How to install ANY screen protector PERFECTLY - 10 steps ( plus 3 Pro-Tips)

Подписаться 435 тыс.

Просмотров 2,8 млн

50% 1

Hate bubbles and dust under your screen protector? Find out how to avoid/fix these annoying issues!
Check out my reviews: www.mobilereviews-eh.ca
Here's the process:
1. Setup your space. At the very least, it should be brightly lit because trying to line up something transparent on the touchscreen in a dark room is painful.
2. Take your iPhone out of the case.
3. Wash your hands! Most instruction don’t tell you to do that but keeping your fingers grease free will help with the install.
4. Follow the install instructions. Use the lint cloths and rubbing alcohol packages as prescribed.
5. Do a final clean using masking tape. Most microfibre clothes that I've come across leaves pieces of cloth on the screen. Tape helps remove all the dust.
6. Set the iPhone horizontally and look at it straight down on it.
7. Bring the screen protector as close as you can to the devices screen by holding it along the corners of the screen protector.
8. Line up the screen protector along the top and bottom.
9. Lay the screen protector at an angle so that you can easily remove it if you figure out its not aligned. For plastic screen protectors, I tend to put a slight bend in it so that its easier to line up
10. If it lines up, let the screen protector fall onto the screen and press down on the middle.
Looking for ways to remove the dust? Check out the video for tips on dust removal!
-----------------------------------------------------------------------------------------
Subscribe to stay in the loop! We release 2-3 videos a week so there's going to be something new every week. We're all about helping you get the most out of iOS so click Subscribe!
WEBSITE: www.mobilereviews-eh.ca
T-SHIRTS: mobilereviewseh.spreadshirt.com
PATREON: / mobilereviewseh
TUMBLR: / mobilereviewseh
INSTAGRAM: / mobilereviewseh
TWITTER: / mobilereviewseh
AARON: / aaron_the_ho
FACEBOOK: / mobilereviewseh
GOOGLE +: bit.ly/GplusMobileReviewsEh

Наука

Опубликовано:

8 ноя 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 668

@MobileReviewsEh Год назад

Hey guys! Here's an updated video for screen protector installation: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Brl3wXjBd_k.html

@kathyhavens4360 Год назад

@xxevilellisonxx 7 лет назад

Don't you just hate it when you thought you did a perfect job, and it's perfectly aligned to then see a small black speck of dust right in the middle.

@MobileReviewsEh 7 лет назад

Always!

@djmoderate 7 лет назад

Spike Jr Agree! I recently put mine on last week and I have ocd so this very tiny faint speck of dust that I only see when I'm screen is off is dead center in the middle. When I use my phone it's not visible but gahhhhh it's ridiculous lolllllll

@RodneyGarza 7 лет назад

Yes. I went through 3 before getting it right. I did it right a few ago on the very first try. My eyes aren't what they used to be. But this time, I used a lint roller to clean the phone and the screen before attaching. Worked like a charm

@icprydec1672 6 лет назад

ColdLike ASpriteSoda urghhhhh I’m suffering from this right now! I just tossed 2 screen protectors and finally the 3rd one I got it on PERFECTLY! no bubbles at all as usually sometimes the edge would suffer with a tiny bubble somewhere that won’t go away. Anyway right in the middle of my perfect placement a spec of dust !!!! I want to lose my mind right now! I don’t agree that these can come off once you take it off the thing is done if you are OCD and hate dust under the screen.

@g.osiris1615 6 лет назад

Thats why i never use a screen protector lol

@TommyPhoenix96 7 лет назад

One great tip my father once told me is to apply screen protectors in a bathroom. Before you start, let the hottest water pour from your sink or bathtub or whatever to make the room very steamy. Then wait a minute for the steam to settle a little and after that apply the protector on your phone. The steam will bring most of the dust down to the floor.

@MobileReviewsEh 7 лет назад

Nice!

@dani656 6 лет назад

Yeah but the steam will trigger this moisture thing in your phone and the you're going to replace it or get it fixed

@Sonofjake 6 лет назад

Daenielle lol..I was thinking same thang..

@jman102791 5 лет назад

Daenielle that’s not true I’ve used this method plenty of times

@ma060704 5 лет назад

Hot steem float up not down

@hads5279 5 лет назад

No matter what I do I have an air bubble. There’s always a corner where it just doesn’t adhere properly for some reason.

