How to install and code BMW N55 Injectors (EU5 F30 335i)

Подписаться 295 тыс.

Просмотров 65 тыс.

50% 1

- Chapters -
00:00 - Intro
00:50 - Tools
02:25 - DIY (Replacing Injectors)
22:49 - DIY (Coding)
Here's a link to the product we installed today:
Bosch EU5 Injectors amzn.to/3jIR2r2
Ancel BM700: www.amazon.com/dp/B0871TQR9J/...
Helpful tools for this job: www.amazon.com/shop/kiesmotor...
Online Service Manuals for almost ANY car: bit.ly/emanualonline
-----
Hey Everyone,
In today's video, we show you a no fluff DIY for installing EU5 Bosch injectors in your N55 motor and we demonstrate this by using the 2013 F30 335i. For this install there are a few specialty tools required which are linked above.
See the links at the top for the products we installed, in addition to links for some helpful tools!
Shop for car parts @ www.KiesMotorsports.com
Email us for questions on Products & Services @ Info@KiesMotorsports.com
Follow us on Instagram to see what we're building @kiesmotorsports
Follow us on Facebook @ / kiesmotorsports
See the tools we recommend: www.amazon.com/shop/kiesmotor...
Here's a link to the lift we use: amzn.to/3gWo97s
Special Discounts:
Use code KIES8 @ Tirebuyer.com to get 8% your tire purchase!
Thanks for watching and please try everything at your own risk.
Bryan
Kies Motorsports is an Authorized Dealer of: ProTuningFreaks BootMod3, BimmerTech, AWE Tuning, Evolution Racewerks, CSF, Pure Turbos, Kratos Turbos, FTP, Variant Wheels, Fuel-it, Studio RSR Roll Cages, MST Performance, Burger Motorsports, VRSF, Bilstein, H&R, Injen, Borla, Dinan, GoFastBits, Depo, VMR Wheels, BBS, Sparco, Snow Performance, Nitrous Express, AFE, Akrapovic, Eibach, Hawk, Fifteen52, Koni, KW, Seibon, Stop Tech, Vorsteiner, Wagner Tuning, Wilwood, and many more incredible brands!
This description may contain affiliate links. By purchasing a product through an affiliate link, you'll get the exact same price and Kies Motorsports may earn a small commission. By purchasing products through affiliate links, you're helping make this channel possible and we want to thank you for your support!

Авто/Мото

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 110

@claudioagmfilho 2 года назад

Awesome vid Bryan, as usual, thank you so much for sharing it… 🇧🇷🇧🇷👏🏻👏🏻

@josuefuentes3681 2 года назад

Damn Brian wish you did some that were reused, i have a early n55 e 93 and it is neglected with videos or even info, you are so much help bro, i need to change my valvetronic motor but i was thinking of doing all injectors just because i heard it is easier. Keep up the good work and i love your Red beamer. My e93 also red, just not lambo red tho 😂 mine more like coca cola red, gang stuff. Fyi i read that if you release the gas cap it helps relieve some of the fuel line pressure. Ik you probably know that anyway. ✌🏽

@Top_g80comp 2 года назад

Fantastic video 🤘🏻💯

@Sally-nd5pc 2 года назад

Thank you so much for your share!

@bjcoley3173 Год назад

Awesome video!

@ianyoung6829 3 месяца назад

great job

@Musclesmarinara 2 года назад

Great vid as usual 👍👌....how many miles till the one injector failed??

@greggersch 2 года назад

Always like the details in your videos like showing the dimples in the bracket and how they should be oriented towards the injectors. Those details are great. When you mention details like torque specs, have you considered calling those out with numbers displayed in the video, so it's easy to see the exact value you are referencing?

@ademc8872 2 года назад

Nice vid! Did you have any issues with the originals? Or were you getting codes?

@sweetscience3770 2 года назад

What was the torque spec for the flare nuts u torqued using the crowfoot connecting the injectors to the rail?

