How To Install Vertical Blinds | Sliding Glass Door

Подписаться 957 тыс.

Просмотров 112 тыс.

50% 1

SPAX Screws Used: homedepot.sjv.io/DDx05
Dewalt Bit Holder: amzn.to/3n8bnVe
I will walk you through the complete process for measuring, selecting, and installing vertical blinds for a sliding glass door. Additionally, I will review both inside and outside mounting options but will only demonstrate the install of an outside mount configuration. This is a very approachable project but it will be nice to have an extra set of hands while mounting the top rail as it can be a little hard to work with by yourself.
Tools Every Weekend Warrior Needs
Makita Corless Drill Combo Kit: amzn.to/2Jsw78j
Dewalt Drill Bit Set: amzn.to/2w0xAA4
Dewalt Screwdriver Bit Set: amzn.to/2UqTvK9
Craftsman Screwdriver Set: amzn.to/3bAsNEG
Eklind Allen Wrench Set: amzn.to/2wKDu8M
Pliers (4-Piece Set): amzn.to/2JlYUM7
Stanley Utility Knife: amzn.to/2Us2pqG
Stanley Tape Measure: amzn.to/2WPzr5K
Studbuddy Stud Finder: amzn.to/38MdzfV
Johnson Torpedo Level: amzn.to/3dzx5Ot
Stanley Hammer: amzn.to/39tudPL
Buck Bros Wood Chisel Set: amzn.to/2QTebYO
Klein Voltage Tester: amzn.to/2XMa1I2
Wire Strippers: amzn.to/2NHHKuS
Little Giant Ladder: amzn.to/2UrFmfG
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.

Хобби

Опубликовано:

3 янв 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@major_west Год назад

I've installed many blinds in the past, but still learned some new tricks from your video. The cabinet screws you suggested work great and saved me a lot of frustration, well worth the extra $10 for a box.

@jwilliam1542 2 года назад

Nice job with the instructions. You covered the most important aspects of getting the job done right. Thanks.

@prblakeslee 11 месяцев назад

Thank You. I really like how you described the wood framing detail for your door. Also the screws tip was great.

@phelpsomg5449 18 дней назад

Great job one of if not the best how to video I hve ever seen and oh wow the screws advise....Game changer!!

@MercenaryJack2187 3 года назад

Way cool content, doing some home repairs and grateful to have found this channel, very useful information.

@EverydayHomeRepairs 3 года назад

Awesome, glad I could help 👍

@Don_D_Don Год назад

Literally just the video I needed. Thanks so much

@rickmacdougall8253 3 года назад

Thanks. The info on the header and screws was big.

@EverydayHomeRepairs 3 года назад

Hey Rick, yeah makes things much easier not having to hit studs to get a secure hold. Those SPAX screws are way easier to work with on this and many other projects. Best of luck on your projects!

@Ledfether Год назад

Good video, thanks. Probably the most important parts of this is knowing there should be wood behind the drywall at the bracket mounting height. I you have a laser, you can stripe the wall level and preinstall your brackets without going up and down with the head rail. Also, an 8 foot straightedge with a 4 foot level on top can set you a level line to avoid all the up and down with the head rail. Most sliding glass doors are less than 8 feet wide. If you cant find those installation screws, hex head installation screws are also very effective. And finally, always invest in Fat Max tape measures. Always. All professionals should be carrying them. They are the best for measuring stuff by yourself.

@43SunSon Год назад

I’m new, how do I know there is a wood behind the drywall ?

@SimplyRedVirginia Год назад

I want to add that replacing the Levolor track with a new Levolor track was a direct switch-out for the actual individual vertical blinds. I was able to use the old actual individual hanging blinds, saving money. I was also wary of the new mechanism to open and close both the length of the hanging blinds, but also the closing of the blinds once they are pulled all the way across the door. The old track has little ropes you pulled to slide the blinds open and closed and a wand to twist the blinds closed for privacy. The new mechanism only uses a wand to do everything. I was concerned that would be the weak link, but 6 months later we actually like using the wand to drag the blinds right and left. It's so much easier. But we are also careful not to put weird angles of pressure on the wand which may weaken the connection point.

@garrydenny5405 2 года назад

Love the Spax screw tip because so many screws in kits strip so easily. Unfortunately, Home Depot doesn't have available in store or online.

