How to install the MST INTAKE INLET for the BMW F30 N20 | N26 (328, 320, 420, 428, etc.)

Подписаться 301 тыс.

Просмотров 79 тыс.

50% 1

Hey Everyone,
Today, we're talking about one of the N20/N26's best-kept secrets, the MST Intake Inlet Pipe! The MST Intake Inlet pipe is a MUST HAVE if you're looking to increase performance and decrease turbo lag in your N20/N26!
Looking for one for your car? Check us out at www.kiesmotorsports.com
Thanks for watching and please try everything at your own risk. If you’re interested in a professional installation by Kies Motorsports, please click here: www.kiesmotors...
ALSO, Scroll Down ⬇️ for:
🏎 BRYAN’s BUILD
📬 Kies Contact Info
📽 Kies Motorsports Video Playlists
🛠 Recommended Tools, Gear, and EXCLUSIVE Kies Partner Deals!
🌎 And More!
Bryan
Bryan Kiefer
President
Kies Motorsports, LLC
Hammonton, NJ
Info@kiesmotorsports.com
www.KiesMotorsports.com
Authorized Dealers and Installers of: ProTuningFreaks BootMod3, BimmerTech, AWE Tuning, Evolution Racewerks, CSF, Pure Turbos, Fuel-it, Studio RSR Roll Cages, MST Performance, Burger Motorsports, VRSF, Bilstein, H&R, Injen, Borla, Dinan, GoFastBits, Depo, VMR Wheels, BBS, Sparco, Snow Performance, Nitrous Express, AFE, Akrapovic, Eibach, Hawk, Fifteen52, Koni, KW, Seibon, Stop Tech, Vorsteiner, Wagner Tuning, Wilwood, and many more incredible brands!
🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎
BRYAN’s BUILD 👇🏼👇🏼
Click Here to see links to EVERY PART on Bryan’s Build! 👉🏼 www.kiesmotors... 👈🏼
📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬
Contact:
Website: 🌎 www.kiesmotorsports.com 🌏
Contact: 📩 Info@kiesmotorsports.com 📩
Instagram: 📸 www.instagram.... 📸
Facebook: www.facebook.c...
DRIVETRIBE: 🚔 drivetribe.com... 🚔
Twitter 🐦 Ki... 🐦
📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽
Click below for Playlists of Kies Motorsports videos that will cover Performance, Aesthetics, Retrofits, and even Vlogs!
Click here for ALL of our Playlists!: 📽 bit.ly/KiesPlay... 📽
🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠
Click here for Tools, Camera Gear, and Exclusive Partner Deals!
Tools, Camera Gear and More! www.amazon.com...
Exclusive Partner Deals: www.kiesmotors...
🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰
Special announcement! ProAutoMotion is now a part of Kies Motorsports! Find all the ProAutoMotion products you love at www.kiesmotorsports.com

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 116

@martinllanos4998 6 лет назад

I had an injen intake and the stock plastic inlet broke as i was on the highway and the little $100 part caused my engine to run lean and crack cyl #1. lucky car was under warranty but I feel this part is a must if u have upgraded intake on the n20/26

@KiesMotorsports 6 лет назад

We’ve actually been hearing quite a bit about the stock inlet failing!

@MrHbaus 3 года назад

@@KiesMotorsports It blew up my turbo after a piece broke off and got ingested..... $4000 later.......

@G20eed 2 года назад

same setup same thing is happening i just had to buy a inlet and hopefully my car starts

@odysseytecharts8144 6 лет назад

Thank you for bringing back N20/26 DIY videos!

@ThicWhips 5 лет назад

Doing this next foshoooo. Wish I would’ve nabbed it before I threw my mst intake on!

@Ra69iT007 5 лет назад

I knocked 2 birds with one stone lucky

@Chiefs15879 5 лет назад

tried doing both couldnt find/see the 10mm nut on the inlet so gave up and just installed the intake lol

@BMWFanatic 6 лет назад

Upgraded Inlets are always a great gain! Perfect DIY 👍🏻

@KiesMotorsports 6 лет назад

Yea man!