@raul5578PR 7 лет назад

Thanks man you're literally the best in reviews of iPhone accessories keep the good work!👍🏼

@TheDressagenut 3 года назад

Okay so now I know why they come in multi packs lol! The first try didn't go as well as I thought it would, but the second try was flawless. The instructions here are much better than what came with the protectors, and I'm thrilled to announce that after I dropped the second side of the protector, the air slowly travelled to the other end giving me a perfect seal! No dust under it either :) Great video- it gave me the confidence to do it myself~

@jessofl 6 лет назад

Thank you for this video! It really helped and I just applied my protector just a few moments ago and it went perfectly!! No air bubbles!!!!

@chrisjames4837 5 лет назад

makers of phones etc should be made to install a screen protector when the phone etc is made at the factory

@theskeletonboi 5 лет назад

That would be disgusting, screen-protectors ruin the beautiful glass screen.

@misterdaz1018 5 лет назад

The Xperia Z1 I had some years back did have one, I got a deep scratch on it so I removed it... The SONY branding came off with it! I was not happy.

@zxzy 5 лет назад

skeletonboi so does a one inch drop

@discraft4038 5 лет назад

@@bortanradu The S10 doesnt come with a screen protector mate, that's a film that comes with it to prevent small scratches and dirt, etc while in the box.

@discraft4038 5 лет назад

@@bortanradu mate I bought the S10 it's a film not a screen protector idk what you got but it took me 3 seconds to take off

@robinbullock2801 7 лет назад

To keep finger residue away from the screen protector installation, I wear CSI-type tight blue gloves.

@TheLegend-kf8cw 3 года назад

I had great success by attaching the long side of the screen protector to the phone with transparent tape like a hinge. Make sure that it is taped exactly in the right position as you want your screen protector to be. If you want to ensure proper positioning, attach another piece of tape to the short side to secure the screen protector before applying tape to the long side. Use a can of compressed air to blow away any dust before you peel off the plastic layer and lay the screen protector onto the phone like a hinge. The compressed air really helps remove any loose particles that would cause permanent bubbles. For more cleanliness, wear a face mask to prevent your own debris from falling onto the screen.

@rckdude12345 3 года назад

Awesome video. Went from removing factory plastic then straight to phone. No dust and the bubbles I had leftover went away after a couple hours. Even had to readjust. A+

@crrassh69 6 лет назад

Awesome tutorial this is the first time my screen protector has been perfect. The wash your hands and tape idea we’re so simple and it helped make the install perfect. Thanks again.

@imllendream 5 лет назад

The NO I suggest you guys should follow is that do not turn the glued part of the glass upside when you wish to remove dust particles. Reason is that you will attract more dusts from all corners due to other fact that aside from the glue, that part of the glass has strong magnetic field of attraction. So it's best to have it positioned upside down while u operate the tape with your fingers to it from underneath. Hope this helps.

@janisharris325 7 лет назад

Packing tape idea was brilliant and all I needed to know to save more hours of frustration to eliminate those tiny bubbles.

@sheilal5038 8 лет назад

I love your Chanel/videos. I really appreciate the time you put into reviewing products and giving a full honest review about them. It really helps me when deciding what to get. I'm one of those that likes to try all sorts, and have multiple back ups... And your vids really help me with that. Thank you again.

@jlarryd 3 года назад

When I got my iPhone 12 I had my screen protector ready, I put it on immediately after I pulled off the packaging cover. It worked perfectly

@connoramrhein9231 8 лет назад

Thanks! I just put a tech armor ballistic glass one one and it worked great. They actually included "dust removal tape"

@lexmovius4574 6 лет назад

Great job Aaron. Thank you for the great demonstrations.

@SamuelPurnama 8 лет назад

Hi Aaron, have you ever tried to lift Spigen Tempered Glass Full Cover off and put it back? Will it stick back to the iPhone surface normally? I got some dusts trapped under the tempered glass and I planned to pull it off, clean them up and put it back.

@1preciouspamm 6 лет назад

Perfect CLEAR instructions! Just installed glass screen protector on my iPhone 7 plus while viewing your tutorial! First time ever getting it PERFECTLY installed with ZERO issues! Thanks, for the BONUS tips as I think those were the ones that helped me the most!

@malikau917 2 года назад

Same here!

