How to Install AVS In-Channel Vent Visors on a 2019 GMC/Chevy Truck 

Now this guy is very detailed on the installation he explains a word for word what is you do when installing and the window seal I really like that

This video made the job supper easy. The instructions were ok, but the video brought it all together.A good job and thanks.Oh, and the box they came in were just the right thickness to make a few square pieces for putting a little pressure on the tape.

Really good tips for installation...particularly the cardboard "shoehorn" trick!

Great Video! Was intimidated prior but appreciate your confidence building video! Live Free!

Very nice, ty for making it look easier than I thought it might be...

I agree with every single thing this guy does except keeping your windows closed with the cardboard in them for 72 hours. That’s 48 hours longer then you need. I’ve been installing these for 10 years now and I’ve never heard of anyone leaving them in that long. 24 hours is more then enough time for the adhesive to bind. Besides that excellent video!

Excellent Video, Thank you I've installed my (AVS 194805) on my 2020 GMC Sierra SLT Crew Cab. The searching I've done, nobody was as precise as your video. Right down to the plastic clip for the rear window. The manufactor's instructions were vague about this clip. When I did my dry fit, I also did as you putting one end into channel then the other then sliding to top without the need to force or bend the visor as i"ve seen so many others do. Unfortunately I received a bad batch. I contacted AVS and after sending pics of the warped vent shades, They are sending me replacements. I got push back for not being able to roll windows up/down for the 72 hours from the wife but I guess these things happen. Thanks again

Excellent video! I'm installing these on my 2020 Honda accord today!

Excellent demonstration 👏🏼👏🏼👏🏼

This was such an awesome video. Thank you

Totally detail oriented. Thanks.

Nice Clear instructions. Well done good sir!

Again, great tip using cardboard. Thanks for the video, it turned out great on my 2021 Jeep Grand Cherokee.

great tips 👍🏻 gracias guero

Mine come in for my 23 colorado. Cant wait to install then

Thank you, I installed these on my 2020 accord and 3 came off. I'm thinking I didn't abrade well enough and am getting ready to try this again! What should I use to abrade? 3m red scotchbrite?

I had to use my dremel to shave some of the plastic off on the inside edge of my back window. Also had to use super glue on the inside edges because the double sided tape would not stick.

Thank you great video!!

this video was awesome helped tremendously

Great tips!

Thank you! Great jobs.

TY....very helpful

Super helpful! Thanks!

Do these do any better job of cutting down wind noise than the type you attach over the top of the window (attached to the door body above the window)? I don't care about rain, just wind noise. My 02 silverado is extremely annoying at 65mph.

this it the only video. Awesome instruction

thank you for the tips!!!!!!

Perfect video

Thank you!

Great vid

I had visors on a previous vehicle. I could the wind noise when driving . Is this because maybe they weren’t installed properly? Thinking about get some on my new vehicle but I don’t want to hear the wind noise.

Very helpful. Thanks 👍🏻🇺🇸👍🏻

Does this in channel visor mess up the channel or window

What is the rubber that gides the window called

I tried to install these on my 2019 Silverado with the auto-up drivers window. The window won't close because it hits the visor. Any suggestions before I send them back?

My front window driver side catches the edge of the visor and most times will not let the window roll all the way up unless I guide it using a piece of cart board. How do i fix this problem? My back visor bows Inward to the point where it touches the window. How do I fix that problem also? TAI

I found a whole set in the junkyard yesterday, but had no knowledge about the plastic clips for the rear. Do you know of anything I can use in place of those? Thanks in advance..

Do you have a video for the new body style rams? 2022 ram 1500, crew cab, in-channel?

Anyone know what sand paper to get ? I lost the little piece it came with

My front windows didn't come with the adhesive tape

How do you if it goes in the different spots?

My front windows keep coming down. Also I’m having to hold the visors so the window can go up, I have a 2023 F 150. Also there are no insert pins in my package. I might have to return these.

Perfect 👏🏻👏🏻👏🏻👏🏻

i have a 05 gmc canyon extended cab,the rear windows do not go down which kit will work for this model

How I do Toyota Highlander 2019 is same process

Please tell me that all visors have that avs logo. It’s so clean

I can't get a match to fit my 99 Crown Victoria I'm desperately trying to find in Channel deflectors. It should be easier than this

Im having difficulty near the mirror area. The space isnt big enough

How can i remove the the visor?

For some reason my rear visors bent in toward the window

I was wondering when Taking the visors off will it leave adhesive stuck on the inside of the channels? If so would using a heat gun make it easier to take those off?

Is the outdoor temperature very important for longevity? It's about 45 to 60 here.

At least yours came with the adhesive tape on the section that is above the mirror. Mine came with nothing there so it just flaps 😒

Got a video about how to remove these? Thanks!

💪🏼💪🏼👍🏼

So to properly install these I have to scrap the inside of the channel?

What could be causing my window to bounce back when I use the auto-up button?

do you ever have a problem with them not clearing the window and window doesnt want to roll all the way up. ps I just watched this and left cardboard up. let's see after a few days if the window clears the vent visor. fingers crossed.

DONE! TOO EASY THABKS TO THIS VIDEO! To the guys that couldn't install their - FOLLOW INSTRUCTIONS DIPSTICK!

How do I take them off

I didn't get the clips for the rear windows 😕

I’m confused on why somebody would wanna damag weatherstripping by signing it down

I followed the same steps when installing a set onto my maxima. Three days later I lowered my window and upon raising it again, it caught the vent visor and the visor literally exploded. 🤬🤬🤬

Now a video how to remove

Who wants tacos ?

Great job, but 72 hours!?

Just put them on my F150. Used the cardboard trick, left them for over 72 hrs and the window catches on all four on the way up…🤬

Oops I didn't use that abrasive pad

72 hours is a long time for a smoker lol