No video :(

How To Install & Use A Quick Hitch. The Worksaver Quick Hitch Is A John Deere iMatch Alternative.

Подписаться 212 тыс.

Просмотров 282 тыс.

50% 1

How to hook up a quick hitch on your tractor's three point hitch. What are the benefits of using a quick hitch? How to use a tractor quick hitch. Watch this video to get answers to all of these questions. The Worksaver Quick Hitch is an alternative to the John Deere iMatch and Land Pride versions. Many others make quick hitches as well including Speeco, Tar River, and Harbor Freight. All quick hitches are sort of created equal, but sort of not. They will be built to the same ASAE specification to control dimensional spacing, however quality and grade will vary. The Worksaver quick hitch has the most robust design on the market, weighs the most, and has the most substantial cross bracing.
You can order a Worksaver quick hitch through me at Good Works Tractors. We can ship the quick hitch to you! This is a cheaper and superior alternative to the John Deere iMatch and Land Pride versions. Also, for a limited time, your first set of bushings are included at no additional cost! You'll also get a floating top link adapter at no additional cost! Lastly, all attaching hardware is included!
CHECK OUT THIS SPEECO QUICK HITCH! NO BUSHINGS REQUIRED, SAVES YOU MONEY!
BUY the Speeco Quick Hitch! www.goodworkstractors.com/prod...
Buy the Worksaver Quick Hitch! www.goodworkstractors.com/prod...
SHOP: www.goodworkstractors.com
SUBSCRIBE: / goodworkstractors
LIKE: / goodworkstrac. .
FOLLOW: / goodworkstra. .
You can support Good Works Tractors in a small way at no extra cost by purchasing a product in a link below. Certainly no pressure and I only recommend products that I've used and love!
Tractor Cleaning & Detailing Products Used On My Tractors Include:
Amazon Basics Micro Fiber Cleaning Cloths: amzn.to/2O261gk
Torq X : amzn.to/32Jf3Tp
Generic Magic Erasers: amzn.to/34FTKUC
Meguiar's 105 Ultra Cut Compound: amzn.to/2NiCCir
Meguiar's 205 Ultra Finishing Polish: amzn.to/2O31qdH
Car Guys Super Cleaner: amzn.to/2Lz1dxg
Car Guys Liquid Wax: amzn.to/305X4ZC
Car Guys Wheel Cleaner: amzn.to/3014Uov
Car Guys Tire Shine Spray: amzn.to/2Oal1Zo
Car Guys Plastic Restorer: amzn.to/300vuNI
500 Lb. Storage Cart w/ Casters: amzn.to/2O5wdqm
These are affiliate links and I do receive a small commission. I would appreciate your support! These tractor cleaning and tractor detailing products are some of the best I've used. I'm constantly trying new products to provide a superior finish. If you have a suggestion of a product I should try, then please let me know!
This video is brought to you by Good Works Tractors. If you're in the market for a tractor or attachment, then please shop at Good Works Tractors! www.goodworkstractors.com

Опубликовано:

23 сен 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 81

@GoodWorksTractors 4 года назад

CHECK OUT THIS SPEECO QUICK HITCH! NO BUSHINGS REQUIRED, SAVES YOU MONEY! BUY the Speeco Quick Hitch! www.goodworkstractors.com/product/category-1-e-hitch-quick-hitch-no-bushings-required/ Buy the Worksaver Quick Hitch! www.goodworkstractors.com/product/worksaver-quick-hitch-a-john-deere-imatch-alternative/

@semco72057 4 года назад

I have a quick hitch attachment on both of my tractors and love them so much. They make it easy to hook up the implements to my tractor and glad that I got these attachments.

@brandonletzko2472 2 года назад

Just attached my new Speeco cat 1 quick hitch (ordered from you) using these instructions. Thanks!

@henryrodgers3409 4 года назад

Another great how to video . Great information for the new tractor owner . Much better than watching someone cutting rounds .

@GoodWorksTractors 4 года назад

😁 Thanks Henry!

@freecycling6687 2 года назад

Great video, thanks - it answered a bunch of questions that I had!

@richardbarreau2844 4 года назад

Thanks for clearing it up!

@rudemechanical696 2 года назад

Just what I needed thanks!

@reneouellette9934 4 года назад

Quick tip, leave the quick hitch on the ground, attach the top link first, use a block to prop up one end of the quick hitch, then attach the lower links starting with the end without the block.

@GoodWorksTractors 4 года назад

I was trying to get my workout in for the day! :)

@marke1951 2 года назад

Saw this comment about using a block when I was reviewing the video on how to attach… worked like a charm! I’m 70 and was doing it solo so it made the job easier for sure, thanks!

@larrypinkston7260 Год назад

This is a really informative video

@danmcgivern1345 2 года назад

Great video!

@ronnieg6358 4 года назад

There has been an 'A' frame quikh attach device available for several years .It has the advantage of self aligning and It comes in two parts one of which is attached to the impliiment.

@aaronbarkel4005 7 месяцев назад

Another great video! I looked in the video description but didn't see a link to the bushings. I purchased a random 2 pack set from Amazon for about $30, making them about $15 a set.

