How to Install Vinyl or Laminate Flooring Over Existing Ceramic Tile

Подписаться 14 тыс.

Просмотров 740 тыс.

50% 1

In this video we show you how to install vinyl flooring over existing ceramic tile in a home entrance and bathroom. For this project, the goal was to reuse the existing trim so that it would match seamlessly with the rest of the house. Laying vinyl or laminate flooring over existing tile is a great way to upgrade a floor space without getting into messy demolition work.
Make your life easy with these amazing tools on Amazon!
- Cordless Drill and Impact Driver Combo Kit: amzn.to/3DQLLaA
- Cordless Circular Saw: amzn.to/40CSWNi
- Compact Table Saw: amzn.to/3Ye6tJH
- Oscillating Multi-Tool: amzn.to/3RLumGa
- Rip Cut Circular Saw Guide: amzn.to/3DLittZ
- Deluxe Sliding Mitre Saw: amzn.to/3YxFOqZ
- Compressor and Brad Nailer Combo Kit: amzn.to/3XcWIKy
- Folding Work Bench: amzn.to/3lhVOz8
- 5-in-1 Stud Detector: amzn.to/3I6HqlY
- 30-foot Tape Measure: amzn.to/3IgHHTP
- 48-inch I-Beam Level: amzn.to/3YzDWhu
The video describes all of the tools needed for the installation.
Multi-angle ruler for complex cuts: amzn.to/3Y6sf22
Tips & Tricks:
- Create "tapping blocks" out of a piece of flooring to use with your mallet so you don't damage the surface or edges of your new floor
- Investing in a "pull bar" can save time and help with tricky sections during installation.
- For installations over existing ceramic tile, make sure your tile is in good condition. Broken, loose or damaged tiles will not make a good foundation for the new floor.
- Leave a small gap between your new flooring and the wall to allow for expansion. This gap should be small enough to be covered by the trim.
- Make sure your work area is as clean as possible before you start laying floor.
SUBSCRIBE and turn on Notifications so you don't miss any upcoming videos!
Amazon links are affiliated. If you click on it and make a purchase, the channel may earn a small commission. It doesn't cost you anything and helps support the channel. Thank you for your support!

Хобби

Опубликовано:

19 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 426

@DIYDudes 3 года назад

Check out the closet renovation video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XNXITrqm1sA.html

@ish-shamelwilliams2516 2 года назад

This is exactly what I needed. The video was well laid out. Gave me the confidence to try this soon. Thank you👍🏾

@DIYDudes 2 года назад

Glad we could help. Good luck!

@hanzohattorri2471 Год назад

Thank you so much for this video!!! I didn’t want to remove our existing tiles in our bathroom. This is very detailed so I will follow your suggestions.

@DIYDudes Год назад

Thank you !

@lucyw.mcmellan7274 2 года назад

This is exactly what I plan on doing in my bathroom update. Very well demonstrated and explained. Thank you very much. 👍🏼

@DIYDudes 2 года назад

Glad you liked it!

@just_shaeee Год назад

How did it go?

@tinablair6262 Год назад

@@DIYDudes the other videos i watched fill the grout lines. Why didn't you fill the grout lines first?

@zaneblane8160 Год назад

@@tinablair6262 ..same question here..

@fredaapinko6160 Месяц назад

Me too

@karend.9218 2 года назад

I’m 1:25 in and I can tell these guys are good at their work. Game recognize game.

@DIYDudes 2 года назад

Thanks for the compliment!

@pamellaarias 2 года назад

This is the perfect how-to video. It’s easy to follow, clear and precise, and the handsome hosts are a bonus gem!

@DIYDudes 2 года назад

Thank you!

@stevesharp3813 3 года назад

Nice job. Clear and simple instructions! thanks

@nothingbutthebest3051 3 года назад

Thank you!

@katerinalallouet2874 3 года назад

Great work! Looking forward to part 2

@mzwisdom7504 3 года назад

Thank you. This idea just came to me. I did not want the mess of digging up tiles in a lived in house.

