Тёмный

How to install a Programmable Integrated Tail Light on a 2017+ Kawasaki Z650 / Ninja 650 

TSTindustries
Подписаться 154 тыс.
Просмотров 26 тыс.
50% 1

Restyle the tail section of your Kawasaki Ninja 650 or Z650 with the TST LED Programmable and Sequential Integrated Tail Light. We designed the lens to accentuate the body lines of your Kawasaki and packed it full of 100 high-power LEDs and 9 programmable light modes. For more info see: bit.ly/2XjLKsE
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
Follow us on Instagram here: / tstindustries
Follow us on Twitter here: / tstindustries
The body lines of the Kawasaki tail now extend into the lens, continuing the design language and creating an overall look that is far better than the Kawasaki stock unit. Hexadome lens elements incorporate modern style with an efficient light dispersing method over the running light and turn signal lens area, while the hexagonal flat elements handle the brake light lens section. Each lens element ensures that the 100 high-powered LEDs are taken full advantage and produce an incredibly bright light output. The 9 programmable light modes are activated by an easy to access program button on the enclosure so that you can quickly select the mode that fits you and your Z650 / Ninja 650 best. We outfit each tail light with plug and play wiring so that you can spend less time performing the installation and more time riding. All you have to do is plug it in, and you're done!

Авто/Мото

Опубликовано:

 