@joesuee8729 6 лет назад

Ily bmw fanatic

@TheDonz 2 года назад

I did the install with the MSI intake and it was simple. The hardest thing was getting that 10ml nut on, I couldn’t get my wrench on it because the aluminum pipe is too thick, just tightened it with my fingers. The easiest way to get the PCV pipe on is disconnect it from the top first sand it is super easy to get it to click in. Then just click it back in the top after you clamp the inlet in

@FastBackCa 5 лет назад

You should make a GFB diverter valve install video!

@ziamlarry Год назад

Might get lost in the comments. If you are coming to this, when unplugging the stacked vacuum line. Be careful when pulling them out if you still have the stock inlet. The plastic is very brittle and it can just snap off. Especially if you have a higher mileage.

@joshuabarajas6187 Год назад

Quick question, do you know what the top stacked vacuum lines function is? I removed my air box the other day and to my surprise I only have the bottom vacuum line on the inlet. It’s plugged by a rubber piece, not only that but I have the top vacuum line is present but dangling in my engine bay

@Spacewalk11 Месяц назад

Thanks. I took it to a place that said parts were $250, and labor was $1500 lol. Figured I’d give it a shot no matter how hard it is because $1500 labor seems absurd to me for something they claimed they can fix in “an hour or 2”

@harveys.2821 2 года назад

Outstanding video!! Keep up the good work💪🏽

@NotoriousFX Год назад

How this he put that metal piece so easy? I tried putting it so many times. I bought that piece on urotuning and it fits in my n20. The only hard piece would be the black ring around it. It’s not going in all the way. I need help lol

@OGGSTV-wl1pk Год назад

Im struggling with the same thing! He makes it seem like you could just *place* it in. But the O-Ring made it to where I had to wrestle it in. Only to still have the boost leak. Its in but not all the way i think.

@teminiaci 5 лет назад

Great video as always Brian! What kind of games would you be expecting horsepower and torque with this?

@JangYounghwan 5 лет назад

What I don't like on BMW's is that they used so many plastic parts! It wears out so quickly as they gets old! Thanks Brian for sharing good parts and how-to videos!

@bmw_knight_f3052 4 года назад

Thank you brother. I did order it also for my f30 too... you rock✌️👍🤝

@greeked 6 лет назад

They need to make one for the n55 🙏🏼

@Marcoashou1 6 лет назад

hey brian! you should add a carbon fiber roof spoiler for your car and then do a tutorial! it looks amazing on my f30!!

@ShowMeWhatINeedToKnow 6 лет назад

Other than being metal, what are the advantages?

@ChristianFantana 6 лет назад

Show Me What I Need To Know Being metal IS the advantage. There's no give with metal so you won't lose any performance that way. Metal is also more durable and stronger than plastic. If you're adding performance parts to your engine, you want to replace all the weak plastic oem parts you can. 😉

@bait-cz5uj 6 лет назад

Show Me What I Need To Know, I'd like to know the gains too. To say reduced lag and improves performance is a broad statement, sorry Brian. Great video, make everything look very doable.

@PersonA-r5e 6 лет назад

According to MST's website - this intake runs $188 and adds between 1 and 4 HP/TQ across the power band. There are dyno charts on their site. www.mst-performance.com/products/mst-bmw-n2026-20t-turbo-inlet-pipe

@Nguyen2fold 6 лет назад

Looked like the inlet diameter was reduced too. Maybe that reduces turbo lag??? Just a guess

@martinllanos4998 6 лет назад

the part on the stock intake that bolts to the turbo is glued to the rest of the inlet

@doubletwin1 4 года назад

On the 2014 F32 the screws that hold the diverter valve are t30 not 4mm hex makes a big difference in getting that top back bolt out

@carlosskrr 4 года назад

I did this install, and there was oil residue on my turbo where it connects to the inlet is that normal?

@e30brandon 4 года назад

carlosskrr mine was like that too

@anthonypipia6990 4 года назад

If you had to guess how much hp would an inked intake, axle back exhaust, bms stage 1 tune, intake inlet, turbo pipe, charge pipe and intercooler make on an n26?

@V1kash1984 4 года назад

Difference in build quality for sure but wouldn't expect much better flow.

