AVS Ventvisor Installation 

Thank you for this. Nice professional tip on cutting just the ends of the tape cover & placing BOTH the units on without committing the work which gives you a chance to make sure the placement is properly aligned to give it the factory look. --guy takes personal pride in the work too. I like that.

Of all the instructional videos I've watched on this subject this is by far the best. Thank you very much

Brilliant method, usually i just go in and eyeball it. This is much more surgical and precise. Thanks for sharing

Good guidance for beginners like me. Thanks

Thank you for this video, really informative and easy to follow. 👍🏼 I had my car in for repairs yesterday and asked if they would be able to install these when I buy them. They insisted I could do it myself. I figured I probably could but I might get it all wonky. Your video really helps to see how workable it is! Thanks again!

I always like to watch the video beforehand just in case. This video and the instructor were very informative. Very well done! Thank you!

Quick and to the point. Well done! Thank you.

I love them I just applied them on my suburban the people at advance made it like it was something harder than what it actually is I did mine within 5 minutes thank you for your guidance to get it started

Great video with lots of solid tips! Doing my install tomorrow and so glad I found this vid. Great job!

Thanks for taking the time to demo the install! This was very helpful!!

You instructions were simple and clearly... I feel like PRO now... Greetings!!

So happy I found this video and watched prior to the installation. The rain guards I purchased do not fit correctly, so I am returning them. Had I just unboxed and installed, prior to assigning with the tape still on, the return process would have been a much stickier mess!

Straight to the point. Solid tutorial!

When he pulled the backing off I was like very smart way of doing it

Excellent advice on getting this installed. Thanks for posting.

Excellent video ! Thank you Sir for your time recording this and sharing .

thanks.....I needed a refresher to install my Vents.

Just got my wife a new ride. This was helpful. I’ll be putting hers on shortly.

Thanks! Saved me a headache. Never would have thought to NOT remove the entire tape backing at once.

Just taking a moment, thanking you for the instructions, very simple and made easier. Good day

Excellent job sir! Good tip only exposing the adhesive tape on the ends.

Thank you for making this video, it is always helpful to get advice from the more experienced, besides if i mess up my wife’s car, she will never forgive me for not watching a CARiD instructional video first… :)

Awesome. Exactly the information I needed.

What a great tutorial on how to do this. I’m very appreciative.

I almost paid to have the dealership do this. Thanks for the video. Saved me $350.

I just installed mine! Thank you so much for this wonderful video!

This is a very informative and professional video.

I have wanted these for ages and always thought it was hard to put on. Never investigated. LOL TY I will be getting a set soon.

Just bought some for my 1500 and this video helped me 100% i have no experience with things like this and i would have botched this

Glad I checked out you video first. It was a big help. Thank you.

Seeing this video, am now gonna purchase my vent shades (rain guards) thank you so much.

My vent visors have come lose on one end, I have 3M dollars side tape. But no alcohol...what else can I clean with? That won't be oily, as need to RE STICK end. Help?

Thanks. This helped me a lot. And I used some good pointers for a video I just shoot. Coming soon.

wow Your instructions is the best and easy to follow .I'll do this to my JeepW. THANKS YOU

Thank you. Just installed on my Honda. They look great. Thanks for your tips.

Great video and a great website to buy parts from. Thanks Carid 🤘

Very helpful man! Thank you.i always wanted this for years.thanks again.

Thanks for the video. All this time I was trying to insert the window deflector inside the window sil but it would never fit inside. I came to the realization by watching this video that the ones I bought are meant to be put on the car outside.

Watched this video. Read instructions. Perfectomundo! Thanks for putting this video together.

Thanks this was solid advice, put em on my S10 today👍

Thanks! Your instructions were easy to follow.

Yay you made it easy to get it right do appreciate it doing mine Saturday 🤗 thank you 😊

Tips from the pros are always great! Thank you for posting this :-)

Helpful, thanks. Mine had a little part that pushed in behind part of the window seal by the mirror that can be missed which will make for a poor fit.

Just got mine! Thanks for this!

Thank you. Made installation so much easier.

Can you do one for the installs on in-channel AVS deflectors? Package instructions say to "buff" the inside channel w/included 3m Scotchbrite and to leave windows up for 72 hours to ensure fit and permanence. That product is definitely different than what was shown here. Cool video. Love the candor and tips. Very professional, too. Thank you!

Very clear instruction! Thanks so much

thanks did mines as quick as u with your video😎💪🏽💪🏽

Quick to the damn point no bullshit thanks for this informative video!

Very good demonstration on the install. Now I just have to get the old sticky tape off to put new ones on my suburban.

Thank you just got em for my truck

Awesome instruction video!! Thank you!!

Excellent tips, thank you.

Great tips ! Well done sir 👏

Thank you sir, very detailed instructions👍👍

Hello Carid, how far from edge of car door do ventvisors apply? Thank you !

Thank you so much big brother.

Very impressive Like the clean skilled install.

Great tip about the tape🙂

His tape method is brilliant

Great video. Thank you so much

Very nicely done ✅ thank you!

very good video quick to the points

Thank you for this instructional video, very easy to follow but I do miss the transcript that you included with your removal video.

You're the best! Thank you

Your video was super easy to understand for the external vent visors. Thank you! Unfortunately, I purchased the AVS in dwelling vent-visors and I’ve done everything you did, plus I followed the instructions to the letter, on the package! I even purchased over priced additional doubled sided 3M attachment tape! They will not stay in place! Can you suggest anything else I can try? The auto part store will not refund my purchase nor do they install them. Years ago they did! Otherwise this is $65 I’ve thrown in the trash!

Great video. Thanks

Good video and explanation

Thank you very much. Well-done.

Excellent tutorial! I'll be using the method when I install today. Thanks!

Can I install this when its 42 degrees outside or should I wait until it warms up?

are they support to fix = and shoping for 2016 got any in stock thank you

Would it be ok to install these in a hurricane or blizzard in a walmart parking lot at 12am

Well what if u put them on before watching this video and u realize one is crooked after you’re done? How would a feller that did something like that correctly adjust it? Pull completely off get new tape ? Get a new visor? Live with it?

good job . inspired to do it.

Music hyped me up to do it

I bought almost the same product . according to the product i gotta use a heat gun to heat the visor after you put it on your car? Is that a good idea?

Ok does the halo supposed to be on when turning the main nite lights or when the day light ?

Use ultra fine permant marker, it blends with visor and wipes off with alcohol.

Nice guide the music keep me going

not trying to be silly but how secure are these stuck on ones? its not going to blow away while driving or the glue become loose on a super hot summer day?

Great tips! Love the tape tip, going to use that when I replace my old visors. Is there a secret for getting the old cracked ones off? Can I use "Goop-off" or similar first then alcohol? or is there another way to make the surface clean again?

Solid work! 😎

Nice video . thank you

Well explained.. thanks

Thanks nice and clear

Great video

Thanks so much!

Thank you Sir.

Thanks very helpful

Nice . First and best video ever seen. Simple and easy .hopefully it’ll be simple and easy when I try it on my car. And what is the main and only purpose of these guards ?

Thank you!

What is the ideal temperature to install this please .

I thought these slid up inside the rubber seal along the top of the window....soooo.....can someone tell me if im correct or not?

I've seen three of these videos so far, and the strip just magically peels off of the double-sided tape. It was not like that for me. Maybe spend more time on that part. Otherwise, well done.

My Ford fusion does that go on the rubber seal

Thanks. Good tips.

V. Hickle You must be MERICAN 🇺🇲🇨🇦

does it have to be warm out to install? If there is a recommended temp it should be outside, what is it?