@nothingbutthebest3051 3 года назад

Yes it’s less mess and speeds up the renovation process a lot as well. Good luck and thanks for watching!

@mzwisdom7504 3 года назад

@@nothingbutthebest3051 should we use backing on the concert flooring?

@nothingbutthebest3051 3 года назад

@@mzwisdom7504 do you mean underlayment under the vinyl planks? If so check the recommendations for your flooring but likely yes, ours had a quality one built in and the manufacturer actually recommended not using an underlayment so we didn’t

@mzwisdom7504 3 года назад

@@nothingbutthebest3051Yes that's what my term meant. We will make a inquiry before installing the vinyl planks. Thanks

@sharonsue441 3 года назад

I sure wish I could get you two to do my villa floor!! (Sebring Fl.) I will now be searching for a company to HOPEFULLY be as good as you two are!!!

@nothingbutthebest3051 3 года назад

Good luck and thank you !

@upulaherath7204 3 года назад

Crystal clear man, so good, peace! ✌️

@nothingbutthebest3051 3 года назад

Thanks Glad you liked it!

@lydiakotak181 3 года назад

Thanks , you make it look simple!

@DIYDudes 3 года назад

Thanks for watching!

@michellethomas6557 3 года назад

I've installed floor before but there were some great tips in here. Thank you

@rbs1521 3 года назад

Glad we could help, thanks!

@ANTHONY-rp3ud 3 года назад

amazing job guys!! now i need you two to do my bedroom!! lol

@rbs1521 3 года назад

Thanks, cheer!

@keithhicks3358 2 года назад

Great job 👏🏽. Thanks 🙏🏽 for sharing . This is a great idea 💡.

@DIYDudes 2 года назад

Thank you!

@classiseverything2me 3 года назад

Excellent work!!!

@DIYDudes 3 года назад

Thank you! Cheers!

@VeesFunkyAZZshop 9 месяцев назад

you make it look and sound so easy, but in reality one really needs to know what they are doing to avoid mistakes that could cause further damage and issues. speaking from wisdom.

@user-ss9qh8kv4d Месяц назад

Well, every rehab job has its own possible problems but this is true to laying laminate. Nice work. I’m about to lay laminate ver tile and am wondering how the laminate has held up as far as the valleys between the original tiles…. Does the laminate have issues with furniture/seems, etc.?

@juliananton7800 3 года назад

Loved the before tile 😂

@kyfarm 3 года назад

Really! And there wasn't a thing wrong with it. :)

@neilmurphy3239 Год назад

Good job lads lots going on there with different areas fitting wise looks nice 👍

@DIYDudes Год назад

Thank you they are still holding up great

@kiayang1992 3 года назад

Your video is exactly what I plan on doing to my newly purchased home! Some other videos recommended using underlayment even if the vinyl planks already have an underlayment attached. The additional layer would be to reduce noise since the pre-attached underlayment is usually garbage (their words, not mine). Would you recommend using additional underlayment or do you find it not needed since you're already laying it on top of tile?

@DIYDudes 3 года назад

Hey. I think it really comes down to the type of flooring you purchase. The product we used was quite thick and the bottom layer's made from a durable rubber material, so we didn't feel that any additional underlayment was needed. The floor is still looking good and there are no issues with unwanted noises or anything like that.

@kiayang1992 3 года назад

Thanks for replying! That's good to know.

@eksplorer668 2 года назад

Smooth and perfect..

@DIYDudes 2 года назад

Thanks!

@xKris93 2 года назад

Man that was satisfying to watch

@DIYDudes 2 года назад

Thank you!

@kellyrace4264 7 месяцев назад

Looks amazing

@DIYDudes 7 месяцев назад

Thank you!

@enriquevalladares5071 3 года назад

Profesional work

@DIYDudes 3 года назад

Thank you!

@georgycolson9671 2 года назад

looks gorgeous~

@DIYDudes 2 года назад

Thanks!

@katz103 Год назад

Thanks! Great information!

