How to install an subwoofer amplifier chevy Tahoe 2015 and up

Подписаться 30 тыс.

Просмотров 100 тыс.

50% 1

Line output converter amazon affiliate link amzn.to/2G5DOTI
Posi-tap line out converter taps amzn.to/3j9fQpu
Recommended 4 Gauge Amp Kit amzn.to/2R0BUpI
Recommended 8 Gauge Amp Kit amzn.to/3jMmrpN
BUDGET 4 gauge amp kit amzn.to/32ZHiPD
BUDGET 8 Gauge amp kit amzn.to/3lNGYMm
most notable difference is that the PREMIUM kits use OFC (oxygen free copper ) which conducts electricity much better and the budget kits usually are not true 4 Gauge resulting in less wire strands
Budget will be alright for most amps but if your running more than 400 watts rms power I recommend the premium amp kits
Learn how to install a amplifier to your factory stereo on your 2015 and up chevy Tahoe with this video

Авто/Мото

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 79

@audiogod2929 3 года назад

I do custom car installation this is a great starter video for someone looking to get started. Thank you for sharing

@lsmith3907 Год назад

Have not installed in about 8 years - great refresher!

@ganeshnarayan5505 2 года назад

Hey Bro your video is one of the best i saw on you tube. thanks for sharing.

@connectedcaraudio 2 года назад

Thank you man worked hard on it

@dsoto9172 Год назад

GREAT VIDEO

@loganjetton6134 4 года назад

I prolly would look at the video llj audio did one a Sierra 2500 had. They make a great harness and products. Wish I would have know about them sooner

@916denio 2 года назад

Thank you for this video, I've been poking around the fire wall for an hour.lol

@Beachbum001 6 лет назад

What size ring terminal did you need for the seatbelt bolt for your ground ?

@joshuaventura6485 5 лет назад

would it be the same wires color for a 2017 silverado??

@KRedgrape 6 лет назад

I have a 2008 Chevy Suburban LTZ and I can't seem to find where the white wire and the black/blue to hook up the RCA would it be a different color on my year

@ghislainpitre7899 5 лет назад

If I wanna get a Limitless Lithuim battery, I no longer need a battery up under hood?

@TheCuban.45 5 лет назад

Thanks for the video.

@daevpizarro Год назад

Do you know the number or name of the fuse slot that you used the add-a-circuit to?

@angrEyeholes 4 года назад

What are the color codes for the radio if I want to run wire my speaker wire to the radio?

@Catholic1391 3 года назад

Am trying to find a place to put the amp I don't think my amp will fit under that seat Orion HCCA 3000.1 I have a 2013 Tahoe is the wiring the same?

@bossindicators6765 Год назад

Will this be the same when installing on a 2015-2020 Escalade?

@anthogottstaxx3317 3 года назад

Where do you hook up your ground?

@stingk5295 3 года назад

2019 Tahoe Connection. Where to connect this Unit? To add an amp for Existing Speakers no Subs! Advise Thanks

@luisin321123 3 года назад

If I want to run 2500 rms ? I follow the same process?

@daevpizarro 2 года назад

great video, if you have a 17 you need to tap the bose amp, drivers rear quarter. if you tap into a rear mid range speaker you will send a mid/high frequency to the sub which won’t sound right. I have a question for you, how many feet of power cable did you use. i have about 15’ and i’m afraid it’s not enough. lol

@connectedcaraudio 2 года назад

Thanks for the extra info I’m sure someone here will find it very useful And I’m sorry I don’t remember how many feet I used but try to put the amp on the same side as the battery that way your not having to cross the power wire in in the engine bay to reach the battery

@videographybychance8653 Год назад

What if your tahoe is a 2018 and has bose, but doesn't have the subwoofer?

@arringtonsmith1019 Год назад

So where do I tap into the low range speakers at in the 17 Tahoe with Bose

@daevpizarro Год назад

Do yourself a favor and buy the pac audio amp pro. Using a line output converter or audiocontrol LC creates more headaches. I used a harness that plugs into the clip that plugs into the amp that is located rear driver quarter.

@bossindicators6765 Год назад

@@daevpizarro Do you happen to know the wire colors to tap into at Bose amp? Thanks

@markytrees 2 года назад

What fuse did you tap the remote to? 10 amp does the amp turn off when truck is off?

@ryannedits Год назад

Fuse 8 SEO RAP

@adrianford3544 3 года назад

4:53 It's a what wire? What you say foo I heard that!

@rondunlap4984 2 года назад

Great video! But I got a question, you had rca cables from the head unit and from the inverter, so which ones went to the amp??

@connectedcaraudio 2 года назад

I wa showing 2 different methods to run rca You have to do one or the other Hope all is well

@dirtym4702 2 года назад

Does this video take into consideration the Bose system and making the connections in the correct area?

@z.stammer3396 Год назад

I tried through the door speakers and got to low of out put. I'm going to try near the stock amp. See what happens

@austinthomas8875 Год назад

@@z.stammer3396 did you ever figure if out

@walteralvarado3640 Год назад

Did you ever figure it out I'm trying to do my 2016 with boss system

@walteralvarado3640 Год назад

Can you tell me where is the factory amp location

@adrianp_1135 4 года назад

I connected a line output converter to the wires that you showed and they sun would play very lil I connected a 6x9 to the white and blue/black wires and it played good so what could be the problem?