@edgarmartinez-cm7yp Год назад

I saw to videos that help me alot changin

@bigkids9384 Год назад

What should I do if the aluminum pipe can’t enter inside the turbo because the o ring is to bulky ?

@samreynolds9191 10 месяцев назад

I’m having the same issue, u figure it out?

@nathanholst9133 10 месяцев назад

If you see this, I just did this install myself and ran into this issue. Ultimately what ended up working was to come at it from a slight angle, get it in far enough to work on the 10mm bolt to help hold it in place, then use a flathead screwdriver to push in the O-Ring. Keep pushing and tightening the bolt, and eventually you'll get there

@Jamie-iy9es 2 года назад

plastic inlet was already split when I took airbox off, bad news is I split the breather that comes from the front of engine trying to clip it back in to the new elbow so now I have to wait for the dealer to order one in for me :(

@Kingnabor 5 лет назад

Bought my turbo inlet & Er charge pipe!

@charles-nb8gz 2 года назад

stock car can install ftp inlet pipe without changing charge pipe and boost pipe?

@Kungenn 5 лет назад

My inlet has snapped off while being fastened, and I'm wondering if you have any tips of removing the snapped of piece from the turbo? The part that is snapped off is the "neck", where you clamp the turbo to.

@elreks1 5 лет назад

2012 528i ?

@harveys.2821 2 года назад

If that inlet is a bit loose will it trigger an engine code? Thank you

@MindOfStefan Год назад

how would this install be different if you had oil catch can installed?

@hoc3028 3 года назад

great video

@LiyahWillsWORLD 5 лет назад

will this work with an afe intake?

@SmokeySingh101 4 года назад

Yes just all inlet piprs are the same on n20/26

@jacobb9927 5 лет назад

What sensor did you unplug on the inlet? Mine won’t clip in anymore after I put in my new boost and charge pipes. The tab and clip aren’t broken but it won’t go all the way down and clip in anymore.

@silenttruth110 4 года назад

Why hasn’t keis done an oil catch can yet I went with the mishimoto one

@polojock09 6 лет назад

Awesome product just installed it and my car run way harder

@moinakdas7766 Год назад

will the mst turbo inlet pipe work with a cts turbo intake?

@yapkh8 2 года назад

Hi Brien. Where do I buy this intake? F30 2013 bmw 2.0. Malaysia

@Prod117 6 лет назад

Are you ever gonna go big turbo, Brian ???

@aihampaul9590 6 лет назад

I’m trying to buy MST air intake for my 335i 2015, would that I take work for it? Cuz when I’m trying to buy it it says only for years 2012-14

@MrBMW83 6 лет назад

Nice!! But like how many HP increases ?

@KiesMotorsports 6 лет назад

More than 1 HP, less than 100 HP, lol. They say roughly 5. It's one of those parts that you don't strictly do for the horsepower number. The factory piece is a piece of junk. We've had people tell us that the vacuum line cracks off and as you can see it's tiny, flimsy, and doesn't have good flow. Once you tune your car with BootMod3 is when you really want that reduction in turbo lag, but this is also a good "insurance policy" for the N20/N26, just like a chargepipe is on the N55

@cleanish__f30 2 года назад

With this part work with an AFE stage 2 intake?

@sickly0 7 месяцев назад

Man... what if the entire screw comes out? the 10 mm nut came out along with the flange and the other nut on the back. Don't know what to do anymore, im stuck.

@Mugxc 4 месяца назад

What did you end sup doing to fix it? Same problem here

@pvherr 5 лет назад

Done mine today and that little screw is a SOB

@ismaelcortez4935 4 года назад

Will the inlet work with eventuri

@jamestehuna5915 6 лет назад

Isn’t that engine petty much the same as what the 320D E92 have ?

@arubi74 6 лет назад

Is this compatible for a F10 N20 motor?

@johntyler4257 6 лет назад

you da man

@KiesMotorsports 6 лет назад

😀😀👍🏼

@michael5743 3 года назад

I actually just ordered from Kies a MST inlet and air intake.. Will these throw a check engine light or cause the car not to pass emissions?