@DIYDudes Год назад

Thank you!

@ShahilaToronto 2 года назад

Amazing..great job

@DIYDudes 2 года назад

Thanks!

@liverbird46 2 года назад

Excellent job. 👍

@DIYDudes 2 года назад

Thank you!

@yususfsayanisayani8579 3 года назад

Great job good way to Explain thank you gays

@nothingbutthebest3051 3 года назад

Glad you enjoyed it!

@peterparker7488 2 года назад

*gayz

@wandakowalski7063 2 года назад

Great video! It would have been nice to learn what kind of tile you used!

@DIYDudes 2 года назад

Thank you… they were a life proof brand purchased at Home Depot

@klinemiceli2838 2 года назад

Great video and job...👍

@DIYDudes 2 года назад

Thank you!

@mitchelblaser5232 3 года назад

Awesome video! I am actually installing the same vinyl tile. I was wondering if I have to cut one side of the line when using the miter saw. I am thinking that if I cut exactly in the middle, the thickness of the saw blade will make the cuts slightly less that exactly half. Thank you!

@nothingbutthebest3051 3 года назад

We just cut it right in the middle, we had 1/8” split between two pieces so 1/16” off of each half. The amount is so minor you can’t even tell, good luck!

@nothingbutthebest3051 3 года назад

1/8” being the width of the saw blade

@lindadavis3098 2 года назад

Beautiful? Great job

@DIYDudes 2 года назад

Thank you!

@arper2000 2 года назад

Great job Boy’s 👍👍👍👍

@DIYDudes 2 года назад

Thanks!

@mattbablitch1456 2 года назад

Nice tutorial. I've been considering getting a multi angle guide tool. I'm sold now. My question is: Did you have to cut the locking bead off of the piece you slid into place when wrapping the door jamb? I noticed that you slid it into place with no lifting to lock the joint. Also, what do you use for straight cuts? Thanks.

@DIYDudes 2 года назад

No don’t cut the locking joint. Once it’s locked in on the long side you can slide it if your careful and don’t tap it to hard. For the straight cuts I just used the settings on the mitre saw. The angle tool is great though and cheap. I use it all The time for those weird cuts. Good luck!

@davidhanda4130 3 года назад

Good video

@DIYDudes 3 года назад

Glad you enjoyed

@edengills6609 8 месяцев назад

I love this flooring! Could you share the brand and where you got it from please ?

@tkash1988 Год назад

I noticed you did not use anything to level the floor (Ardex, etc.). How do you ensure the underlying grout lines won't become indentations in the LVP?

@DIYDudes Год назад

Our flooring was pretty rigid, so it wasn’t an issue… I’ve done it with thinner floors as well and hasn’t been an issue

@aimanharith1248 2 года назад

Good video 👍🏻👍🏻

@DIYDudes 2 года назад

Thanks!

@wendywendy6270 2 года назад

Ecelent idea 💡🤔👌😄♥

@DIYDudes 2 года назад

Thank you!

@fmb5384 2 года назад

Great video! I'd love to do the same, but we have got underfloor heating under the existing tiles. Do you think I can still do the same without losing the underfloor heating functions?

@DIYDudes 2 года назад

Thank you. Yeah I don’t think it’s a good idea to do this over heated tiles

@theresad1904 2 года назад

Just found this and I’m so excited so my big living area is all rectangular tile can I still use this method in a bigger area? Will the grout gaps mess with the new floor?

@DIYDudes 2 года назад

No they haven’t. We used a really stuff flooring. It might be a problem with the really thin flimsy stuff. If your worried you can fill them in with a mortar skim coat

@brettcrock 2 года назад

A few suggestions.... Use a trim bar, not a pry bar. Also, pre tape the end of your trim bar and pry side to side and not back and forth . Also, a large putty knife or dry wall float up against the surface of the wall so that when you pry the trim off, you won't damage your dry wall and put holes and dents in it.

@DIYDudes Год назад

Thank you

@damionwaller3176 2 года назад

freakin' Awesome dudes!!!!

