HOW TO INSTALL LED ROCK LIGHTS THE RIGHT WAY! 

@Coffey's Garage - Not sure if anyone has pointed this out but you're running 180watts worth of lights, at 12v that's 15amps. The switch you are using is only rated for 5amps. You put a 30 amp fuse on there... I'd highly suggest throwing in a relay so you don't burn out your switch, just a suggestion. I doubt it would be a fire issue since you have a fuse, but better to be safe than sorry and lose that nice truck.

Thanks for the video! Just installed 24 rocks lights on my truck and followed your guidance. They look awesome

Great Job! Looks awesome my friend.

Love the Camo on your truck😌🤟🏽 Saw ur truck today just now and me and my Dad loved it

Very nice. That's tough. Standing ovation for the end result

just bought mine I can not wait!

Looks sick af I’m going to buy some for my 3rd gen

Clean looking truck next should be the cab light and the mirror lights to clear to match the rest 🔥🔥

Bro that’s a slick piece of Ram 🐏 there!!! If you add like a sound module between the switch & the load (lights) them bad boys would dance to the sound of the old music in that bad boy!!! Super good video slick!!!

“The right way” proceeds to drill into his cab

That looks great; especially for a white truck.

Looks awesome man! I’m definitely going to install them on my truck!

Enjoy watching your vids, and the truck looks awesome. Keep up the work!

Yo my man that's 💯 I have 2023 f350 xl looking to get lit 🤪 🔥 nice !!

These look sweet! I really like the look of the bright white. I have a 2019 Ram as well, but it is black. I was wanting to go with RGB though so I could swap between red and white.

Bro you gotta keep uploading man. This channel has a ton of potential

Man thats one clean Ram🤩

The new body rams with the new LED lighting are the best looking trucks at night in my opinion

I love the truck man, I just ordered 22 auroras for my ram 3500 but my question is, how much wire should I buy of each color so I’ll have enough?

Awesome vid!

How did you connect your wires to the switch? Did you solder them? I can find any small connectors for the switch, I ordered the same one you got

Really turned out awesome by any chance do you remember the size wires you used to run the lights

what did you use to connect it to your battery? and what amp fuse?

Bro, such a clean ass job!!! I plan on doing the same. WHAT SIZE FUSE DID YOU GO WITH?

What lift and wheel setup do you have on this video it looks really clean!

Did you end up running a wire to your dash to turn them on and off whenever you like? Or do they just stay running when truck is on?

Thank u.. I have the same truck 2019 2500 Ram

Good video man

Will the ones on the middle of the body (drilled into floor) not poke through in the cab?

You have a new sub bro

Never going off road, big black void in the center, thanks transmission - will look great cruising the mall on daddys credit.

There’s no wire harness kit for the rock lights? I see only the fuse to the switch then to the lights. Correct?

Sick dude

Hey man nice truck it lookks great! You think you can send a link of where your harnes and everything

What kinda of fuse holder did you get and can you share the link?

how did you connect all the wires to one. A distribution block? Or did you just run them all

Do you have to drill it in or can you use double sided tape too? Mine’s a lease.

I'm looking into getting these for my ram 1500. How are they holding up on your truck and how often do you use them

Looks awesome , where did you get that switch for the on off

How is every one splicing the wires off the lights onto the main lead wires? Used t taps but i think theyll hold moisture and mine already arched out

Great truck bro got the same lights running 12 of them Amazon has really went up on the price when I bought mine the where 60 bucks

Just installed 20 rock lights on the Suburban on my channel! 👍🏻

Great video! What number fuse are you running ? 15 20 25??

How are they holding up? Im looking into getting the same kit as you nuy want to make sure they actually hold up. Thanks!

Awesome.

How did u run the rear wheel well lights to the front ?? And also how did u wire it all to the switch if you could explain again I didn’t completely understand

Hey man, I was looking into doing these lights and I saw you drilling into the cab next to the frame. Could you see the self tappers coming through the bottom of the cab if you pull up the carpet?

