How To Install Flooring Against An Exterior Door

Подписаться 23 тыс.

Просмотров 62 тыс.

50% 1

How To Install Flooring Against An Exterior Door
We are going over a couple examples of how to install flooring up against an exterior door so if that is what you are looking for, you are in the right spot! We show you what it would take to install if you're using quarter round or what to do if quarter round just won't fit underneath the door. We also show the front door and the back door that way you can see both aspects of how the flooring is installed from the front to the back. Hope you enjoy!
Please leave your questions in the comments and I will see you on the next one!
If you have a detailed question, please send 📷 pics of the problem and your question to
📧 YouFloor.net@gmail.com
☕️ Buy YouFloor A Coffee ☕️
www.buymeacoffee.com/youfloor
Thanks to all the supporters and subscribers of this channel! 😁
If You Like This 📺 Channel, Check Out Our Other Channels Below:
📱 iFloor . . . with him
/ @ifloor...withhim9721
📱 Rent This Flip That
/ @rentthisflipthat
📱 UnIdentified Channel
/ unidentifiedchannel
🌐 Facebook Page
/ youfloor.net
🌐 Facebook Group -
/ 769392503713895
This is a private FB group where we can all get to know each other a little better! A place where you can ask questions, share your stories and experiences, and maybe even learn a thing or 2!
Tools You May Or May Not Need: (Affiliate Links Below)
Dewalt Oscilating Tool
amzn.to/3yRKyhv
Dewalt Table Saw
amzn.to/3yYJQ2c
Silver trim pry bar
amzn.to/39R7Qd5
Dewalt Razor Knife
amzn.to/39b8JN5
Tape Measure
amzn.to/3wJj7Ue
Pry Bar
amzn.to/39Gbdn5
Oscillating Saw Blades
amzn.to/3vdMMnS
Safety Glasses
amzn.to/3Fjvuun
Floor Mallet
amzn.to/3sU4vQX
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I will receive a small commission (at no extra cost to you of course). This helps support the channel and allows me to continue to make videos like this. Thank you for your support!
#HowTo #FloorInstaller #Laminate

Хобби

Опубликовано:

21 май 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 46

@thomasweaver1562 Год назад

Finally someone explained this!!! Thank you! No one shows this kind of stuff, just like your fireplace video. Thank you again!

@YOUFLOOR Год назад

You got it Thomas. Thanks for the comment

@Donna-vh5ym 9 месяцев назад

I know this is a year old, but I just found your channel and immediately subscribed.

@YOUFLOOR 9 месяцев назад

That's awesome. I appreciate that. See ya on the next one

@maalberico 4 месяца назад

just what i was looking for thanks for the video! You got stones man…no riving knife & no fence 😅

@YOUFLOOR 4 месяца назад

👍Thanks for the comment

@krischenevert1954 Год назад

It is amazing you are doing this with no knee pads 😮

@YOUFLOOR Год назад

They are built in at this point. Lol thanks for the comment

@jason91205 Год назад

I have started installing my pergo and running up to the rear door now. I knew my boy zenon would have the answer for me ha!

@jennifermccraw7687 6 месяцев назад

Thank you! Attention to detail is so appreciated!

@YOUFLOOR 6 месяцев назад

Thank you👊

@terrenceellis2417 10 месяцев назад

I appreciate you!!!

@jgn1977 Год назад

Impressive you explained this very well while recording a video by yourself. Great video.

@YOUFLOOR Год назад

Wow! Do t get that often. I appreciate that. It does stretch out the job a bit bit it's worth it if I can help Someone. Thanks for the comment

@YOUFLOOR Год назад

@Xanhorn I'm reaching out to my commenters to make sure you know I am giving some tools away for Christmas. If you are interested in entering click here for details - - - - - > ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iQOXh0b-_dg.html

@BrivaliPoodles 9 месяцев назад

This is so helpful! Thank you so much!

@YOUFLOOR 9 месяцев назад

No problem. Thanks for the comment

@foscamramos7390 10 месяцев назад

What a great video. Excellent explaination

@YOUFLOOR 10 месяцев назад

Appreciate it. Thanks for the comment

@christopherswenson8167 Год назад

I'm going to install a WP Laminate product that is 12mm with pad. Do I need to put an underlayment down first? Going over the top of a wood subfloor. Installing in Living Room, Dining Room and Kitchen. I just can't find a good answer to this question. Subfloor is insulated from under the house with double layer vapor barrier over the ground.

@YOUFLOOR Год назад

With what you said, you should be fine to go straight on the subfloor. When the pad is attached, there is no need for additional underlayment. It can make the floor feel squishy. You definitely don't want to put plastic on a wood subfloor, as it can trap moisture. They make an underlayment to put under your lifeproof. It is a little more rigid and made to offer more noise dampening. We installed it on this job, and as you can see, it didn't make a lot of difference in sound. So, to be honest, I would go straight down on the subfloor. Hope that helps. Thanks for e the question ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yMSYKzsEbzA.html

@erictuck2678 Год назад

If you have to use the bullnose against the door how do you secure it?