@DIYDudes 2 года назад

Thanks!

@cspa11 2 года назад

Great video! was wondering if altering the height of the floor around the toilet flange is a cause for concern since the flange usually sits the floor level.

@DIYDudes 2 года назад

Thanks! It definitely is something to take into account but really depends on the height of your existing flange… if you your flange sits low compared to the new floor height you can get a thicker gasket or as a last resort a sleeve for the flange to raise it slightly Usually a new wax ring would do the job fine if your only raising it a 1/2” or so

@cspa11 2 года назад

@@DIYDudes awesome, thanks. Keep up the good work. Sub’d

@lucyw.mcmellan7274 2 года назад

@@DIYDudes That was also my concern. Thanks.

@samirasfar7803 2 года назад

Thank you so much for your video, my question what about the tile level,

@DIYDudes 2 года назад

Tiles need to be level. Thanks for watching!

@brettcrock 2 года назад

Also. Try and start and end your runs with larger pieces. You can do this by laying out a dry run or simply measuring and subtracting length off the longer beginning or end piece to even it out. It looks very professional and can make a huge difference.

@nodrama490 Год назад

I’m about to to lay down vinyl flooring and that’s a great tip thank you

@DIYDudes Год назад

I agree

@maryocecilyo3372 2 года назад

Obrigado!

@DIYDudes 2 года назад

De nada!

@richardbolton1461 3 года назад

Great video. How “deep” are the grout lines on the existing floor? I’m looking to do bathroom and have a similar existing floor. Are there any issues w the grout lines?

@DIYDudes 3 года назад

Hey, glad you liked the video! A typical grout line shouldn't have any impact as long as it’s installed correctly and recessed below or flush with the existing tile. A small gap like a grout line isn’t really enough to have your floor considered not supported. That said, if you did have an unsupported floor you could get some noticeable bending or bouncing in the floor. If you needed to fill a small gap or other hole in the the floor you can use a cement based self levelling floor product. For our project, the grout lines were standard (recessed) and the existing tiles were in good condition. Overall the new floor is performing well without any noticeable bending, bouncing or other issues.

@richardbolton1461 3 года назад

@@DIYDudes Thanks for getting back to me, very much appreciated.

@DIYDudes 3 года назад

@@richardbolton1461 No problem... good luck with your project!

@steverichardson4793 3 года назад

Hello, I had the same question : ) So no problem with a typical grout line, that's good point. Could it be bad after a time thought (months or years later ?)

@justinthomas8451 2 года назад

@@steverichardson4793 yes it will be a problem after time. I would put self leveling compound over the tile. Otherwise you will most likely void manufacturers warranty on the product and will have issues later

@anthonycordisco918 3 года назад

Can you recommend a product going over existing tile for a bathroom at a beach house (high humidity)

@nothingbutthebest3051 3 года назад

Anything that’s advertised as water proof or luxury vinyl plank would be best. Water proof is best any thing advertised as water resistant will still swell at the joints as those floors have a wood material core

@deanabossio3091 6 месяцев назад

Looks very nice. Just curious as to why no use of adhesive? Thank you!

@DIYDudes 6 месяцев назад

It’s a floating floor so it’s designed to be able to move (expand and contract slightly with temperatures). Glue would stop it from moving and the joints would separate over time

@paulstephens9274 Год назад

Guys - old GC here did lousy job with 2x4” tiling my backsplash having major lippage. Will try Prism grouting in to see if helps otherwise need cover. Thought of Venetian texture or micro cement overlay. Or do what y’all be doing with vinyl. Have a sheet to use or could get Traffic master 12x24”peel&stick VT and do a skip trowel texture over Thoughts?

@ElieAbouzeid 9 месяцев назад

Is there a need to put any underlayment between the ceramic tiles and the vinyl? Maybe for humidity?

@giannascarpelli7256 2 года назад

We are doing this in our bathroom. What do you recommend doing about the tile that meets up next to the tub? Leaving a 1/4 inch will leave a gap and instructions say to use this compressible foam and a silicone sealer over it to waterproof so how would you cover this without looking terrible?