@Antimatter. 8 лет назад

The best thing to use for dust removal is a lint roller, a clean sheet and one swipe zero lint , I also use the lint roller on a used glass screen protector but first wipe the bottom of the screen protector with alcohol swap works perfect every time , I've used 1 protector on three different phones and worked perfect !

@MobileReviewsEh 8 лет назад

+Bigmangadget thx for the tips!

@SYSTEM__32 8 лет назад

Pro-Tip #4 =D

@marcduchamp5512 6 лет назад

Don’t use lint roller it will leave a line of sticky substance on the screen if not careful

@stepheneu6764 5 лет назад

I have had a lot of success in keeping dust off my phones during screen protector installation by turning off the AC, fans, air filters, any form of device that moves air. By all means, make sure to clean the screens well, blow with a compressed air duster can and wash your hands. Most glass screen protectors are much better than plastic ones, but some glass screen protectors are poorly made where the resulting spots on the screens are actually not dust, but particles from the manufacturing process. These are rare, but you will know when all the installs from a particular pack result in random miniature spots quite different from dust. When you change to a different pack, the spots disappear! Appreciate your many tips.

@melvinlai605 6 лет назад

hi i bought a Zippo Metal wallet with engraved monogram name and its very nice but i am worried about scratches. Can I use a plastic screen protector to paste on the metal surface of the wallet? Will it adhere as the surface is metal and not clear glass? And will the adhesive damage the engraving on the wallet? Tks heaps

@arielwilliams9987 3 года назад

This helped me successfully install a screen protector on my phone and I appreciated all the help! Technically, I have a protector replacement policy in my phone plan, but 1) covid has effectively closed almost all of my local phone places (and if they're not closed, then they're closed before and after I go into work) and 2) because my phone isn't the latest model any more, they stopped carrying my protectors in stock approximately 6 months after I got my phone. I've been so afraid of screwing up a new protector's installation and being left without a protector in a high impact work environment that I've been putting off the replacement process for the last 8-9 months, with a increasingly cracked and dangerous protector to show for it.

@franknobody5965 5 лет назад

Do you have anything good tip for a protective glas for the Huawei P20LITE?

@nadergt1 6 лет назад

Thanks for all your videos. 1 Question : After you wash the SP how do you dry it before putting it back on ?

@chrissully 7 лет назад

Hi what protects come with the plastic surrounding guide. I would find that helpful.

@QuizzingHobbit 5 лет назад

It was my first time installing an iPad screen protector, which made me nervous, but your instructions made the process go smoothly. (I didn't have any packing tape around, but masking tape seemed to work for me.) Thumbs up for great advice from a fellow Canadian!

@AWilson3342 6 лет назад

Thank you for the tips Aaron! Because of your video, I was able to install a screen protector on my phone perfectly! That’s the first time I’ve ever been able to do that!

@akirashin97 8 лет назад

is there any glass screen protector you think will best fit the lifeproof fre. i know the company itself said it doesnt. but is there a way to protect the screen in case of a drop when im like washing the casing itself? which do you recommend?

@chrisbp5305 2 года назад

Great tips especially about washing your hands and using some packing tape to remove dust. Thanks for the excellent and very clear instructions !!

@Guapogiboy 7 лет назад

I have a good tip. 1. Line up glass screen protector over your screen then use masking tape on one side to create a hinge once you are happy. 2. Clean glass to roughly with microfiber cloth 3. Remove plastic cover over adhesive side of screen protector and apply to your phone while using the hinge tape as a guide You may need to do a few practice runs to tighten and Make adjustments. If not happy Then when all is finalized. Remove back cover apply and your done. I learned this trick from the Anker Glass protector application

@MikeyBe 3 года назад

fantastic tutorial, had a quick look and installed one flawlessly immediately after. All I really needed was 2.50 min to 3.20 min Just the technic I needed. I lined it up and held it as close as possible, then dropped one end first as you described. Then the other and ran my finger gently up the middle of the screen. Too Easy no rubbing no bubbles OMG why didn't I watch this years ago.

@AliShaikh_744 2 года назад

Whaaaaaat. Some people take 2.60 min to 3.30 min. You might be faster than the average person at appling screen protectors. Well done.

@ArturoG21 8 лет назад

Dude your videos are so good and it's such a shame you don't get more views. Keep up the great work and one day it'll happen.

