9 years ago when I moved into my first place. 🤦♂️ 😅
They're showing you NEW STUFF. OLD STUFF is a whole, 'nother animal. And extremely uncooperative. Like, you wrench the pipe and the whole thing collapses.
Beware some heads have a circular nut and an adjustable wrench will not work for that. You will need to use pliers instead. Thanks for the instructions!
Thank you very much! I have never done this before and my husband will be shocked when he comes to see me Saturday at our Beach house when he steps into the shower and the showerhead has been replaced by ME! lol... Thanks so much!
Worked for me but I needed a vise grip pliers rather than the crescent wrench for taking off the old shower head. I just couldn't get enough grip or torque with the wrench.
I just had this problem, too, Robert. Do you have what we call a "cheater bar"? It's a hollow pipe of some pipe that will fit over your crescent wrench handle. This should give you enough leverage with its added length to get it unstuck. I just did it.
That's a good idea Emily. To clarify, the problem I had was getting a crescent wrench to hold its grip on a round tube, it would slip. the vise grip pliers blew that problem away.
It only took me 2 minutes to replace my Aunt's showerhead from an old fashioned 2.5 GPM low flow to a beautiful Waterpik Easy Select handheld. Showerheads are easy, no different from changing a light bulb.
Hi, nice video. I have been living in an older apartment building for over 10 years. My unit has 6" shower arm with 1/2" connection with IPS thread and shower head with 1/2" connection with IPS connection. All new shower arm and heads I found has NPT connections. IPS connection and NPT connection do not match. But can I take out my current IPS connection shower arm and install NPT connection shower arm? Like I was thinking of getting rid of both the old 1/2" IPS thread shower arm and shower head first. And then install a new 1/2" NPT threading shower arm with teflon tape to prevent water leaks and NPT shower heads in their place. Is that possible if the wall holes accommodate? Is it even recommended to replace IPS shower arm with NPT connection in an older apartment unit? Can you or anyone please help with answers? Thank you.
@RCDawg85 The "nut" on mine is mostly round, and at first I thought I wouldn't be able to use a wrench. But it turns out that two sides of it are flat, so I can use a wrench on it after all.
My problem is getting the shower head off. It seems as if it's rubber cemented in. I tried unscrewing it with a wrench like this video, and it won't even budge. Help?