How to install the AAW Wiring Harness in my 1966 Mustang

Подписаться 19 тыс.

Просмотров 5 тыс.

50% 1

Check out my new website for car parts and merch that I am selling - krusebuilt.com/
In this video I install the popular American Autowire Wiring Harness in my 1966 Fastback. I also purchased the AAW wire crimpers and I'm glad I did, it made the wiring job much easier.
American Autowire Wire Harness - Part number 510125 - Amazon Link: amzn.to/3JanSx6
American Autowire Crimpers - Part number 510587 - Amazon Link: amzn.to/3QfHkfR
Nylon Braided Wire Loom (various diameters) - Amazon Link: amzn.to/445b6tr
3/4" wide cloth tape (better than electrical tape) - Amazon Link: amzn.to/4aJvVwt
The car is a 1966 Mustang Fastback with a 347 Stroker and T5 transmission.
Shot with GoPro Hero 9 with the Media Mod, edited on Davinci Resolve 17.
Gear I use:
GoPro Hero 9 Black - amzn.to/3ZCTpP7
Media Mod for GoPro Hero 9 - amzn.to/3CPKOi2
Rode Wireless Go II mic kit - amzn.to/3iJrj4c
GoPro Hero 8 Black - amzn.to/3QLpj7V
Media Mod for GoPro Hero 8 - amzn.to/3ZCAeoA
GoPro Hero 5 Black - amzn.to/3XuKMUQ
GoPro Karma Gimbal for Hero 5 - amzn.to/3GIWa8P
Want to help support this channel, you can "buy me a coffee", check it out! www.buymeacoffee.com/krusebuilt
Credit for the music in the video:
::::::::::::::::::::
Epidemic Sound
Try it today! www.epidemicsound.com/referra...
::::::::::::::::::::
#krusebuilt
#kruseview
#Mustang
#1966
#fastback

Авто/Мото

Опубликовано:

17 апр 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 94

@mrvango3648 2 месяца назад

Thanks for the video, you were right to go with the American Autowire kit, I used a Painless kit on a Dodge car that I had a few years ago and not nearly as good. Like a person commented on earlier, your next purchase should be fender covers!!! Watch out what you put on your fenders and don't lean up against the car with your jeans on..., that is some nice paint.

@AndyKruseChannel 2 месяца назад

Yeah, the AAW kit was fantastic. I don't care about the paint as much as others do. :)

@FaustKnight 2 месяца назад

In Houston we have summer projects, don't wanna be in a hot car in 106 degree heat with 90% humidity haha. Problem is the garage is even hotter.

@AndyKruseChannel 2 месяца назад

We get those same temps and same garage problems where I'm at, but coupled with frigid, bone chilling temps in the winter. So really there's only about 4-5 months of manageable weather, gotta get it all done in that small window. :)

@FaustKnight 2 месяца назад

@@AndyKruseChannel I put my new 320hp 302 in today, it was only in the 80s but it felt like 100 with all the humidity. Gunna be a rough year.

@bjsteg79 2 месяца назад

Picked up the same for our 67 for the exact same reason. Too many hands have been in this car over the past (nearly) 60 years. Single wire alternator, no more voltage regulator, easier to run 12v to a pertronix, MSD, or HEI coil, extra relays, room to add more restomod goodies down the road. It's an upgrade all around.

@AndyKruseChannel 2 месяца назад

Yeah, this kit is tough to beat. Good luck with your project!

@jmailbell 2 месяца назад

I went with the Painless for my 66 Bronco build which is waiting for the body shop. Now I kinda have buyer’s remorse after talking to others that have installed both Painless and AAW. They say the AAW is more complete and has much better instruction and diagrams. You’ve done a great job on routing your harness, it’s almost invisible!

@AndyKruseChannel 2 месяца назад

Thanks! Your next project can use an AAW kit. :)

@mbaribea 2 месяца назад

I've used American Autowire for my two cars, great kits!!