@TheEcorristine 5 лет назад

Hi there, where did you get your soap dispenser, was watching your vid because I just bought a screen protector for my new Samsung A70 but when I saw your soap dispenser I thought you might divulge as I'm also looking for one of those too, have been through too many rubbish ones to mention...thanks

@phantom5126 4 года назад

I got a new iPhone a few days ago and I took it off and on like 20 times trying to get every hair out

@eFKa 6 лет назад

i got marks on the borders of the screen protector... how do I go around that? it looks as if it hasnt been fully 'glued' to the screen

@michaelh6611 5 лет назад

In my experience there’s no way to fix that. You either have to accept that’s it’s going to be an eyesore or get a new screen protector

@robinharperful 4 года назад

Can I/Is it advisable to remove the plastic protector fitted on the brand new phone before installing the glass one or can I layer the glass one over the plastic factory fitted one?

@jtate333 13 дней назад

Hi if I have had a tempered glass screen protector on for say six months could I remove it and put a new one on again after so long? Thanks

@pearlesme8561 8 лет назад

Do you have a review for best bumper cases? Thanks!

@perrypelican9476 6 лет назад

Staples has a special screen protecting stuff(liquid) they apply to the screen with some kind of patented process. After it dries, it’s totally invisible and can not be removed unless you scrape it off. It’s great because there are never any bubbles. It costs around $30 Canadian for an iPad and lasts at least a year. When it needs replacement, staples does it, which is fine with me because of how perfect it is. I highly recommend it. I have had it for at least 6 months on my iPad Pro 12.9 and it’s still perfect, not even the slightest scratch and I use my iPad every day for hour at a time and I am not delicate. Fantastic product. It takes at least an hour or so to apply and dry. I hope they continue this thing. I was afraid to have it done, but I am so glad the guy sold me on it. There are no visible edges. It's totally undetectable.

@yyjmsho Год назад

Following your tips I did it well for the first time ever changing my screen protector since it was my dad who always did it for me. Thank you!

@lms5608 3 года назад

The tape trick definetely saved my screen from having tons of bubbles, thanks!

@brokenlegz 8 лет назад

I've only ever been able to get them perfectly lined up using a bit of tape down one side. Line it up. Tape one side. Flip it over. Clean screen. Peel backing off. Flip it back over onto screen. If that makes sense I hope it does

@neonheadmutt 6 лет назад

That actually sounds useful thank you

@racqueteer5606 5 лет назад

Exactly the best way, why didn't the guy doing the vlog mention the tape method if he as an idea what he's talking about?

@tomtam6666 4 года назад

The main challenge is lining it up with the phone. This video didn't help at all. Thank you for your technique. You should make a video.

@ConradMurkitt 4 года назад

I always do it this way and I have done quite a few for friends. The hardest part I find is aligning but once that is done the tape makes it so much easier.

@milkeyway7105 3 года назад

I don't understand.. can anyone explain it thoroughly please? This is my first time applying one

@DevidPavlicek 4 года назад

I need a Tempered Glass Screen Protector for my Huawei P30, which one is good ? I have put one but I am not satisfied as the edges are not covered.

@zackrappleye8553 8 лет назад

Please review the newisdom tri layer case. I want to see if it is good for drops.

@sup312m8n02 5 лет назад

Question? Where did you get your iwatch case.? What kinda case are you using on your iwatch

@tonycoke8623 8 лет назад

Hey Aaron can you get your hands on a R-just waterproof case it's more of a budget case but I'd like to here your opinion on it

@JeffCChung 7 лет назад

Is the Blackweb Screen protector can you do a review plez

@regissmith5503 Год назад

Can someone please guide me. Does using a masking tape or sticker (to remove lint) that comes with the screen protector kit, destroy the oleophobic coating on the iPhone pro? And does removing and reapplying too many screen protectors damage the oleophobic coating as well? Please help

@iceplanetchris2052 8 лет назад

The screen protector from Amazon that works best with the Apple leather case?

@sergrojGrayFace 7 лет назад

My experience of trying to install a screen protector suggests that if you don't get it right in the first try, you're screwed. In the air there's way too much dust that will stick to screen protector. At least that's what ruined screen protector that came bundled with my phone (Lenovo). I guess bathroom would be the best place for the procedure, because the air isn't dry there.

@debbiescott9507 4 года назад

I think I can apply a glass screen protector successfully, paper thin, brand is iHome....I ordered a Defender case for my 11xr iPhone, ( love that sliding back to keep my drivers license in compartment) I hope my case will work fine with my screen protector. Any idea??

