How To Install Coil Spring Spacers 

Learned a whole lot from this video and this dudes persistence yet patience!! hahaha

My rear struts are not coil over so I just unbolted the top mount and pulled down the A arm and used a pry bar as well to open up the spring to install the spacers. I didn't bother with zip ties but they seem like they won't go anywhere with the strut remounted and the weight of the car on the spring.

Thanx Man. Just bought these for my 05 grand marquis ill install em tmro. I may need two more tho after watching yourvideo. 4 on each spring 2 long way and 2 the short way cause ive got HEAVY speakers and the cars so long and heavy it still may not sit right w just 2 on each spring.

I had a wreck and it pushed the rear wall of the trunk forward a little so I'm gonna do this I hammered it back some but it's still just barely rubbing can't hear it but can feel the heat

it might work better if you find a way to lower the top mounts of the shock , like taking a bit out of the top cup they mount intoo or putting a filler piece inside the cup , that way the spring whont be loaded in a weird way

very helpful. Thanks.

Being a strut, those will only add enough to max out the shock. Get a spacer for the top of the strut and you'll see some real gains

good info.....thank you

awesome. thanks for sharing. 🎯

Thanks for this. Learning a lot from your video.

895.00 and I have a question if you have time tomorrow for a home 🏡 🙂 and a little better

I wonder if this would be a cheap substitute for a stiffer suspension for cornering at higher speeds.

Simple solution. Great explanation. Dude, replace those brake rotors...

Id suggest putting a mic muffle on when you record.. also the spacers work better at the top of the coil. Great video though, thanks!

Can i put them 2 sets of them on the same spring so it lift higher?

Wait a minute did you say LS swapped ok time to sub 😂

I have larger springs and they don't move. Easy peasy on smaller springs.

So here I found the car advise I was looking for...

How to remove

Wish I had a Festival.

How's it been since you added the spacers??

Is it possible to get 2 inches higher?

Where can I get them

Can you make the spacer yourself???

I feel like adjustable spacers would of made this easier

Do adding these make the car stiffer?

Harbor freight has a tool that you can use so you don’t have to break it down

If you're removing it, just change the springs...

You have it on short setting do taller

All due respect cuz I been-there-done-that....that thing is a time and money-sucking yellow deathtrap. No time to waste in 2021, flip vehicles and make $$$.

I would have given you a thumbs up but the counter was at 333 likes...it's a sign!

I struggle to think how someone could be so inept they kill themselves compressing a normal car spring with typical tools. Old wives tale for car guys.

Top and bottom coil is supposed to be the proper way.

Sorry to tell you but, it doesn’t have two sizes

Jack it up higher

$11 about you time ?

You didnt SHOW how you inserted them. Your arm was in the way

1st mistake, buying a Ford Festiva

Oh my god. I have not seen (or used) these ghetto spring spacers since i was a kid in the 80’s. DO NOT USE THIS CRAP! Terrible idea. Terrible product.

That's a mistake alot of people make: thinking it's aift. It's not! All ur doing is stopping the compression. If u want ride height higher then get the lift spacers that the coils sit on instead.