@DIYDudes 2 года назад

Leave a 1/4” gap install piece of pvc quarter round trim to cover the gap (pvc won’t mold like wood) and silicone the edges to prevent water getting under. If done this before and it looks great

@jasa31 Год назад

This is great , a question please what is the floor tile is not even . what can one do . or is it ok to just lay out the planks ?

@DIYDudes Год назад

If the tile is not even you will need to make it even by removing select tiles or evening out with mortar It depends how bad the change in height is

@ronvasquez8270 2 года назад

Hey great video! I want to install LVP in my kitchen and family room (Great room). But kitchen is tile and family room is carpet (Removing carpet) how can this be done properly? Thanks!

@DIYDudes 2 года назад

Thanks for watching, your biggest issue will be the height of the plywood under the carpet will be lower the top of the tile in the kitchen. You can either get an overlay ply wood to build the plywood up to the same height as the tile or you can add a height transition strip have a change in the flooring height…. I would prefer to have the floor all the same height

@firnatine67 2 года назад

Nice job! Question.......would you consider cutting the baseboard the same way to cut all of the door jams instead of completely removing the baseboard? Was considering doing this in my kitchen over ceramic tile but didn't want to remove the baseboard entirely. I planned on finishing it off with a quarter round molding. Thanks.

@DIYDudes 2 года назад

It’s possible but I think it would be a lot of work. I think you can get a special saw made for that… if you don’t want to remove the baseboards adding a quarter round or shoe moulding would be your easiest bet.

@dnorwood226 2 года назад

The saw that would be used for cutting the baseboard to a height that you can install just under it is called a jamb saw...it looks just like a circular saw just turned on its side ...the same saw cuts the jambs on the doors hence the name...lol...installing up to the baseboard (leave a 1/4" gap for expansion ) and then underneath the door jambs and adding 1/4 round would be faster as mentioned.

@Mel-mn9fq 22 дня назад

Great job guys. Weren’t you worried about the grout lines translating into the vinyl plank. Did you use a specific type of product to prevent this. Appreciate your advice. Thanks

@fredaapinko6160 Месяц назад

Nice,I am trying to put stick on tile on top of tile in bathroom and laundry area.hope I can do this instead of sand the floor down before installing stick on tile please

@DIYDudes 23 дня назад

Thanks for watching. Check the manufacturer’s recommendations on the tile… it might not stick to certain surfaces good luck!

@tonyizor 3 года назад

Love the look of those tiles..can you post a link here to them? Thank You!

@nothingbutthebest3051 3 года назад

Hey tony sorry but I can’t find them on the website, we got them from Home Depot. Hope that helps

@terence4427 9 месяцев назад

Nice video! Is the flooring VCT or LVT?

@mikesmith4156 11 месяцев назад

Good job fellas! I know it was 2 years ago but how did you guys secure the transition strip on the tile? I’m contemplating my approach at the moment, thank you!

@DIYDudes 11 месяцев назад

We actually didn’t have to in those case because the transition was on the wood. But else where I tried to pl the track to a concrete floor and that did not work. You have to drill through it he tile or concrete to mount it down. Good luck!

@mikesmith4156 11 месяцев назад

@@DIYDudes Thank you

@theredundancy 2 года назад

Everything that I've been researching and reviewing says that you need a 1/4" spacing. Looking at your video I can't determine if there was any spacing from the wall to the laminate tile for expansion. What are your thoughts on this?

@DIYDudes 2 года назад

I left a small gap but it becomes almost irrelevant when your crossing multiple tight locations such as the tight areas around door jams( you can’t really leave a gap there) and the area under the toilet where the floor is pinned by the Weight of the toilet. The floor type i selected was waterproof which had a very low expansion/contraction rate and it was acclimatized for several days. In short I’ve done a few of these floors and wasn’t overly worried about leaving a large gap

@brettcrock 2 года назад

Indeed you do! This applies alot more specifically in the Midwest where there a lot of clay in the soil and the earth shifts, therefore causing the house to shift and the walls shift into the planks and they can "buckle".. Also, if floating walls aren't present in the basement, and your "stud stacking" the walls from floor to floor, your walls and ceilings will Crack and further causing the floor to buckle because they are against the walls.