@jerrybishop8588 2 года назад

Tip : on the adjustment top link put some anti seize on the threads of the adjustable part keep it from rusting so be easy to adjust

@gulabkeerio4392 4 года назад

Very nice

@Quilustrucu Год назад

You could drop the quick hitch on its face on the ground and raise one leg at the time. Just a thought.

@belindakt 4 года назад

Excellent how to video! Where were you several years ago when we bought an i-match from John Deere? LoL it was much more expensive than this 1..... The top link adapter intrigues me, that looks like the perfect item for a few of our non-compatable implements. Very clever!

@GoodWorksTractors 4 года назад

Haha well the iMatch is a good one too!

@ryanm540 3 месяца назад

Wow, your videos are super detailed which is really awesome. I just subscribed because of it. I just bought a JD3039r and I’m more or less green so really have a lot to learn. You mentioned that nut on the center link getting tightened all the way down against the part of the center link that spins. I noticed you never did tighten it down to that though. Is that just because you were concentrating on the attachments? So, before you actually went off and used the brush hog you would’ve tightened that nut down? Thanks man, really precise video to teach us rookies!!

@donalddfd3105 4 года назад

Great video

@GoodWorksTractors 4 года назад

Thank you!

@waltbennett5503 4 года назад

Pat's works for me.

@ronwood3214 2 года назад

How wide is the opening that attaches to the draft arm I purchased a I match for a category 1 and 2 That’s to small for the draft arm ball about a 1/4 to small I was wondering if a lot of I match hitches have this problem?

@drewk5929 4 года назад

I’d get one of those quick hitches for my tiller problem is it’s off set not center so that wouldn’t work. Good video thanks

@DanielToffolo Год назад

I noticed the last attachment you picked up was on a pallet. Does it not work from the ground? I can’t get my imatch to go low enough to pick up a ballast box.

@DeereX748 4 года назад

From all appearances, it looks like the bushings could be installed with the large collar to the inside, and rather than have to use the roll pin to keep them in place, the large collar would do that. Then, use a thick washer with a keeper pin on the outside to keep the quick hitch hook from slipping off the hitch pin/bushing; OR.... simply redesign the bushing with a thinner collar on both ends. The quick hitch does not vary in width, so there would be no danger of the implement slipping off one side or the other. This way, the bushing is easily removable and can be used on many implements, rather than semi-permanently mounted to individual implements. This would accomplish two things: 1- you only need one set of bushings (although the manufacturer and dealer would love to sell you multiple sets), and 2- allows use of the implement in the normal way on a standard 3-point hitch that doesn't have a quick hitch in place. Just give the implement's pin a light coat of oil or grease to keep the bushing from rusting in place if left in the weather for long periods.

@GoodWorksTractors 4 года назад

Would be nice if they are quickly removable. I'm struggling to see how with this design though.

@chrisspence3216 4 года назад

I just bought colar bushings for all my implements makes it so easy and in the long run it’s cheaper 1. No bending over changing bushings helps your back and no cuts or nicks on hands . 2 . I can just pull up to all of my implements grab and go Time is money 💵 Priceless. 3. With Amazon , eBay , Tractor supply , harbor freight ya can find deals on bushings so cost is not that bad and they fit right. 4. no extra pins or washers to bend or loose and as we all know tractors love to eat pins and clips almost every other job they seem to eat one or two , cuts down on the amount pins to feed your tractor with the roll pinned bushings . And with a brush hog mower or a tiller or blade they jump around more than a box blade per say so seems a lil colar is a good thing IMHO I have a Landpride QuickHitch that came with my John Deere 3320 I bought it used so is what I Got and I gotta say I’m not a big fan I had to change the top hook for a different one to work on all my attachments was like it didn’t stick out far enough bought a few of them a lil trial and error but finally found one I think amazon that works great. So there’s a million combinations out there it comes down to what works for you there’s no right or wrong just I think it’s great we are all on our tractor getting it done boys !

@HyperPiperunscripted 4 года назад

@@chrisspence3216 so are you saying you just use the regular bushings with the d-ring pins wasn't quite following

@teddybaham6673 2 года назад

Just bought a 3043d, do you think I could run a MX 6? Lift cap is 2100lbs , cutter is 1100. 38 hp to the pto

@lunaflight7717 4 года назад

I got the same quick hitch on my 1969 ford 4000 loader tractor

@GoodWorksTractors 4 года назад

Nice!

@kals086 Год назад

I bought the SpeeCo Cat 1 E-Hitch Quick Hitch and it didn’t come with bushings. Should I have ordered them separately?

@BillyBlaze7 2 месяца назад

I didnt see a link to the adapter bushings on Amazon, did I miss something??

@bobpease6924 3 года назад

Just installed this hitch, then my finish mower, someone told me I will have to buy a new--longer PTO shaft, is that true?

@chris3m98 4 года назад

I have a LT 155 tractor, the mower deck is worn out & needs replacing do you have a source??? The sand has made the deck steel paper thin & some holes in it.

@GoodWorksTractors 4 года назад

I don't have a source unfortunately.