What wires did you run onto the switch and did you power them to the battery?

What gauge positive/negative wire did you use? I used 18 gauge to extend the positive/negative wires from the module to my battery and the positive wire burnt down after a long drive right after installing them could this have been because I should’ve used 16 gauge or 14 gauge or because of heat somewhere under the truck or in the engine bay? They were connected straight to my battery but only the positive burnt down the negative wire was fine and was also 18 gauge and ran right along with the positive. Any suggestions?

What color white do you have on your truck pure white or is it a oxford white?

Could you let me know what the tire/wheel sizes are 22x12 or 24x12? And what tire size

How do you add the rubber mounts i can't seem to figure out how they fit on the light due to the wire on on the end

How did you wire the switch and do you have an inline fuse ? If you do how did you wire that Bc I’m putting 16 on mine and not sure how to wire them to a switch

what is your tint set up, looks amazing! would like to do the same to my 5th gen

rocklow-x led rock lights has some for $312 and its only 16 but there bluetooth and you can chnage the color options sound worth it or no? Looking into getting some

does it have bluetooth? i got some lights very similar for free and im having trouble with them

So I had rocklights installed on my truck already and want add more. How would I do it

I’m getting the jimjoy 18 rgb rock light kit off amazone for my 2nd gen

Is the black wire a ground or does it go to the negative terminal?

Seems epic and necessary for off road use. On road, however, would make the truck scream ex-con.

Do 12 of them come in 1 package or if I want 12 I order QTY:12?

How did you gloss out the black strip between the windows?

Clean !, sub

Did you install a relay or went directly to the battery ?

What gauge wire are the rock lights??? What gauge wire did you run from the rocks to under the hood

I put 4 white ones on my atv. $32 for 4 pods. 370 lumen 3cree chip led.

Where did you pick up the halo on/off switch at?

Such a bro dozer. Can you make them strobe along with your Cowboy Troy CD? 😂😂😂

What type of red and black wiring did you use?

What gauge wire did you use how are the now if you still have the truck

Did you wire in any relays?

How well do rock lights work on the trail? Like after going through mud and snow? Can't wait to see you use the rock lights off-road.

How did you make the door posts gloss, tint?

How did you go about connecting all the wires together into one? Did you use splice in's or T-Taps? Trying to figure out how to wire all 30 mine together

Correct me if I’m wrong but you connect all the rock lights together then to the switch and then the battery?

Are you grounding each light separately ? I’m wiring in my rock lights as wel and don’t know how I wanna ground all of them especially the rears

Where did you get that flim on your windows divider?

Looks great! Did you run a individual wire for each light all the way to the front?

Love your videos! When will you update?

Thanks

What type of running lights are you running on your mirrors?

Anyone have rgbw rocker lights and the yellow marker lights? Im curious how that would look with the yellow up top and different colors below, thinking about maybe doing this set up with all white rockers or changing the marker lights to white and doing rgbw below

Pros to mounting to cab instead of frame?

I can’t get mine to work, keeps blowing fuses. All the lights turned on when I went straight to the battery and then didn’t work after I added the fuse. Any ideas what it could be

What gauge wire did you use for these?

I went with 1.5 inch self tapper with a 10mm head there bigger then needed but hold securly

Are those stock headlights..they are pretty bright..

Where are u located I just got some no one here in LA, do unless I'm not looking correctly..

I’m assuming they were ran straight to the battery with a fuse followed by a switch out to the lights?

Did you have to get extensions for these lights!

How they tinted those tail lights ?

Where’d you order all of your wiring stuff from?

Did you use a fuse box ?

What brand of lights were used?

What size self tappers did you use

So y’all put 3 in each wheel well and where did y’all put the other ones at?

Did you use a relay?

Are they legal to drive around on city streets cause their white lights?

Still waiting on that garage drywall video!

Want to do this to my white 2020 limited but don’t look forward for the install