24 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 69   
@Wabbit1961
@Wabbit1961 3 года назад
I installed this with the Elite 1 fender eliminator. The Elite 1 gives you a license plate adjustable angle which is nice. Simple install. Great products. Plug and play is important to me. Have to buy the flasher relay but you can reach in by hand on the mins 650 and not go through the fairing removal that these guys did. Flash rate is set but you can adjust it. I slowed mine down a bit and it takes a couple flashes before it assumes the set flash rate from stock setting. No biggie. Bought Hepco Becker C-BOW saddlebag mounts. Cheap, tight to the body, not ugly, install is a breeze, and choice of several bags. I chose the Royster bags. Luggage system for about $500. Very sturdy.
@letmebehomie6185
@letmebehomie6185 5 лет назад
Looks good. I didn't know I needed this until now
@TheEosos
@TheEosos 5 лет назад
You guys should make one of these for the newer SV650. All of your LEDs tail lights look really good.
@TheGrimloche
@TheGrimloche 2 месяца назад
For the 2022 z650, the tail light has plugs for the 2017+ and the 2020+. you just use the ones that work with your bike and can ignore/tape off the ones you're not using. I got the smoke for my 50th anniversary edition. Looks great. I'm working on installing the quadrix D sequential rear signals to go with it.
@TSTindustries
@TSTindustries 2 месяца назад
Thanks for the comment and update! We haven't been able to get a 2022+ model in-house to film updated videos but luckily we are aware of the differences in parts and install processes.
@EnjoiiGirls
@EnjoiiGirls 5 лет назад
Already got me a set
@julesonural881
@julesonural881 2 года назад
ou puis je commander le nécessaire pour avoir ce led intégré? le lien en description ne marche pas
@imgrabov
@imgrabov 3 года назад
awesome, adding this to my cart
@TSTindustries
@TSTindustries 3 года назад
Go for it!
@jakebruce8736
@jakebruce8736 3 года назад
Do you know if this set up is legal in the UK?
@user-mx2bb7nd4h
@user-mx2bb7nd4h 4 года назад
I plugged in my I regraded taillight,first I had A quick flash on bright then I push the button and had steady brake light flashers did work but had no Running late just steady brake light
@TSTindustries
@TSTindustries 4 года назад
You will need to contact our customer service department through our site with a clear description of what the symptom is that you are experiencing. It is tough to understand your description but it sounds like a simple issue of rear brake read switch floating around closed position. Our guys can help you solve this.
@patricksifuentes1068
@patricksifuentes1068 10 месяцев назад
Where’d you buy those adapters? Thanks in advance!
@carlosalvarez9877
@carlosalvarez9877 5 лет назад
Finally!
@syntheticXstasy
@syntheticXstasy 5 лет назад
You guys should list the tools you use, I've been looking for a set of hex keys like yours for a while and would love to know what you guys use!
@spinfowars8958
@spinfowars8958 4 года назад
I would like to get this tail light and I am interested to know if I can keep my original turn signal fixtures which are fitted with LED bulbs and splice into the source power and have all of them working together . As I assume that all the intelligence of the tail light is integral; I also assume that if I have LED bulbs in my existing tail light fixtures that it will not be a problem . Please advise .
@TSTindustries
@TSTindustries 4 года назад
Yes, you can absolutely do that. We actually did that setup on the bike in the video at timestamp 9:29 ( ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Xp_1HH1D5j8.html ). We sell special Y-splitters for signal function that do not require splicing anything. You can see them here: tstindustries.com/tst-kawasaki-y-style-signal-harness-splitter.html
@geman741
@geman741 Год назад
is it possible to just have the small bars beside the LP be the turn signals? I kinda like the X design on the stock 650 brake light
@TSTindustries
@TSTindustries Год назад
Those are standalone signal lamps. You can keep your OE tail light and use our BL6 signals for the signaling function. Your best bet is to check out our entire product offering for this bike, watch some of the videos and then choose the parts that fit your needs.
@murilloribas3615
@murilloribas3615 5 лет назад
Hello TST, I am from Brazil and I have a yamaha R6 2010, I have your flashlight, I would like to know how do I leave it in sequential mode ?! Thanks in advance!
@TSTindustries
@TSTindustries 5 лет назад
If you are talking about our integrated tail light then you are out of luck my friend. That light was designed back in 2009, before we made computerized tail lights with sequential modes and programmability. The best we can do for you is a brake light modulator that will alter your brake mode patterns and can be adjusted. You can see it here: tstindustries.com/tst-brake-light-modulator-yamaha-suzuki-oem-tail-lights.html
@atdhemorina3348
@atdhemorina3348 5 лет назад
Ordered this along with the fender eliminator. You guys have a video up for the z900 . What about this bike
@TSTindustries
@TSTindustries 5 лет назад
I believe you are asking about the video for the fender eliminator....please correct me if I'm wrong. The Z650 is identical to Ninja 650 in parts and assembly procedure in regards to fender eliminator. We launched that part and video a while ago.
@TSTindustries
@TSTindustries 5 лет назад
And here's the link to the video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NFVmbmylBmk.html
@atdhemorina3348
@atdhemorina3348 5 лет назад
Oh okay, didn't realize they were the exact same. Thanks so much for the reply! Looking forward to installing your products!
@XxTRUEPINOYxX14
@XxTRUEPINOYxX14 2 года назад
Would it still be possible to do integrated tail light/pods with the 2020 Z650? As we have a whole different wire harness, it’s a bullet connector converters. And I don’t think they make Y-Splitters for them.
@TSTindustries
@TSTindustries 2 года назад