@necurrence1776 Год назад

I'm pretty sure the laminate will rattle without an underlayer of foil to even out the tiles. It's amazing how many "How to's" you can find these days that miss important topics. But good for you, you're making money even without knowing all these things.

@DIYDudes Год назад

Underlayment is built in to the tile and would be against manufacturers recommendations. The flooring has been installed for about two years and functions perfectly. Thanks for watching

@SirPrem8 2 года назад

I have a basement that has existing tiles. Some of the tiles are broken, they're not the thick ceramic types. But the cheaper thin home depot ones. I want to retire with the wood style vinyl tiles. Can I lay ot over my existing tiles? Also would I require some sort of glue? I noticed your tiles didn't have glue underneath? Great video btw, 🙏🏽♥️

@DIYDudes 2 года назад

Thanks for watching. If your concerned about your tiles breaking or continuing to break I would not law vinyl tiles over top as the floor will continue to crumble under the vinyl tiles and cause issues. Any vinyl or laminate flooring must be installed on a solid/level surface

@danielletabone7731 Год назад

I finally found a flooring I like after looking at samples from several companies but my son is telling me the 12mm is going to raise the floor too high off of my new tiled floors. I just built my house and hate the tile is the thicker laminate an issue?

@DIYDudes Год назад

No I don’t think so. I would just consider the trim tie ins and the changes in elevation to what ever floors it ties in ton

@sydneiwebb7186 2 года назад

This may be a dumb question, but do you normally replace the baseboards with the same ones you took down? Asking bc we have wooden baseboards and would want to reuse them.

@DIYDudes 2 года назад

In our case we did reuse them as well, just remove them carefully so they don’t break

@kaylahford323 2 года назад

Hi! Thanks for the video. Did you re use the same trim or get a new one?

@DIYDudes 2 года назад

We ended up reusing all of the trim… be careful when you remove it

@jonathanchan564 2 года назад

@@DIYDudes On that same note, did you also cut the trim down for the new height? I saw earlier in the video you did mark it but wasn't sure if you just reinstalled. Thanks!

@DIYDudes 2 года назад

I did have to cut abit off of a few sections where the floor intersected trim from the existing floor… I just used a table saw

@southeastcoastalphotography 2 года назад

I have a question about starting in the closet, why did you start there instead of in the foyer so that your half planks would be over there instead of a smaller piece where you actually see it all the time? I would think it would be make more sense to have the half pieces by the door just stylistically. Also I may be a little OCD so it might not bother most people. Thanks for the video I have hideous pink tile in my living areas and this makes doing something about it look doable.

@DIYDudes 2 года назад

The way the tongue and groove of the flooring joins together you need to start in a corner of the room and work your way across and over from there. Good luck!

@DavidSmith-tx3uu 2 года назад

Hi Guys - Great vid - Would this flooring work for a larger kitchen area?? TIA

@DIYDudes 2 года назад

Thank you! And yes definitely, we actually did the entry way/bath in the video but we also did the kitchen as well

@maleego19 2 года назад

And if my existing tile floor isn't completely level what would be a good way to fix that, and would using extra padding fix the squeaking sound?

@DIYDudes 2 года назад

Squeaking is probably from your sub floor separating from the floor joists. Padding won’t fix that. You can pour a second leveling cement over tile to level out the floor Good luck!

@jdmb03 10 месяцев назад

Always leave a 1/4" gap between tile and wall/fixture to allow for expansion.

@sholadalcampbell5073 3 года назад

Would there be concern for moisture developing underneath?

@nothingbutthebest3051 3 года назад

No shouldn’t be a problem unless there’s a flood.... the joints on this floor are water tight

@jainvikas8 3 года назад

Is it possible to lay a glue-down version of LVT on old ceramic tiles? After laying if there is damage can that be repairable easily?