@AndyKruseChannel 2 месяца назад

Great kit, I'd do another one if I had to. :)

@mwalt7 2 месяца назад

Awesome Andy!! Another huge milestone checked off to get it closer to enjoying it again.

@AndyKruseChannel 2 месяца назад

😁

@davevan8864 2 месяца назад

I installed a firewall forward harness during my 2019 resto of my 66 2+2. I made it look good but like you.....not wild in hiding wires. thx

@AndyKruseChannel 2 месяца назад

Sometimes the juice is not worth the squeeze. :)

@414horns 2 месяца назад

Really helpful. You are the man Andy!

@AndyKruseChannel 2 месяца назад

I appreciate that!

@vaughnstevens8396 2 месяца назад

Thanks I was going to go with the pain less but now i have changed my mind. My next project after the headliner.

@AndyKruseChannel 2 месяца назад

I was very happy how it turned out, those instructions are nearly the best part of kit. :)

@tonykluytmans5336 2 месяца назад

Thanks for this video Andy, interesting and enjoyable

@AndyKruseChannel 2 месяца назад

Glad you enjoyed it. :)

@nikonhckr 2 месяца назад

I used the AAW 1970 update kit wiring harness in mine. Best upgrade you can do. Buying the crimping tools made for their terminals makes things a lot easier/faster.

@AndyKruseChannel 2 месяца назад

Agreed. :)

@mellis181 2 месяца назад

This is exactly what I’m doing now. Actually I’ve been doing it for a while. 😊 Look forward to see how you tackle it.

@AndyKruseChannel 2 месяца назад

Hope you enjoy it!

@Seanmonty88 2 месяца назад

Thank you for posting this. I am about to start my install with this kit tomorrow

@AndyKruseChannel 2 месяца назад

You've got this! :)

@bryanpiereson8083 2 месяца назад

Doing the harness after paint work is great. Both times I've had cars bare metal repainted they've come back with an assortment of electrical gremlins

@AndyKruseChannel 2 месяца назад

Yeah, it seemed like the best time to take this opportunity. :)

@johnnix4370 2 месяца назад

I’ll go with this kit when I re-wire my f100. Looks pretty simple.

@AndyKruseChannel 2 месяца назад

I think the higher cost is worth it, especially for their included wiring instructions. :)

@rcadd1ct 2 месяца назад

I did AAW on my 72. Definitely worth it. For the extra cost they give you a lot extra that others don’t. You pretty much need the double wire crimp tool. I got both, but there were better single wire crimpers.

@AndyKruseChannel 2 месяца назад

I could have gotten by without the larger of the two crimpers, but here we are. :)

@GeeBoogie78 2 месяца назад

Looking good brother👍🏾

@AndyKruseChannel 2 месяца назад

Thanks!

@johnkopp 2 месяца назад

Great video! And great timing! My son and I are getting ready to do his 65 coupe. Already have the kit. Now thinking about the crimpers. Thank you!

@AndyKruseChannel 2 месяца назад

Good luck, you’ve got this!! 😁

@mitchmadden1938 2 месяца назад

Nice work! That different style loom is the way to go! Glad you went with A.A! To me the harness in the mustang was easier compared to the harness I did in my 75 F250!

@AndyKruseChannel 2 месяца назад

Thanks! 😊

@SlowInFastOut1776 2 месяца назад

Looking good! The real test will be when you put power to it to make sure nothing got crossed…ask me how I know 😂

@AndyKruseChannel 2 месяца назад

How do you know? :)

@5798Mike 2 месяца назад

Good wrk 👍

@AndyKruseChannel 2 месяца назад

Thanks! 🙂

@GolfGuy54601 2 месяца назад

Just used the same kit on my 65 about 6 months ago? My back still hurts! 😂

@AndyKruseChannel 2 месяца назад

Yeah, but the kit went it great and everything works, right?! :)

@GolfGuy54601 2 месяца назад

@@AndyKruseChannel yes, it everything works great, it’s expandable, and it’s great piece-of-mind knowing its new wire. FYI - I installed a Vintage Air HVAC system in my car when I rewired it. Really nice system. I would definitely recommend it.