@Brsrafal 2 года назад

what about gorilla glass 5 does it still need screen protecor? i assume i got a cheap plastic one with my 9 dollar amazon case is it evenw worth it

@tommyharris5817 2 года назад

When I received my iPhone 13 Pro, I tried to remove the air bubbles caused by a glass screen protector. I used my finger to swipe hard against the glass with around 10 pounds of pressure. Do you think I have compromised the screen integrity?

@byramjis 6 лет назад

Have you put a screen protector on an Honor 8 from Huawei? I can't eliminate the edge "bubble"

@christopherray6388 7 лет назад

do you ever use LCD pray to lay a screen protector down? ive heard alot of people doing that

@mrhappytroll 5 лет назад

how long after should you not take the screen protector off ? I just put mine on a few hours ago and its SLIGHTLY missaligned and I dont want to take if off and find it wont stick back on right

@rosildalima610 2 года назад

I've done it exactly how you showed us, it worked perfectly, thank you so much.

@Fendera1 6 лет назад

I bought the third screen protector for my switch, everytime I have some dust underneath the protector :/

@PetrieRobert 2 года назад

Thanks for the help. BTW, painter's tack cloth would be a better choice to remove dust

@xlunaXxX 6 лет назад

Hello, I notice that even your tempered glass has a “halo effect”. This is when the screen protector does not fully stick to the edges. How can that be solved?

@ikhwan8861 8 лет назад

I never seen screen protector tool before, i think i need it, where i can get it, thanks.

@WillNewcomb 3 года назад

Brilliant! Thank you. Just installed the most accurately placed screen protector yet, but still not perfect, haha. I’ve saved your video for future reference which I know I’ll need. Blessings.

@Phildo8 4 года назад

I manage a Verizon Wireless Indirect Dealer store or “Authorized Retailer” as we’re know in the public. I was just searching for a very detailed but also easy to understand tutorial that I could save & use as a reference for the older crowd that we get in here that starts a new line or upgrades their phone they always buy a pack of screen protectors but most always ask “can I come back in to have you put a new one on for me when this 1 gets cracked, scratched, or all worn out?” Which I always say “absolutely no problem but please don’t make a special trip of it and use the gas and time just for a screen protector but if you’re out running errands please swing by anytime!” So I figured I’d look for a tutorial that again is very simple but very detailed so that basically anyone could do it & when I found yours I immediately knew this was exactly what I needed! I seen this video was 4yrs old but hoped that you were still doing tech videos & after seeing you are I immediately subscribed! Thanks for the amazingly simple detailed tutorials!!!

@taekin9781 2 года назад

thanks for this video. It worked great. it's so tricky lifting it back up again if there's dust or something underneath. just your nails lifting it up pushes dust under again very frustrating there should be a tab with strong glue that could help lift the protector up from the manufacturer.

@jordan_.zx10r 6 лет назад

On my iPhone 8 the protector is like 1mm to the right so a litttllee part of the screen is not covered, it doesn’t bother me but idk if it’s bad for it somehow

@NativeNorCal650 3 года назад

Where did you get that tool to line up your screen protector?

@connormcdonaldjones8473 5 лет назад

This was really good and helpful. Thank You!

@mariyanhristov6109 6 лет назад

This was of great help. Thank you !

@JackBlack-qn7us 5 лет назад

What do i need to do if there still a line of air left on the edges of protector screen?

@indirabulathsinghala3152 10 месяцев назад

Thank you for your instructions

@edutwork4766 2 года назад

Thank you so much, it worked perfectly!

@DiaborMagics 7 лет назад

how do i take off a hori ps vita protector? It seems like it wont be so easy as you say it is for that one :S

@RoseTheOne64 7 лет назад

thank you so much for this video. my only problem with applying screen protectors was because of dust, i had to use a big piece of tape and roll back and forth on the screen protector but it worked. thank you!!

@_TheUnMovedMover 7 лет назад

RoseTheOne64 j

@lauraconway7093 2 года назад

Why does my screen protector have a mirror face up after I applied to my iPhone 6 everything works perfectly but looking at my phone I’m looking into a mirror is this ok???

@kopper7509 3 года назад

My issue is always alignment issues. Most screen protectors only barely cover the screen that’s lit. When you miss the edge of the screen, it’s very apparent and annoying. I wish companies included some better way to align it. I’ve also had screen protectors aligned in store and it’s hit and miss on the skill of the employee doing it.