@YOUFLOOR Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fI_X7foacNM.html. Check this video out. Just skip through. I thought I had made a video installing a bull nose at the door, I guess I forgot. But the concept around the hearth is the same as at a door . Hope that helps. Thanks for the question

@ericastier1646 5 месяцев назад

Nice talking and showing. Very friendly nice guy, just for that was worth watching. But there is a more tricky situation when one of the door jamb (the left or the right one) is abutted at the corner of a wall, then you do not have the ease of being able to slide the two pieces for the door transitions as you do in this video. But i already found the solution. You have to use a small block plane to nip the lip on the boards so that you can slide them into each other when they're laying flat and you have to cut one door jamb a tiny small amount higher so that you can lift the board on that side when putting it in place. You use wood glue were you removed the lip. Those are just hints it's difficult to explain with words.

@YOUFLOOR 5 месяцев назад

I know exactly what you are talking about. And in some instances I have exactly had to do that. That for the most part, I try not to cut the lip off of anything and also when I do cut my lip. I cut it out a slight angle so that the board slips up on steel but still has a small lip to catch. And yes, I use wood glue. But for the most part, I try to use my angle tapper to get it in without having to cut that little lip off. Sometimes I get lucky sometimes I get lucky. Sometimes I don't. sounds like you found the solution man good job. Carry on sir

@ericastier1646 5 месяцев назад

@@YOUFLOOR Just to be sure i meant the lip not the tongue or groove those remain so there is still plenty of surface for the glue to stick to.

@YOUFLOOR 5 месяцев назад

@ericastier1646 exactly. Joe lavender does this on " so that how you do that". He's got great tips as well.

@zachboggs2060 Год назад

Could you please link the spacers from Home Depot? Also, could you please link a flooring install kit you like. Thank you!

@YOUFLOOR Год назад

www.homedepot.com/p/Lifeproof-Dual-Expansion-Joint-Spacer-for-Vinyl-Laminate-and-Hardwood-Flooring-30-Pack-LP2210/316310933 As far as installation kits goes I would just use the spacers a mallet and a scrap piece of flooring as a tapping Block. But I looked on amazon and if I did buy one , I really like this one. Especially the spacers. Good luck on your projectsamzn.to/3cQaXDP

@YOUFLOOR Год назад

@Zach Boggs I'm reaching out to my commenters to make sure you know I am giving some tools away for Christmas. If you are interested in entering click here for details - - - - - > ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iQOXh0b-_dg.html

@dreid4760 7 месяцев назад

If you are leaving a 1/4" gap, how does a 1/4" round cover the gap?

@YOUFLOOR 7 месяцев назад

Here's how to look at it... If you had a Pole that was an inch and a 1/2 thick, and you split that Pole into 4 equal pieces, all the way down, you would take a whole round and turn it into 4 pieces of quarter round, but they would all be 3/4 of an inch by 3/4 of an inch That way, you can cover a quarter of an inch gap and still have a 1/2 inch overlapping your floor. Does that make sense? Hope that helps. Thanks for the question.

@dreid4760 7 месяцев назад

Yes, thanks again.@@YOUFLOOR

@cezheng8624 Год назад

why don't you remove the baseboards when install the last row next to the door. just curios. I am new to this

@YOUFLOOR Год назад

Never thought of that, But I feel like it would be more efficient time wise to leave it on. On another note. The reason we don't pull base board to begin with is really customer's preference. Thanks for the question

@richardpalmer7468 Год назад

How do you attach the quarter round to the threshold if it is metal?

@YOUFLOOR Год назад

You may have to screw ot down or use glue. I use pl 3x

@YOUFLOOR Год назад

@Ce Zheng I'm reaching out to my commenters to make sure you know I am giving some tools away for Christmas. If you are interested in entering click here for details - - - - - > ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iQOXh0b-_dg.html

@sandyv2195 Год назад

So wanted to watch this and I'm sure it contains great information. But the jerky camera movements and out of focus shots are vertigo-inducing for me. (Also would prefer no music, though I could deal with that if the other two issues weren't present.)

@YOUFLOOR Год назад

Sorry to disappoint. It gets better once you make it past the 1st minute. Thanks for trying though

@peteryeung111 2 года назад

It’s hard to watch. Please improve the camera work, drop that music. Your intention and instructions are good. Just need some improvements. Just a bit of Construction criticism.

@YOUFLOOR 2 года назад

Thanks for the tip. Any tip how to improve camera work. I do everything myself. Hard to work and hold the camera. Figured the work would compensate for the fact that I'm not a professional camera man. I'm a professional floor installer. Tha ks for the comment

@peteryeung111 2 года назад

@@YOUFLOOR We all learn. Keep up the good work sir. Cheers!

@YOUFLOOR 2 года назад

Ty👊

@YOUFLOOR Год назад

@peter yeung I'm reaching out to my commenters to make sure you know I am giving some tools away for Christmas. If you are interested in entering click here for details - - - - - > ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iQOXh0b-_dg.html