@parthdinubhai 2 года назад

Ive heard based on other factors the engine has detected, the calibration numbers change accordingly

@kristineblethyn1909 9 месяцев назад

Hi Bryan,excellent video.Quick question,that Ancel BM700 you used,can it perform valvetronic relearn?

@publicname515 Год назад

Can you have different number injectors in different cylinders? Or do they all have to be the same injector part number?

@eslamsedky72 2 года назад

Can you please put the link for the injectors store or where to buy them (only if they are OEM) ? I got so confused searching for them. Thank you

@erice.8881 Год назад

If I replace only 2 injectors do i have to pull out and replace the seals for all of the other injectors? On a 2013 535i

@raymundopiv2527 2 года назад

Would you get a drivetrain malfunction code if you don’t code the injectors ?

@Ippothegreat Год назад

So have the scanner change the value from 280 to 279.99 is ok?? Car seems to be running fine but its always something I worry about. Then I saw your video.

@andrewcervantes3312 Год назад

Would you recommend sticking with delphis on the N55?

@apexgaming5401 Год назад

Where did you purchase the injector seal compression tool cant find it anywhere plz help

@keith06patton6 2 года назад

Where can I get the torque wrench you use in this video?

@abadmarcial2288 2 года назад

Can you put Eu6 injectors on a 2011 bmw 535i

@KingtoneeeTV Год назад

Does this Scanner work for E90 n54 engine to code injectors ?

@fthirty3 2 года назад

Great Video Brian, super thorough! On a side note, I just noticed your tattoo (Isaiah 6:8), Love it ! 👍

@KiesMotorsports 2 года назад

Thanks, I've had it for about a year or so 👍

@JB-B58 Год назад

@@KiesMotorsports can you link or send the correct part # for the seal compression tool ?

@itsalljaublin4814 Год назад

Does this work with 2011 535i x drive, it also has an n55 engine

@victordelarosa589 Год назад

Mr Brian can you tell me where you bought your injectors from

@MDVA44 2 года назад

Thanks for doing this informative video

@arathdominguez6878 6 месяцев назад

So my 2011 n55 335i convertible has bottom mount eu5 injectors but I bought the top mount eu5 injectors would I still be able to use the top mount injector since they are still eu5? I read that they switched the injectors to top mount in the newer years

@danielmoralesjr6470 Год назад

What if the injector numbers I got are all the same do I code them like that?

@codingbmwsofia2818 2 года назад

Hi, why you dont useing ISTA+ ?

@Tacoexplorer Год назад

Do you need to code the injectors in a s55 engine?

@miggeer8007 2 года назад

A question because I am 6 injectors there noted 5 injectors?

@phil_aesthetics 2 года назад

Is it possible to code injectors with VEEPEAK?

@user-so5zg6po3m 7 месяцев назад

Hi, how to change a fuel filter on bmw 435i xDrive f36 ?

@joseperal9505 2 года назад

Will this coding tool work on an n20/26 ???

@Tommy369x 5 месяцев назад

Can I install S55 injectors in my 2013 PWG N55

@christopherrutland2905 2 года назад

Great video, thank you. What is BMW part # for seal compressor, couldn't read it in video, thank you.

@JB-B58 Год назад

Did you find it ?

@MrSalt360 Месяц назад

I hve the Bosch injectors as well , which numbers are the ones that need to be used to code..

@Real_Alien 2 года назад

How can I identify the appropriate injector? I don’t know if my car should have eu5 or eu6 Mine is 320i 2013 n20 f30

@LPAmericanista 2 года назад

Were u able to confirm the U6 dont need programming?

@keith06patton6 2 года назад

Where can I get your torque wrench?

@francisgomez3278 2 года назад

hello man i have a bmw 335ix 2013 big turbo stage3 and i need to tune it you know someone?

@keith06patton6 2 года назад

When I try to input new injector valves with the BM700, it will only take cylinders 1-4, 5 remain ay “0”. What the hell do I do???