@franswijnands4022 2 месяца назад

Andy ik zeg het nog maar een keer je kleur keuze gewoon geweldig

@AndyKruseChannel 2 месяца назад

Thank you, I appreciate that! :)

@MinnesotaDavid 2 месяца назад

I used the painless (10123) on my 67. The first thing I did was throw away the vinyl terminal kit that came with it and used heat shrink terminals instead. The worst thing that can happen is a terminal coming off of a wire and starting a fire. Take your time installing the kit and use a good braided wire loom for running your wires.

@AndyKruseChannel 2 месяца назад

Good advice.

@mellis181 2 месяца назад

Did you video the process of drilling the holes in the wiper motor bracket and mounting the relay block?

@AndyKruseChannel 2 месяца назад

No, partially because it's hard to get a camera in there and drill the holes. It was easier than drilling the holes for the main fuse panel. :)

@williamdozier5190 2 месяца назад

excellent video Andy, glad to see more on the mustang, keep them coming✌

@AndyKruseChannel 2 месяца назад

Thanks, will do!

@bryanpiereson8083 Месяц назад

You might want to save your old harness. I'm putting in Dakota gauges. I think I can salvage color coded wiring to make connections with the Dakota module which would otherwise get confusing if trying this with one color from a spool. Plus, some of the connectors are unique. The ign switch connector, in particular. With my new harness, plugging it in was fussy. It works, but I wonder if one of the spades went in above or below its mate.

@AndyKruseChannel Месяц назад

Thanks for the heads up.

@wolfthornhawkridge5705 2 месяца назад

You’ll be happy with this kit! Nice job, where did you source the headlight connectors? Cant say I’ve seen them with the wire coming out the side.

@AndyKruseChannel 2 месяца назад

That was on the car already, I'm I saved them from the old wiring harness, the fit is so much better. :)

@jimfowler9143 2 месяца назад

Andy thx for the video! REALLY good..I'm doing the AAW kit in my car as well..... my challenge is my car is a shell...and I'm putting it together without an original or even good pics....like doing a puzzle without the picture on the box. .. Curious how your loom running is going..didn't see that in the vid. ..were the wires all long enough when you ran them in the fenders or did you have to modify?

@AndyKruseChannel 2 месяца назад

I had more than enough loom, by like triple. I didn't even use the large diameter stuff. The wire length is perfect for all of the circuits, you do not need to worry about making things fit because a wire was too short, or something like that, you'll have plenty. The AAW instruction book does a great job outlining where everything goes, even for the more novice hobby people. :)

@jimfowler9143 2 месяца назад

@@AndyKruseChannel cool thx!...great to hear. For a Canadian the AAW kit is over a grand and was hoping they weren't skimping on length (extended wires are problematic when shooting an issue a few years later)

@MrJoea11 2 месяца назад

Andy I have this same AAW kit as well and wanted to pay someone to install, now from this video I might want to take on this task. I’d be interested in your AAW crimpers to buy or rent. I also would like to see your electrical fan/separate circuit installation video. Would be very helpful. Great video.

@AndyKruseChannel 2 месяца назад

I'm not wild about renting out my tools, and for now I plan to keep them. I have a few videos on the wiring and install of an electric fan, it's more or less the same. Using a temp switch in the thermostat housing to be the "ground" when a specific temp is reached, which completes the circuit in my relay, and powers the fan(s). In my most recent wiring of the fans, I had a single large fuse in front of the two fans, but I rewired it so each fan has their own fuse, nothing fancy. :)

@MrJoea11 2 месяца назад

@@AndyKruseChannel OK thank you. Let me know if you change your mind and decide to sell them. 😊

@musicman_hd607 2 месяца назад

bros in my head.just started this the other day

@AndyKruseChannel 2 месяца назад

Hopefully there's a nugget of helpful info in this video for you. :)

@andrewdipietro4538 2 месяца назад

Awesome video. I’m about to start this process on my 65. Are you willing to sell or loan your crimp tools? Thanks.