@bethkaplan547 Год назад

On my window I cant get the screws all the way in! It happened on both an inside and an outside mount even when I drilled a hole first. It seems like I am hitting metal or concrete. Edit: I went and bought some new screws (power pro one ext xl #8 1 1/4" as recommended by the guy at lowes-I think similar to ones in video)and it was so easy! I didn't even have to drill holes. I also got the level (good thing I did!). Now my blinds are hung and I'm very happy! Thanks for the advice.

@pageruch5942 10 месяцев назад

I don’t understand why you didn’t go all the way to the end!

@Grimalken1969 2 года назад

Great instruction video. I also want to do an outside mount, because I just installed a new patio door, and I really do not want to drill holes in the nice new wood.

@EverydayHomeRepairs 2 года назад

Thanks and best of luck on your project!

@viv2419 Год назад

I'm soooooooo glad theirs videos like these for us DIY's. Cuz my Landlord, I'll jus lv it at that. Lol. Thank u

@SC-vs9wx 2 года назад

Great info and instructions! Question: If my window don't have enough depth/indent, 1.5 " only, will I still be able to install 2" inside mount blind? Thanks!

@renesoto2567 Год назад

Great guidance. I am planning to install a 104" L blinds on sliding doors but realize I have an issue. I can't do in or outside mount since sliding door is 96" from floor to ceiling. I do not have that stud room for the installation of the brackets. I assume I have to do ceiling install which is kind of unique. Correct me if I am wrong but I'm thinking I would just need to screw the mounting clip to the ceiling, or should I just use the whole thing? Bracket and clip but the upper part to the ceiling. Thanks for assistance with this.

@brucemaine5425 2 года назад

I’m re-installing vertical blinds with a new mount….my old vertical blinds are 82 3/8 “ in length….what height should I install the brackets and how much space will I have between the floor and blinds? Thank you!

@georgedavall9449 3 года назад

Hey Scott, I’ll build a house from ground up, but I avoid these ‘things’ at all costs! 😳🤔🙄 Seriously, some good points and demonstrations and information. 👍👍👍😁✌🏻✌🏻✌🏻🇺🇸

@EverydayHomeRepairs 3 года назад

Hey George, thanks! Interested if you had a project with a sliding glass door is there any other product you would use to adjust light / provide privacy? Vertical blinds aren’t my favorite either but I currently I don’t have a good alternative.

@georgedavall9449 3 года назад

@@EverydayHomeRepairs Scott, only other thing I could think of would be full length curtains, which would open up with a side pull, or some may still open up from both sides? They offer full privacy and light control, but not as easy to clean, nor as sleek as the vertical ones you used here. 🤔🤷🏻‍♂️🙄 I haven’t had sliding glass doors for years, so not much help to you? ✌🏻👍

@EverydayHomeRepairs 3 года назад

Got it, appreciate the feedback as always. Take care. 👍

@judymaass9526 2 года назад

I don't have brackets. I salvaged the blinds from a camper to put in our camper. Where can I buy brackets? And, thank you for the great instructions

@United_Corporations_of_America 2 года назад

What do you do with the wall anchors?

@mudmessiah 6 месяцев назад

If you’re going to have two different mounting videos in one. Please make two videos. I’m come looking for an inside mount replacement.

@tricolor112010 Год назад

Excellent job. My question is if I don’t have a stud in the back how do I secure the brackets to the drywall securely?

@EverydayHomeRepairs Год назад

Hmmm, I would think there is a "header" over a large opening giving you something to drill into without the need for anchors. If you do need anchors these are my Go To amzn.to/3dkqUm7

@augustuswhite6838 2 года назад

Where can I find the spax screws, because home depot doesn't have them. Suggestion for substitute or where else to find the screws, because I can't use the screws that come with it, and I can' t finish my project

@juditzubor2302 Год назад

Would the spax #8 1 1/14 screws work? Or the #8 2? The size you recommend is out of stock everywhere i looked

@trevorhuth1061 2 года назад

Does the header go wall to wall?

@TMP10 3 года назад

How far above the molding do you go? I am doing the same job and I am trying to figure out what I need to measure. The high of my sliding doors is about 80 inches and about 82 if I include the molding.

@EverydayHomeRepairs 3 года назад

I just measured from the floor ensuring I had 1/2" clearance so the slats wouldn't drag on the floor when opening the blinds. So it is less about the molding and more about the distance from floor. Best of luck on the project.

