HOW TO INSTALL A ONBOARD AIRCOMPRESSOR / Best budget ONBOARD AIRCOMPRESSOR / KINGS / THUMPER MAX

Подписаться 867

Просмотров 6 тыс.

50% 1

HOW TO INSTALL A KINGS / THUMPER MAX ONBOARD AIRCOMPRESSOR ON YOUR 4X4 / TRUCK / UTE / MITSUBISHI TRITON.
DISCLAIMER: Im not a professional mechanic. But had a basic knowledge on 4x4 truckS , CARS.
I used my own funds to make this video and never been paid or sponsored to create this step by step installation video.
If doubt on DIY please I highly recommend to hire a professional mechanic to do the installation to avoid risk on warranty claims and other possible damage on your vehicle.
Where to buy: www.ebay.com.au/itm/Mitsubish...
Most of the materials I've used on this project can be bought on your nearest auto shops. some of it just drop by on ebay or Amazon.
Thank you for your time on watching our videos hope it gives you an idea on your installation project. If any questions regards on this video please feel free to leave a comment. I'll be in touch.
Please support our channel by hitting like and subscribe buttons for more updates and videos to come. See you on the next one!!!🤙🤙🤙

Опубликовано:

16 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@worldwide_will 5 месяцев назад

The main power wire looks a little small for that length, might wanna check if it’s warm during operation. Safer to upsize the awg for safety. You just use the built-in safety switch for using the inflator no? Or did you install any pressure switch? Neat and nice installation. Thanks for sharing.

@buildwithnic 3 года назад

Soo happy for you guys looking good in the camera 🙌🙌

@letsgetitonadventures8919 3 года назад

Thank you very much❤

@paulcrouch6928 2 года назад

Great job What brand air piece are you using to pump tyres Thanks

@eugenealejandro8627 3 года назад

astig bro! may natutunan ako ngayon.. keep it up!

@letsgetitonadventures8919 3 года назад

Maraming salamat ❤❤❤ mabuhay po kayo👍👍👍

@ruthzie1030 3 года назад

keep it up :)

@sajjadal-azzawi8126 Год назад

Hello mate, just a fast question I’ve the same compressor can i use 30 or 25 amp relay? find it hard to get 100 amp relay

@himashwijesekera2401 3 года назад

Hey bro, great work! Does the relay I get have to be waterproof since it might be exposed to water in the engine bay?

@letsgetitonadventures8919 3 года назад

As long as the location of your relay will be high enough it will be alright. Have a great day!!!

@ronaldsurendra5993 2 года назад

Hey great video Whats fuse sizes u using Cheers

@letsgetitonadventures8919 2 года назад

Thanks for your comment. 90 - 100amps

@trolzealot8635 Год назад

@@letsgetitonadventures8919 the cable you installed does not support 90-100 amp

@saharaescutia6402 2 года назад

How many amp is anderson plug?

@letsgetitonadventures8919 2 года назад

Hi how's going.thanks for your comment. I'm using 50amps on its. It still works for me as long as I used a 6mm - 8mm wire.

@mijone 2 года назад

Hey mate, done the same setup on my ranger but notice when flicking switch on sounds like the compressor is straggling and isn't getting enough power with weak air pressure. Disconnected and ran compressor straight off battery and it ran fine, any suggestions?

@letsgetitonadventures8919 2 года назад

What wire for using? At least 6mm - 8mm wire will do. And what's your relay?

@mijone 2 года назад

@@letsgetitonadventures8919 i used 6mm 50amp twin core auto cable and 12v DC 100 amp h/d split charge winch relay (WM686 RL/180-12)

@letsgetitonadventures8919 2 года назад

Hi mate sorry for my late response. How's going on your compressor?

@Joes-Adventures71 2 года назад

That air compressor has a 120 amp surge on startup. It blew my 100 amp breaker repeatedly. Switched to a 125amp breaker and all is well. I also used 4awg wire but only a couple feet from the battery.

@mijone 2 года назад

@@Joes-Adventures71 so the 120amp circuit breaker works good aye? My auto sparkie mate reckons 150amp breaker should do the trick but haven't done it yet as im running directly off battery. Once i get the chance and find room to position the bigger breaker ill put ot together. Cheers