@AndyKruseChannel 2 месяца назад

Cool, good luck with the wiring project, you've got this! No, I do not plan to sell or loan my tools.

@grfilmz8363 2 месяца назад

Check out cobra automotive Andy, you should get the black head light covers for your headlight it would look cool. Or maybe the yellow ones and the deep wheel lug nuts they sell.

@AndyKruseChannel 2 месяца назад

Don't tempt me! :)

@SmackeysGarage 2 месяца назад

Nice. Must have been a long video to edit being 40 minutes! The best time to do wiring is when the engine and interior are out. Definitely making great progress on it!

@AndyKruseChannel 2 месяца назад

I trimmed a lot, despite not wanting it to be as long as it is. :)

@ChipperskisTahoeChipper 13 дней назад

Thanks for the video. The Amazon link you have for this harness is about $200 cheaper than the list price at the AAW website? Do you know why? I want this harness and would love a $200 discount, but not if there is a chance something could be defective. What do you think?

@AndyKruseChannel 13 дней назад

AAW prefers to sell their products through vendors. The price on the AAW site is the suggested retail price. Vendors normally sell it at the suggested price, but they also offer sales and discounts from time to time. $200 is better than what I paid for it, grab it!! The important thing is making sure it's new (which it is) and the correct part number for the car you have. The 510125 is the correct part number for the 1964-1966 Mustang. :)

@hughphillips67Mustang 2 месяца назад

Can i make a suggestion? You said you have new carpet. Before you put your new carpet in, go to Lowes, and pick up 3 rolls of Frost King furnace duct insulation. You can put it down on the floor for a sounds deadener, and it will deflect heat from the exhause. You can buy Dynomat, but Frost King does the exact same thi g, at a fraction of the cost. Ive used it for years on my builds. Just a suggestion. You can thank me later.

@AndyKruseChannel 2 месяца назад

Too late. :)

@hughphillips67Mustang 2 месяца назад

@@AndyKruseChannel figures. Well, remember that when you get ready to do the truck. It makes a HUGE difference in keeping the road sound out for sure. And the heat will be lower so you don't feel like your in a microwave in the summer.

@PapaVrooom 2 месяца назад

Get some high density foam to lay on... especially over the rocker.

@AndyKruseChannel 2 месяца назад

Nah, scratches add character. :)

@grfilmz8363 2 месяца назад

Could I buy that carpet from you Andy?

@AndyKruseChannel 2 месяца назад

Not sure what I'm going to do with it yet. :)

@dougknight1720 2 месяца назад

I think I’ll need to do this to my 66 coupe project. Wiring is suspect

@AndyKruseChannel 2 месяца назад

It's easier than I thought it would be. :)

@dougknight1720 2 месяца назад

@@AndyKruseChannel I have a lot to do on the project but I think wiring needs to be a priority. You forget it’s nearly 60 years old…I hate electrics so it’s reassuring to know it was quite straightforward. Thanks Andy

@SlipperyCouch1 2 месяца назад

Looks like the manual is a lot nicer than my painless mustang harness.

@AndyKruseChannel 2 месяца назад

Life changing. :)

@hughphillips67Mustang 2 месяца назад

First off.....i see you kicked the wife out of the garage to make room for the real vehicles. Lol. Just for conversation sake......why did you pick the fastback over the coupe? Not necessarily the coupe you had, but just a coupe in general. I have both 67 fastback and a few coupes. I personally prefer the coupe over the fastback. But won't ever get rid of the fastback. Lol. Just curious.

@AndyKruseChannel 2 месяца назад

The 65-66 Fastback is one of my favorite cars.

@mbaribea 2 месяца назад

Get that box off your new paint job!!!

@AndyKruseChannel 2 месяца назад

Nah, you and I have different expectations of the paint on my car. :)