@StayPositive-sd8op Год назад

I can't get the top thing that holds the top bar where the bar is suppose to clip in but mine won't snap in place

@marystrong3371 Год назад

I just had a fella install 2" faux wood blinds. They stick out of the trim about an inch on the front. Does this mean he didn't put they back far enough?

@85akmalh 9 месяцев назад

Hi I need to install roller blinds into a recess which has a sliding door in the middle what I have encountered in the process is the sliding door has a bar sticking out which will damage the blind while sliding so what are my options to get this done

@HShaw33 3 года назад

After the blinds are installed, do they slide easily so you can open the sliding door?

@EverydayHomeRepairs 3 года назад

Yeah, The quality of the blinds weren't great but they served the purpose and could easily be slid to the side.

@bahmanbaghai 6 месяцев назад

Hello, What if we have a wide wide window and can not find that blind size in the market? should we install two blinds adjusent?

@patriciacollins1141 2 месяца назад

When you get started with and you cut the rail to where you want it. How do you know how many pieces of the blind go up. We did this once and there was to many pieces of blinds and they over lapped on one end. Is there a way to figure this out?

@vaishalipatel9668 Год назад

Where do you get the verticals blinds..Home Depot?

@Thepaleone64 2 года назад

Thanks for the clear instructions. I have vertical blinds on the sliding door in the home I'm renting. It's an outside mount. I'm wanting to replace them and I'm wondering if I can use the existing hardware that the old ones are mounted with on the new ones. Are mounts universal or does each brand use different mounts?

@Ledfether Год назад

When you get your blinds home, check the brackets inside the box against the ones you already have on the wall. You should be able to determine if you can use the old ones pretty easily. Most of them have a slot to adjust the blinds closer or further away form the wall/trim and a separate piece that clips on the blind's head rail that is what moves in or out making that adjustment. You may be able to use the old brackets on the wall with the new parts that clip on the head rail.

@lattishajustice8905 2 года назад

Can you buy just the header materials? I would prefer to use curtains since I have kids and don't want them to destroy the blinds.

@dannyschaefer5560 3 года назад

When you sized for inside mount you didn't compensate for the device. The part that holds the slats. 1.5-2 inches

@EverydayHomeRepairs 3 года назад

Hey Danny, thanks for the call out 👍

@carsonkrenz3622 Год назад

Helpful but please people, do not be cheap and come up short on the length of your outside mount. That gap at the end is not only aesthetically atrocious, it defeats the purpose of the blind. Especially if it was a blackout…ish.

@sozmaz4500 Год назад

OMG your eyes ❤ !!!

@wfjr997 Год назад

He did show how to mount the rail at all. It just all of a sudden what’s up.

@Sketchloc 10 месяцев назад

You completely skipped the one part that i needed help with from putting mounts up then putting the frame in and attaching it

@acwright 3 года назад

You appear tall.

@EverydayHomeRepairs 3 года назад

😂might have a little boost for that picture.

@MrGunnar1986 4 месяца назад

It's not even fully covering the door

@thebigdoghimself 3 года назад

Those bñinds do not properly fit that window. 1. The blind should completly cover the window. 2. The blind should extend beyond the window so that when you open it the full window is visible. In other words the open blind does not block part of tne window. That blind is a good 2 feet too narrow. If you are being cheap you should have installed 2 units that open to the opposite sides of the window. The right way to do it would have been to order a custom split opening rail that propely fit.

@EverydayHomeRepairs 3 года назад

Hey John, thanks for the feedback. I tried to make that clear by mentioning it several times in the video that these blinds were about 6 inches too short. In an ideal scenario I prefer only 2 inch overlap for each side on vertical blinds but appreciate your thoughts.

@georgedavall9449 3 года назад

You might check your spelling John, as it doesn’t properly fit your comment. 🤔 Scott explained and showed his personal choice of why he went with the size he did. Peace 🤔🙄😳😄😅😂✌🏻🤣

@thebigdoghimself 3 года назад

@@georgedavall9449 sorry, broke my hone a couple days ago and waiting on new one. Using an old blsckberry temporarkly, i had forgotten how hard it was to use this thing.

@briansschneider 3 года назад

Great info. Got donated verticals for our new house. I hope they have the hardware included. Now I know what to look for and how to install.Thank you!