@evalew4795 6 лет назад

Great videos! Keep up the good work. Better than reading reams of Amazon reviews.

@jeffjeffjeff2 Год назад

Helpful video, thanks for taking the time to shoot, edit and upload 👍

@sometimesiwander7146 Год назад

Thx for the video. I’m putting one on my new iPad, but it’s 3 yrs past time to put one on my iPhone. Lol. Extremely helpful. Thx!

@gm_stian 4 года назад

If the dust is along the edges you could actually lift the protector just enough in the area where the dust is, and gently slide the adhesive under and remove the dust without having to remove the whole protector from the screen. Make sure the adhesive is as clean as possible on the non adhesive side.

@vindheimar2631 2 года назад

Thanks for posting! This will help me

@cjunderground1 8 лет назад

are the tempered glass protectors from zagg good for the iPhone 6s plus ?

@MobileReviewsEh 8 лет назад

+cjunderground1 Yep.

@ID.002 4 года назад

Got my like! Video helped me install a set of screen protectors for my 2ds XL. Thanks!

@Ps64Mario 6 лет назад

Thanks so much, I got it perfectly first try!

@lateraldeano 8 лет назад

how many times did you say screen protector :)

@singingfan 7 лет назад

lateraldeano drinking game! Drunk halfway through video. Haha

@graysinclair6572 6 лет назад

lateraldeano Still laughing!

@sircrow8058 5 лет назад

lmao

@Wakajce 5 лет назад

screen prrdekdrr

@michaelmoravetz5830 5 лет назад

I scrolled down looking for this comment, Thank you. Im never going to be able to hear that word again

@woahwee 8 лет назад

Can you review the otterbox my symmetry?

@AnthonyBrucculeri 8 лет назад

Which watch case are you using in this video?

@honda2363 6 лет назад

I recommend the "hinge" method. You line up the screen protector then apply 2 pieces of tape to it around to the back of the phone so the screen protector moves like a book cover. After cleaning your screen (and only then) you peel off the back of the protector and drop it in place immediately. Don't lay the screen protector upside down on the counter for any length of time with the backing peeled off, because dust is constantly falling on everything. Some people recommend installing in the bathroom after a shower so the moisture takes care of the dust, but that's overkill. Lol I never end up with anything but a perfectly installed screen protector.

@Billstain97 6 лет назад

My tempered glass screen protector never sits down around the edges of my phone properly, any tips?

@iceplanetchris2052 8 лет назад

What screen protector did you use at the begging of the video?

@jessechiappa7750 6 лет назад

Would it be a smart idea to install a glass screen protector or any screen protector for that matter, straight after opening a new phone??

@Chibubu_ Год назад

Just installed mine and your video really helped, didn't even have a bubble.

@beverlypalazzo8633 5 лет назад

Can I cut the screen protector to size needed?

@ujodikmur_9929 3 года назад

I need help. I bought a MiBand 3 Screen Protector. And the glass isnt sticky. How to make it sticky again

@christinedemerchant8388 Год назад

Worked perfectly, thanks

@marcr5595 8 лет назад

Will a apple silicone case fit the iphone with a edge to edge screen protector???

@MobileReviewsEh 8 лет назад

I would guess yes

@amypereira6174 4 года назад

What can I do if a fingerprint smudge got underneath the tempered glass? I did a horrible job applying the screen protector. Do I just need to replace it with a new one?

@clowncarqingdao 5 лет назад

Loved your video. Quick tip - after you use the alcohol wipe, don't use a lint free cloth. Put the cover on immediately. You can see the contact between the screen and cover and dust is also gone. The act of over cleaning with the cloth can charge the phone screen glass attracting dust by electrostatics.

@Hundert1 2 года назад

I agree 👍

@MyAmazingUsername 2 года назад

No. Dude, Marky Mark, wtf? If you install a screen protector (glue) onto a wet alcohol screen, you will dissolve the glue and risk that the protector gets clouding, comes loose, bubbles, etc. Always wipe off the alcohol ffs. Alcohol eats away and dissolves glue!

@Hundert1 2 года назад

@@MyAmazingUsername The alcohol dries almost immediately. I'm sure he means to wait the few moments until the alcohol evaporated.

@pmallgood 8 лет назад

I like to use masking tape on one side, as a hinge, so it remains perfectly centered before i pull off the film on the back and let the "hinge" guide the application.