@armandogrijalva1753 3 года назад

The inlet shouldn’t, but the intake might. Depends on the regulations of your state and if the intake is CAARB exempt or not.

@fondoo 6 лет назад

that 10mm nut is extremely hard to get to. I'm waiting for my endoscope from amazon to arrive so it can guide my socket in.

@KiesMotorsports 6 лет назад

Yea, it’s hard to see. I use my phone to help guide it in place

@skillkrueger 5 лет назад

I actually dropped the nut and ended up getting a different one when I installed my FTP motorsports inlet. I used an endoscope the 2nd time around to line it up putting things back together and it helped a lot. I think it's easier to get to the nut from the underside, anyways it was for me.

@rtjordan1738 4 года назад

Hello i am from jordan i own a car f30 316i how can i buy air antake

@libradoacosta0414 2 года назад

Well this fit 2017 330i?

@bigwill6492 2 года назад

Where can i get this?

@Luis92r 3 года назад

Are there any mods for a 2012 528i? Can't really find shit.

@f30pr58 5 лет назад

Bryan does this inlet pipe fit a AEM intake??? I already have bough charge pipes an intercooler from your website awesome deals

@KiesMotorsports 5 лет назад

Yes, it fits!

@f30pr58 5 лет назад

Sweet thank you so much for the reply ima order inlet pipe right now

@omedina12 2 года назад

I bought this for my F30 N20 but had a lot of issues because the aluminum pipe is thick and doesn't let me use the ratchet straight on. I think I'm going to try to jack the car and go from underneath. Any suggestions?

@marklam787 2 года назад

I think the aluminum piece it actually two. The edge where the bolt goes in screws out from the barrel. Do the price where the bolt goes in first and then screw the barrel in. I had the same issue

@jackrob5142 4 года назад

hey brian whats that connection called that goes into the turbo inlet its that tube one i kinda broke mines taking it off and tried to improvise the best i can but i need to order that part asap

@slimjimmafia 3 года назад

Have you figured it out? Was wondering if it’s safe to drive w/o

@1up17 6 лет назад

Hey Bryan I have the AWE f30 carbon fiber intake do you think that this inlet will work with that intake? Thanks

@KiesMotorsports 6 лет назад

Yea! It will work great!

@Chiefs15879 5 лет назад

i could not find that 10mm nut for the life of me, its on the bottom right side of the inlet correct?

@KiesMotorsports 5 лет назад

It's about the 3 o'clock position

@andyg1443 6 лет назад

Would this be compatible with a different type of aftermarket intake like an injen?

@inkphusion 6 лет назад

I believe he mentions that it will.

@megatronmax14 6 лет назад

???

@ottomobili2575 6 лет назад

im gonna do an install vid on it for the injen in a week

@KiesMotorsports 6 лет назад

Yes, you can use it with any intake

@megatronmax14 6 лет назад

00:25...works with Injen!!!

@levainterk8918 5 лет назад

Does this fix a x1 2014

@Sandia49 4 года назад

Does anybody know what the purpose of this part is? Is this where the exhaust enters the turbo?

@markshaulis 3 года назад

no. this is where the air from outside enters the turbo/engine. the exhaust gas is used to spin a turbine that compresses the air this part sends through. hope this helps

@maciastrn3024 5 лет назад

Where i can buy this inlet&filter box like on this video?

@KiesMotorsports 5 лет назад

Kiesmotorsports.com 👍🏼

@youayang7108 6 лет назад

Mst website sells for $188 will you honor that price?

@KiesMotorsports 6 лет назад

Our price includes the shipping cost, that's why it's a little higher. If you bought direct, you would most likely pay more

@SanMarinoM3cs 6 лет назад

Possible to retrofit highbeam assistance on f22 or f30?

@theprodistini2590 4 года назад

Kies, I have searched all over the internet and haven't been able to find a comparison of the n20 and n47 engine, i am curious in the build differences as i would like to buy performance parts for my engine but do not know which parts can be taken from the has engines, as there doesnt seem to be a large base of parts for the diesel n47. Any help would be appreciated

@KiesMotorsports 4 года назад

You’ll need n47 specific parts if it’s for performance