We are going over the steps to install Ford Performance Mustang Hood Struts to "Take Two".
1. Remove Battery Cover - 0:25
2. Cut Out the Template - 1:00
3. Punch the Starter Hole - 1:37
4. Drill Battery Cover - 2:06
5. Install PS Upper Bracket - 2:41
6. Install DS Upper Bracket - 3:22
7. Install PS Fender Bracket - 4:00
8. Install DS Fender Bracket - 5:12
9. Reinstall Battery Cover - 5:31
10. Relocate Washer Hose - 6:00
11. Install PS Strut - 6:12
12. Install DS Strut - 6:45
13. Remove Hood Prop - 7:02
14. Show it off! - 7:29
Installation Instructions:
performancepar...
Products Used:
This video contains affiliate links for which I may receive compensation.
Ford Racing M-16826-MA Hood Lift Kit - amzn.to/3pwYRm7
Step Drill Bit Set - amzn.to/3C53B7C
3/8 in. Drive Metric Hex Socket Set, 9 Pc. - www.harborfrei...
3/8 in. Drive Click Type Torque Wrench - www.harborfrei...
Tools Required:
Torque Wrench (20 ft-lb Setting)
6 mm Allen Wrench and Socket
1 inch Stepper Drill Bit
Hand Drill
10 mm Socket
Center Punch
Scissors
Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on RU-vid is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on RU-vid. Use this information at your own risk.
#FordPerformance #HoodLiftKit
23 окт 2024