@sb8536 2 года назад

Do you really need the tool to put the injectors back in? Seems a lot easier to just screw to plate back on= push the injector in at the perfect position?

@DreamerBuilt 2 года назад

Where can I buy the Teflon ring compressor tool? I can’t find that tool anywhere

@JB-B58 Год назад

You found it ?

@phil_aesthetics 2 года назад

Is it possible that you would only really need to compress the teflon if you were installing it on the injector?

@superlomi4685 2 года назад

BMW TIS says only needed if replacing when re-using injectors. New injectors already have the ring compressed, and thus only need the decoupling element.

@cuttthroatperformance2752 2 года назад

Good thing I work at bmw now😀

@JB-B58 Год назад

Link to seal compression tool ?

@rafaelramos6944 Год назад

Hey Brian if I have a 2016 bmw n55 do I still have to code if I wanna go 950cc injectors on stock turbo and stock fueling, planning on going full E eventually but I want to upgrade to 950cc for future mods.

@gilgonzalez5902 8 месяцев назад

The factory injectors will be fine to make huge power to begin with. In terms of fuel upgrades the fuel pumps are what you want to upgrade because the injectors will easily keep up.

@hpdrives Год назад

Does any OBD2 scanner work? I'm planning to diagnose my car and I suspect it has a fuel injector fault from the black smoke and rough starts, if my doubt is true i want to know if i could use any scanner to code the EU5 injectors.

@gilgonzalez5902 8 месяцев назад

No any scanner will not code injectors this requires one of the more expensive scan tools or you can download protool on your phone and get an adapter.

@ryanreich7635 2 года назад

Licensing fees?

@davidantonevich6348 Год назад

Where do you get the values for the injectors? (I skipped around in the video did not find it)

@davidmiranda8014 9 месяцев назад

It’s on the injector itself it’s usually 3 digit unique number value on it

@christianmedina9908 2 года назад

What about b58? 🤝

@FreePaly1948 2 года назад

Thanks for the video! How do I know if my 2015 F30 N55 is installed with EU5 or EU6 injectors?

@brad659 2 года назад

EU6

@tamekatameka7197 Год назад

I have a 2014 BMW 535 xDrive in 55 engine do mine take a eu5 or eu6

@JB-B58 Год назад

@kiesmotorsport can you please give a link to the seal compression tool ?

@tylermudge9118 Год назад

Anyone know if the n20 cylinder order goes 1234 starting at the front of the engine? Or is it from the back? Can't seem to find it on google

@gilgonzalez5902 8 месяцев назад

In all of the inline engines cylinder #1 starts at the front of the vehicle and #4/6 is on the rear (firewall).

@anthonyscillia38 Год назад

Hi, what is the part number for the seal compressor? I couldn't see it clearly. Thx.

@JB-B58 Год назад

Did you get it ?

@JB-B58 Год назад

Or did you find the correct one ?AD3

@jeengyim3072 8 месяцев назад

So if it’s 215 for cylinder one and the Bosch ones are 215 does it need programming

@gilgonzalez5902 8 месяцев назад

Yes

@hotnics 22 дня назад

What is the sign of a bad injector?

@DellFreaks Год назад

Did you notice a considerable increase in noise between oem and oe injectors?

@gilgonzalez5902 8 месяцев назад

Its the same exact thing the Bosch injectors he’s installing ARE the OE injectors because they supply them for BMW and BMW simply puts their name on them to up charge.

@jaredrodriguez8309 2 года назад

What would be the reason to replace these? What would be the symptoms?

@3xcelsi0r10 2 года назад

Cylinder misfire, rough idle

@martyr8688 5 месяцев назад

How do I find the values for my injectors 1-6 respectfully? The cardboard numbers just came out of no where haha..

@BROKEASFF 2 месяца назад

Did you ever figure out how to find the values ?