@mrmichaeltscott 2 года назад

What were they thinking. Speeco 2nd edition. Chevy orange. I have to go measure.

@cwolf8841 3 года назад

So the "floating top link" would replace the hook ...... and allow connecting a 4 weel finish mower to the Quick Hitch? I used a motorcycle jack to move the Quick Hitch into position for install.

@philliphall5198 Год назад

Would be nice to have working by yourself all the time

@mland4298 2 года назад

Not ever used one of these but am looking in to getting one. One question I have is, what keeps the top/center link connection from disengaging from the quick attach. Nothing there to hold it in place. For instance, pushing dirt or rocks with a blade turned backwards. Looks to me like that top/center connection would jump out?

@tayjadster Год назад

The bottom mechanism keeps the implement from lifting up which makes it impossible for the top link to pop out. However, if you have a mower or other implement with a floating or pivoting top link you have to swap out the top hook for the clevis style connector he showed at the beginning of the video. Although he had it backwards

@DeleteLawzsucks 3 года назад

Where is the link for the bushings?

@alltruckfleet 2 года назад

So if I put one of those on my JD 755, I can potentially use newer and greater variety of cat 1 attachments ? If so, where could I see a list of attachments that would work?

@rickyanke9407 2 месяца назад

Yes, this will make it easier. You may still need to do some adjustments to get the quick hitch, especially if you have implements from different companies, but it does increase your flexibility and easier overall to attach almost any implements.

@efdrsq107 Год назад

Lots of good info on your channel, please use the correct hammer, thanks!!!

@GoodWorksTractors Год назад

Just use what’s on hand, it gets the job done.

@dieselking6812 4 года назад

Is it possible to put a category 1 quick hitch on a category 0

@GoodWorksTractors 4 года назад

Good question, not sure of the answer.

@bradb4620 3 года назад

Do u have an Rt 3062 tillers. I can't get mine to work with my imatch. I think they sent the wrong side mounts

@GoodWorksTractors 3 года назад

No, I don't. Some of the mounts on the tillers are bolted so you can slide them left to right.

@bobwayne911 4 года назад

Y'all sure have lots of eye candy - just like looking at the Sears and Roebuck catalog when I was a kid. Lots of wishful thinking and no real Santa Claus,!! LOL - have a great day!!

@richardbarreau2844 4 года назад

wish you had extended your video and included more on the floating top link. What happens to the top arm on the three point hitch from the tractor? If you install as you implied in the video. It will not pick up the implement up without the top being attached to the tractor will it. Wouldn't the hitch just tip over toward the implement you are trying to pick up? I may not being understanding the floating top link correctly.

@GoodWorksTractors 4 года назад

Sorry for the confusion. I had it shown reverse. Was trying to keep the camera on it and didn't pay attention to orientation of the floating adapter. If you put the forked end towards the tractor, you can then attach it through the same pin as the quick hitch and tractor top link. Does that make more sense?

@aaronbarkel4005 7 месяцев назад

Fwiw, the floating top link installs towards the tractor, making it easier to connect the top link on the tractor to the quick attach as opposed to installing towards the implement.

@geneprice3189 4 года назад

Does it matter if u buy cat1 or cat2 bushings for attachments

@dirtyd9792 3 года назад

Cat 2 is normal size but still has slack/play in it. A cat3 will fit tighter.

@samuelhernandez9267 2 года назад

Would this cat 1 fit on my John Deere 2035e??

@GoodWorksTractors 2 года назад

Yes, I think you mean a 3025e? Or perhaps a 2305? Either way, it will fit both of those models.

@bobpease6924 3 года назад

Other than your attachment being sloppy, what happens if you don’t add the bushings?

@GoodWorksTractors 3 года назад

I would expect some attachments to fall right out of the quick hitch due to the excessive amount of play.

@bobpease6924 3 года назад

Thanks

@unclefuddelmer9224 3 года назад

You shouldn't have much more than 0.010" play in order to minimize wear n tear

@robertbailey8570 Год назад

HOW MUCH DO THEY COST

@TheKelmo2828 2 года назад

I just use my rake with a quick hitch with no bushing.... clink clank spank!

@jimsmith6816 Год назад

Rear forks will lift 1500 pounds for 250. Bucks. Cost per pound is cheap.

@jeffrey5537 Год назад

Floor jack..

@markschmaus5580 4 года назад

Hmmm.......

@SummertymeJamz 4 года назад

Bam - 1st

@GoodWorksTractors 4 года назад

😂 where ya at Mark?

@markschmaus5580 4 года назад

@@GoodWorksTractors im 2nd in command today !! Out on the mower....lol....WITH...my coffee

@markschmaus5580 4 года назад

@@GoodWorksTractors right here !!

@markschmaus5580 4 года назад

Look at u goo.....lol

@GoodWorksTractors 4 года назад

Haha! Stripe it up!

@crxess Год назад

The why is - they switched Manufacturers. The hitch is now exactly like the Harbor Freight Hitch. *I do hate when a Seller makes unsubstantiated claims without a side by side comparison. Again, this hitch you are demoing is EXACTLY comparable to the Harbor Freight Quick Hitch, in every way. Gusseting, weight and all.