@theonlysheepkoophere8492 Год назад

Because he didn't get the right signal he got voice signal for some reason

@austinthomas8875 Год назад

@@theonlysheepkoophere8492 what's the right one

@theonlysheepkoophere8492 Год назад

@@austinthomas8875 I will let u know in a min

@terrancemitchell8755 6 лет назад

On 2013 my amp stays on when it put it in that fuse box. Why is that and is there any fix for it?

@connectedcaraudio 6 лет назад

Try a different fuse that reads 0 when the car key is in the off Position and 12 volts when you turn the key to the acc position.

@JuanCruz-cr2py 4 года назад

My subs are connected to the amp and when I press the gas the subs make a loud noise but if my door or windows are open then the noise goes away on a 2016 esv Escalade

@bigge3421 4 года назад

sounds like you need to change the ground point of your amp also DON'T run your main power wire for the amp on the same side of the rca plugs.

@edziuman 4 года назад

Juan Cruz. Sounds like it is due to the Active Noice Cancelling. You need to either cut the mics (not recommended) or purchase an ANC bypass harness. I also have a 2016 ESV and had to do this.

@420sycoholic 5 лет назад

I tapped into the left rear speaker signal wires(2017 tahoe LT with factory sub) and noticed the signal was pre processed (low frequency absent) making my bass sound like crap. So i dont recommend this for bass on this suv.

@meathead1011980 5 лет назад

420sycoholic you have to go into the Bose amp 4 wires... in the center console

@420sycoholic 5 лет назад

@@meathead1011980 ok which wire pair color signal will work for my 1 channel amp. And any vids on how to reach amp? Thanks man.

@MannyYaBoii 2 года назад

@@420sycoholic hey bro I know it’s been 2 years but I’m trying to hook up the loc and there still isn’t any information on the internet on wire diagrams for these SUVs. Did you have any luck in the center console and what wires if you did.

@theonlysheepkoophere8492 Год назад

Do you have the take the seat out

@Nutrageous27 3 года назад

Where are you located ?

@Ricky_Rocha 5 месяцев назад

Can you do this with a factory radio and not a aftermarket radio? If so what’s needed?

@lestdatexan 5 месяцев назад

This video is for a factory head unit. An after-market radio you wouldn't have to tap the speaker wires you would just run rca to the input in the back of the radio.

@Ricky_Rocha 5 месяцев назад

@@lestdatexan thank you for the reply. It will help me for my self install.

@grimereaper6994 5 лет назад

Do u know the peaker cable color for the driver side rear door

@420sycoholic 5 лет назад

Green and green with blk stripe on my 17 tahoe

@nesco7615 4 года назад

Bro awesome video. But I’m still nervous of doing it myself. I don’t want to fuck shit up. You have a shop if you do where? 👍🏽

@Certified662 3 года назад

Hey my words are coming thru my subs what can I do to change that

@connectedcaraudio 3 года назад

Activate your low pass filter it might say lpf on amp turn it to 80 hrtz

@armandogarcia2579 4 года назад

I just don’t know y you didn’t installed the amp on top of board ? You don’t want the heat of the carpet on the amp!!?

@connectedcaraudio 4 года назад

Putting the board under the carpet helps keep the board in place. I feel that it’s better then having to drill the board into the metal of the vehicle. Better for leased vehicles and rust prevention

@edziuman 4 года назад

The way he did it keeps the board in place without the need to drill into the body. What you could do is add spacers between the amp and board to lift it up off the carpet a bit.

@z.stammer3396 Год назад

I tried all of this and my output didn't push my subs. Great video though.

@connectedcaraudio Год назад

Did you have the Bose system

@connectedcaraudio Год назад

If there is a factory sub try tapping into that instead

@walteralvarado3640 Год назад

I have bosses them on my tablet 2016 how can I hook up my amplifier to push two 12in speakers

@palerider55 7 лет назад

CRIMP ONS? This is NOT the way to do things. You should SOLDER all those connections with heat shrink.

@masloco35 4 года назад

Five hundred 20s he’s right tho

@artiemcbride629 5 лет назад

I do not like what I just watched. These fuse taps and wire taps and last but not least never run your power wire under your car.

@DirellAlexander 4 года назад

why not, many wires run under the car

@smackface6 4 года назад

@@DirellAlexander including fuel lines and transmission fluid lines which are explosive and flammable

@chrisgarabedian5406 6 лет назад

No,no,no. Power wire under the truck!? Fuse tap!? WTF!? Lmao!!! There's a boot under the dash and there is switched power in the box under driver's dash.

@digitalnatalie7475 3 года назад

Cutting an extra hole in that boot = Leakage ; Power wire under vehicle = Possible fire or fried electronics (if your lucky)

@joefalcon6134 Год назад

You video shots are too close. You cant really see where you are at. Move back away to give perspective.

@hmoobdude5111 3 года назад

Car Installation 101: running the power wire under the vehicle is a NO NO. Ask any pro installer

@digitalnatalie7475 3 года назад

Yep, your asking for a fire!!

@meade916 2 года назад

actually no it's not. It's perfectly fine to do so.

@skydale5386 2 года назад

It's electrical wires running all under your car. starter, transmission, abs sensors, ride leveler etc..This is no different then putting LED glow lights under your car. Hot wires are connected to those also. This will be ok