@lusher00 День назад

After my mechanic swapped injectors multiple times I got the car back with a blown out injector hole. I have a kit I’m sure you’ve heard of I’m confident will fix it but I’m terrified to try. It seems so easy to screw up. Can you tell me an easy way to get the cylinder to the top & bottom of the bore?

@truthseekers6491 2 года назад

Can I code n54 injectors as well with this tool ?

@thegearhead6053 Год назад

Yes you can. It’s an Ancel bm700, pretty great BMW tool. I have a 2012 x5 n55 and a 2009 335i n54 and the tool works great for both vehicles.

@sweenmachine2 Месяц назад

Why did you do different values on the injectors? Does not make sense to me . I thought they all have one flow rate value

@Jeffc288 9 месяцев назад

Where’d you get the values for the new injectors?

@gilgonzalez5902 8 месяцев назад

On the injectors themselves, they have the numbers on them.

@chrischen5979 Год назад

Hi where can get that seal compressor tools?? Any link? Thanks.

@JB-B58 Год назад

Did you find it ?

@matthewlopez8002 11 месяцев назад

@@JB-B58did you find the tool I need it

@nikeshnabee 2 года назад

Hi Brian is it necessary to program the injectors and what happens if you don't

@bmwsincekid 2 года назад

🤔

@yamotha1217 2 года назад

I’ve had a bad mechanic replace all 6 of my injectors with no seals or programming it. (I barely knew any good mechanics, and I had just bought the car and didn’t have much knowledge). But my car ran fine for 6 months until the injectors became loose. I went to a bmw specialist and put seals and programmed it and to this day the injectors are fine and car runs great even with a stage 2 tune. Moral of the story just get it coded, there’s probably diff outcomes for diff people.

@nazarm6215 Год назад

15:17 whats the point of compressing the seal if its already shipped like its sealed?

@nazarm6215 Год назад

Ah, the problem is I bought one injector because the computer didnt say what the other one was that misfired. So the tool pulls out two at once hence the need to compress the teflon seals.

@nazarm6215 Год назад

I guess I would need to thread something on thats a bit longer to pull out the injector I am going to replace.

@JB-B58 Год назад

Did you find the Teflon seal tool ?

@maziyarzargham9659 2 года назад

👌👌👌👌

@Hassrana Год назад

Can anyone chime in... I have an f80 m3 and I'm upgrading the injector to EU5, can I still use this scanner to code the injectors???

@nickolasrosiles7007 3 месяца назад

Did it work for you? Just bought this and I’m trying it this week

@nickolasrosiles7007 3 месяца назад

Also Should work since I see the F80 model under the scanner

@801russc 2 года назад

I'd seriously recommend wearing some latex/rubber gloves of at least 0.5mm thick any/every time you work with any kind of solvents, fuels or oil's because it's caustic and does absorb into your skin. Don't believe me go get a little fuel on your hand and let it stay for 30 minutes then wash your hands really good, bet you'll still smell it even if you've washed really well multiple times.

@KevinTorres-xc2sv 11 месяцев назад

So eu6 don’t need to be programmed?

@Mere.F32 4 месяца назад

No same numbers

@endlesscatching6548 Год назад

My fuel rail does have a threaded release

@endlesscatching6548 Год назад

I’m noticing that’s another difference in the PWG vs EWG N55s. If your fuel rail is one solid piece, you have eu6 injectors

@marioescobar2418 2 года назад

What happens if we don’t code it

@NinjaTactiks 2 года назад

Just a wild guess, but I think it's because the ECU is synced to increase pressure as the injectors get dirty over age. If you don't code it, it won't know the injectors are new and shoot more fuel than you need it to. It's similar to not coding a battery because the alternator will overcharge and assume it's an older one that needs more juice to recharge.

@kaisalalialhasan1468 2 года назад

Good day. I have a question, please. I have a BMW car, and I cannot write an address on the map program. My car is a 2019 model. Thank you for the answer.