How To Install Feit 3 Way Smart Dimmer Switch With 2 Smart Dimmers

Подписаться 91 тыс.

Просмотров 40 тыс.

50% 1

Feit Dimmer Switch: amzn.to/3dsLdLf
How To Install 3 Way Feit Dimmer With 1 Smart Switch: • How To Wire Feit 3 Way...
3 Way Switch Wiring: • How To Wire A 3 Way Sw...
How To Install Feit Smart Switch: • How To Install Feit Di...
In this video we teach you how to install a Feit 3 way smart dimmer switch with 2 wifi smart dimmer switches. The Feit wifi smart dimmers allow you remotely control your lighting from your phone. The Feit 3 way smart dimmer switches can also be connected to Alexa or Google Home for voice control of your smart lighting.
The advantage of installing the Feit dimmers switches in a 3 way configuration with 2 smart dimmers is that you can then control the dimming levels from either switch or from the app.
**Join the email list: eepurl.com/0KDob **
Our Website: www.onehoursmarthome.com/
Podcast: www.onehoursmarthome.com/podc...
Videos produced by One Hour Smart Home are provided for informational purposes only. All material provided within this website or youtube channel is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Please use use all safety precautions when performing a DIY project. One Hour Smart Home does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site or youtube channels. Viewers must be aware by doing projects on their homes they are doing it at their own risk and One Hour Smart Home cannot be held liable if they cause any damage to their homes, themselves or others. With different codes around the world and constantly changing standards, regulations and rules, it is the sole responsibility of the viewer to educate themselves on their local requirements and codes before undertaking any sort of project. Hire competent professionals when needed to perform a task which you are not or do not feel qualified for. Use at your own risk. Links included may be affiliate links which help support this channel.

Хобби

Опубликовано:

16 апр 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@bbass56 2 года назад

Thank You ! It took quite a few trips up and down the stairs but I finally got it !!! Thank You !!!

@bdmoore3096 Год назад

Very well done for a very simple uncomplicated test board. I suspect there are very few real life situations with such straightforward wiring. In an existing home, with wires in the walls, there are many more wires combined in the junction boxes. It can be very difficult to ID the travelers, the correct common, & even the load wires. Can you explain how DIY's can do so?

@qaisarabo1126 Год назад

Thank you for the video. I was wondering if you could make one with a 3 way configuration with a switch loop. I have two junctions that are switch looped and it’s a pain in the butt!

@isaactatineni Год назад

I have one switch that turns on/off the light. The other one is not. Do you know why and what is the solution to this. ?? I have done it exactly the way it’s shown in the video.

@davidfitzgerald2640 2 года назад

Awesome Video.. was wondering if you could demonstrate and explain how this would be connected in a 4 way switch situation. I have a long hallway and each of the 4 bedrooms has the ability to turn on the lights in that hallway from just outside the bedroom doors. I have one Feit Smart Dimmer installed in what I think is the first junction box in the line and the rest have regular switches ( not sure if these are 3 way or 4 way at this point). Of course, if I flip any of those off, the lights turn off which is fine. This is true except for the last switch, if I flip that one off the lights just dim etc. so I know something isn't right. The whole thing works now if I keep the other three switches up and just control the dimmer, but I'd like to make it right. I've got a couple of new Feit dimmers and some new 4 way switches ready to install but I'd really like to take this apart again only once and get it back together the correct way. House was built in 2004 so neutral wires are present. Much appreciated!

@antbithia 6 месяцев назад

Very helpful video, thanks! My existing 3-way wiring is different than this video: 1-) left-box has only 2-wire (hot line black & neutral white) AND 3-wire (travel 1 red, travel 2 black, & neutral white) , only 2 white neutrals connected. 2-) Light is in the middle (Load cable is red connected to lights cable black & neutral connected to lights neutral white) 3-) right-box has 3wire cable (traveler 1 red, traveler 2 black, and red cable) Can I still use my current wiring to do 2 dimmers 3-way?

@TrendingGamerTGC 6 месяцев назад

Both of my boxes have load wires. what do I do with the extra load wire?

@AdamLockwoodMusic 2 года назад

Thanks for the info! Have you had any issues with one dimmer affecting the lights on a different dimmer (same model). That’s what’s going on for me. I’ve got two sets of lights in our basement with, both on different circuits, and a 3-way setup in the hallway. When you adjust the dimmer on one, it will actually affect the lights on another; sometimes resulting in a very unpleasant flicker. Any thoughts?

@Lowaza 3 года назад

Great video! Very thorough and helpful. Can you use any lightbulb with these smart dimmer switches? If not which types of bulbs can you use?

@OnlyKelp 3 года назад

If you use led’s make sure they’re dimmable led’s. If not, they’ll flicker when you try to dim them

@lmfinato 2 года назад

Does it matter which of the 2 smart switches carry the load?

@anon0054 2 года назад

Could you comment if this wiring diagram would also work with 2 3way dimmers form TreatLife? They appear to be designed the same way. Thanks.

@Efrain-ue1mv 3 месяца назад

Will it work on a 4 way system

@basilcunningham1874 2 года назад

Can you do a video for a 4 ways connection with smart dimmer light switch or a 4 way using a motion sensor

@nivenive4589 Год назад

Do you have any instructions the traveler wire going through 2 light bulbs in the middle and second switch at the end.. The instructions in this video didn't worked for me.. since the traveler wires going to the bulb from the first switch..

@moto8519 3 месяца назад

Can you wire this with the light powered first?

@armandogf6322 Год назад

Hi, do you know if a 4 way switch can be plugged between those?

@bbass56 2 года назад

The first set of switches were like you said, the load wire was not connected to any switch, it was in the box in the line side i sepearated it and that worked out fine, but this other set I'm trying to connect does not seem to have a seperate load wire, it seems to be connected to the switch on the load side and seems to be a traveler wire, its black. any advice ?

@martyparshall4368 2 года назад

Same issue. My wire to the lights is in a switch opposite my main power line is in, so load and power from breaker are in different outlets. Power is being given to the load switch from the other 3 way sw. So if I shutoff that “dumb” 3 way switch I can’t control my “smart” dimmer switch. So if power is on one side but load is on the other do I still have to have 2 switches? And is this all still going to work even if I use 2 smart switches?

@hyunopoien6918 2 года назад

@marty use the traveler to pigtail off the power and feed the power to the other side to complete the circuit

@zawaprz 2 года назад

so why do u need 2 switches? u can control with your phone/voice having only one in the circuitry

@samebasser 2 года назад

A few times you mention that the neutral wire is needed for the wifi functionality. Is this true? I only have a neutral in one of the two junction boxes. I don't need wifi control but would like to make use of the dimming functionality.

@ThisIsReMarkable 11 дней назад

I don't have these switches installed so take this with a grain of salt but I can't imagine not connecting it to wifi would prevent dimming from working

@SBE3000 2 года назад

Husband's wants smart switch. We have nothing like what everyone else has. I have a double pole 2 switch3way circut with power to fixture first, not switch gang box.

@theshepkita 2 года назад

I have one switch that turns the lights on. The other switch dimmer lever LEDs don’t light up when the lights are on.

@isaactatineni Год назад

I have the same problem. Any solution found ???

@ryanterry1211 2 года назад

Can these Feit smart dimmers be wire with the load (Light) in the middle?

@nivenive4589 Год назад

I have the same question.. I tried this and didn't worked.. did it worked for you ?

@willscotmont 7 дней назад

Why do you have the TV on while you're creating this video? It is equally as loud as your voice. It is very distracting and spoils any message that you have. I'm out of here.