HOW TO INSTALL Maxton Design FRONT SPLITTER to my BMW 1 Series!! 

Great improvement Josh! It looks wicked. 👍🏻

I’ve got a 116i and I’m not confident in doing mods but I’ve started doing them from this year. You are doing good work, keep it up

Transforms the front end👏🏼

Nice! You make driving a stick shift look easy.

Tnx Josh. I was on the fence with Maxton splitters but after watching your video I’m going to purchase one for my 2021 X5 M-Sport….

Just received mine for the bmw 123d e82 can't wait to get it on good video!

The little mods makes the car look aggressive. Great video Josh. 👍🔥

Just a word of warning.... but you really do need to remove the front bumper and use bolts. I installed mine with self tappers and it came off at speed.... not good!! I used 12 well anchored screws but they simply ripped out under load. The Maxton installation guide clearly states this. Take it easy guys 👍🏻

Good job mate 👍

Love it Josh, side skirts and a spoiler would look great!

Hi, the screws of splitter use the original holes of bumper? or you need to apply them making new holes..? thanks

Do the series splitters only come with the face lift models?

Hey man Does only a front splitter without sideskirt still look good?

Where did u get them screws? Got the same car might do the same

I’m about to install a Maxton front lip on my ‘21 Tiguan RLine, so I haven’t even done it yet. But I can already give you a tip hahah… REPLACE THOSE SCREWS WITH BOLTS/WASHERS/LOCK NUTS!!! Using a screw on both ends to temporarily hold it where you want it is definitely perfectly fine (and a good idea), as it’s better than tape and you’ll drill those holes anyway. But after it’s on like you have it at first, go through a drill the holes and use bolts. Many benefits like they’re stronger, won’t come loose over time and perhaps most importantly - once they do eventually rattle loose you won’t puncture a tire as easily (although yes you can argue that at 65mph + it won’t much matter… but still.) I recommend replacing all those screws with bolts and rubber washers and locking nuts man. The holes are already pre-drilled by the screws anyway… Take the extra time to do it right dude, your car deserves it.

Hi mate I have got a 118i 2015, been looking at getting some gloss black mirrors but wasn’t sure where to order from, where have you ordered yours from ?

Nice man. Did they provide their own screws or you had to buy them yourself?

I was thinking of this splitter but hate logos Can this be removed? Does it just sit smooth on it or what?

Did you drill the holes first or did you just drill the screw straight in?

Do you need a m pack bumper to instal the lip?

Nasty mate makes such a difference, diffuser and spoiler next?

Looks great did it come already painted

Did the splitter hold with self tappers ?

Nice build bro, i got a 218i (1.5 3cyl b38) and i’ve done my fair share of mods, lmk if u wanna race / do a few pulls or even a video together. Im stage 2 btw 👀

Did the screws come with the splitter? Or u have to buy them separately?

You have the M pack 1 series ?

Insurance up another grand jk make great video

How old are you bro? Sweet car

Should have used the bolts not screws

DO NOT REMAP THIS CAR. see what happened to BRETT BARNES car when he remapped it

That lip is gone in 5th gear lmaoo. Self tamp screws noo buenoo

A video showing how NOT to fit a splitter . No bolts used at all is criminal & using self tappers all over the place is absolutely laughable. Maxton design stuff is utter garbage so I don’t understand why anyone in their right mind would install the rubbish plus it makes every car way cheaper looking after fitting