We haven't made Y-splitters for this harness configuration yet so we don't currently offer a true pluggable solution to what you are requesting. That being said. The connection of signal leads from our tail light to our harness converters for the pod signals is pretty easy. Only the positive signal leads from tail light need to be connected because there is already a connected common ground on that circuit. So only two wires (green, brown) get connected to the yellow wires on the signal harness converters. You can hard wire, solder, or simply posi-tap with same connectors as we use on our license plate light setup.
@XxTRUEPINOYxX14
@XxTRUEPINOYxX14 2 года назад
@@TSTindustries okay cool! Thanks for the response! I haven’t ordered the pods yet as I notice the connections were different. But I think I’ll be good with the integrated rear light. Will replace the fronts later on.
@jasonreyes25
@jasonreyes25 4 года назад
Would I still need a brake light modulator if I get me this programmable tail light?
@TSTindustries
@TSTindustries 4 года назад
Not at all.
@albertolopez6377
@albertolopez6377 4 года назад
Just installed my taillight on my 2019 ninja 650 and my turn signals work but my brake lights dont , what could be the problem . All lights stay on when I turn bike on.
@TSTindustries
@TSTindustries 3 года назад
I think that our customer service deparyment would be a better source of the solution you seek. We have people that will troubleshoot with you and get your setup straightened out.
@CASVSXX
@CASVSXX 4 месяца назад
Do I need to have the flash relay on a 2019 z650?? Or is it optional
@TSTindustries
@TSTindustries 4 месяца назад
That bike does need the flash rate stabilized after changing front and/or rear signals to LEDs. If you don't already have an LED flasher relay on the bike i suggest installing one when you do the signals. -BR
@berndelignie8002
@berndelignie8002 2 года назад
Dem added this taillight to my ninja 650 2022. And the connectera are different :/ any tips?
@TSTindustries
@TSTindustries 2 года назад
Please contact our customer service department through our website.
@youwish3439
@youwish3439 2 года назад
Is a 2022 the same
@GermanPhenix13
@GermanPhenix13 4 года назад
After I installed my taillight and BL6 turn signals on my 2018 Ninja 650 I have a long delay before they start flashing. Is there a fix for that problem.
@TSTindustries
@TSTindustries 4 года назад
What do you have in there for a flasher relay? Is it the OEM unit or aftermarket?
@GermanPhenix13
@GermanPhenix13 4 года назад
@@TSTindustries it is the TST gen 2 flasher relay that I have in there
@11447777
@11447777 4 года назад
where can I get the cable splitter
@TSTindustries
@TSTindustries 4 года назад
TSTindustries.com
@dilaskass6799
@dilaskass6799 Год назад
are there any available today?
@TSTindustries
@TSTindustries Год назад
Of course. All you gotta do is check our website out.
@rbon2wheels
@rbon2wheels 3 года назад
great videos as always. i have a question. their are two connectors under the passenger seat 1 with 4 pins and the other is 2 pins, what is the use of the one with 6 pins? thank you
@TSTindustries
@TSTindustries 3 года назад
I don't know exactly what plug you are talking about but I am assuming something that sits in a foam block and is not connected to anything. There are connectors in the seat compartment used for communications, diagnostics, and accessories.
@rbon2wheels
@rbon2wheels 3 года назад
@@TSTindustries yes u answered my question. Thanks
@jaywalker3485
@jaywalker3485 7 месяцев назад
I followed the link & it states this tail light is for 2017-2019 models, will it work on a 2024?
@TSTindustries
@TSTindustries 7 месяцев назад
In 2020 Kawi started using different connectors for the signals so we had to update the tail light. If you are on the website, go to the top and input your mak/model/year info and the correct version parts for your year will show up.
@jaywalker3485
@jaywalker3485 7 месяцев назад
@@TSTindustries Is install process generally the same?
@TSTindustries
@TSTindustries 7 месяцев назад
@@jaywalker3485 it is. The connector sockets are the only difference
@LarryBarbosa
@LarryBarbosa 4 года назад
wait, where can i find that mandalorian sticker tho? that actually looks dope
@TSTindustries
@TSTindustries 4 года назад
You can get those on ebay and etsy
@rendeltb
@rendeltb 3 года назад
It is the way
@user-mx2bb7nd4h
@user-mx2bb7nd4h 4 года назад
Where is the flasher relay location for the 2020 z650
@TSTindustries
@TSTindustries 4 года назад
From our understanding it's on the opposite side of the steering neck. So left side instead of right side.
@user-mx2bb7nd4h
@user-mx2bb7nd4h 4 года назад
Not near the neck, behind side panel
@TSTindustries
@TSTindustries 4 года назад
You will find the info in this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fjZM4yerQCg.html
@Variiiqz
@Variiiqz 2 месяца назад
is it legal in germany (has it e,abe,ece)
@TSTindustries
@TSTindustries 2 месяца назад
Not at this time.
@joshuastreete9554
@joshuastreete9554 3 года назад
Do you deliver to the UK?
@TSTindustries
@TSTindustries 3 года назад
Yes, directly from our website.
@juancirilio1993
@juancirilio1993 2 года назад
how can i order this? im from the Philippines
@TSTindustries
@TSTindustries 2 года назад
I think WeBike serves your area
@MrBigpimpin14904
@MrBigpimpin14904 3 года назад
Coupon codes any deals going on?
@TSTindustries
@TSTindustries 3 года назад
Not right now unfortunately.
@EnjoiiGirls
@EnjoiiGirls 5 лет назад
😍😍
@HawkLad
@HawkLad Год назад
Only issue I’m having is that sometimes I feel like I’m in an alien homosexual night club when the music plays in this video
@TSTindustries
@TSTindustries Год назад
The only escape is by navigating to TSTindustries.com and pressing the goat icon when you find it
Далее
Ultimate Tail Tidy Mod for the Z650! (Super Bright)
11:17
Я читаю переписки сына
00:18
Просмотров 628 тыс.
CLANCY 🦞 Operation Squid Ink (New Brawler Animation)
00:58
НАШЛА У СЕСТРЫ СЕКРЕТИК
00:36
Просмотров 357 тыс.
Chain Adjustment on the 2017 Kawasaki Ninja 650
8:46
How To: Honda Grom LED Flush Mount Turn Signals
11:56
TST Tail Light & Fender Eliminator - '18 ZX-6R
18:04
Просмотров 1,6 тыс.
Cracked Windscreen Restoration!
0:41
Просмотров 3,9 млн
ОПТИМИСТИЧЕЫЙ ТРАКТОРИСТ
0:19