@DIYDudes 3 года назад

Yes as long as the glue has a clean level Surface to adhere to. Thanks for watching!

@jainvikas8 3 года назад

@@DIYDudes Thanks, but will it damage old ceramic tiles, when repairing the glued LVT or is it better off using click LVT?

@junjiema4613 2 года назад

Do I need to do an underlayment? Would the seams from old tiles cause any issues?

@DIYDudes 2 года назад

They didn’t in our case, a normal depth grout joint is fine as long as you are using a rigid flooring… check your flooring manufacturer recommendations on the under layment

@brettcrock 2 года назад

Also. One absolute main point that isn't mentioned is that there warranties on these planks and depending on the thickness or "mil" size , and if the planks already have backing then you may or may not need "underlayment ". "Thin ply" , to smooth the subfloor is a required instruction to obtain the vinyl planks guarantee and or warranty if a problem should arise for any reason. Ultimately, it's much wiser to buy the good stuff with the backing so that you can avoid the "thin ply" . Infact, thin ply underlayment will VOID the warranty if the vinyl planks have this backing. If they don't have the backing, then NO THIN PLY UNDERLAYMENT WILL VOID THE WARRANTY. So read the box carefully before you make you decisions.

@trish10-in44 Год назад

Question, should you remove existing tiles if they appear raised in places? I am all for laying vinyl plank over my existing tiles, but I don't want a lump from the old tile below.

@DIYDudes Год назад

Hey Trish you definitely need to make sure that the surface is flat/level You can’t lay on top of an uneven surface

@christinedin8515 2 года назад

What about when your tiles are loose and not level bad job done ,do i rip them out or use self leveling compound first ?

@DIYDudes 2 года назад

Christine you need to remove any loose material and ensure the base is level and solid. Self leveller would do the trick Any changes in smoothness will probably cause the joints to open up if the floor isn’t perfectly smooth

@franciscoguzman881 2 года назад

I plan on doing vinyl over tile but I currently have carpet in the rooms but I also want to do vinyl in the rooms how do I make up for the added height of the tiles to transition into the rooms?

@DIYDudes 2 года назад

You would have to buy a transition strip to address the height change. You can find them at your local building supply store

@mesawolfpack Год назад

Question, can install wood laminate flooring over a previous grouted floor after lifting the ceramic tile. The grout is flat. Or do you get the grout removed, big job!

@DIYDudes Год назад

If the floor is level and solid you can lay on top of it. … if you e already removed the tile I would go ahead and remove the mortar bed as well

@311Hanel 3 года назад

Would it be a good idea to put those over tile on a backsplash?

@DIYDudes 3 года назад

You definitely could, I’ve never done it but it would probably look good, you would have to figure out something for the edge though

@rockymaivia787 2 года назад

Would Pergo void the warranty if I install their LVP or Laminate over my existing ceramic tiles? (someone in HD said few products aren’t intended to be installed on top of tiles) not sure on this yet

@DIYDudes 2 года назад

Thanks for watching you’d have to check with your manufacturer directly… don’t trust the hd guy

@lifepartner6489 2 года назад

What is this laminate that you used please I really like it !

@DIYDudes 2 года назад

The flooring was life proof flooring. I would definitely recommend it!

@veevee1482 2 года назад

Is their a certain thickness of the planks we need to install over tiles?

@DIYDudes 2 года назад

No not really, the thicker the better though as some of the very thin ones may depress over time if they are left unsupported at the grout joints

@306greeny 3 года назад

Hi there i’m planning to install vinyl plank in our home but i read that this type of flooring is toxic..is this true?thank you all the best..

@nothingbutthebest3051 3 года назад

I don’t think so.... with today’s safety standards I think you would be hard pressed to find toxic flooring materials... if you are concerned check with the manufacturers of the specific floor you are looking for

@Ed_Gein Год назад

so laying over the grout lines wont be a problem for stability? in a small bathroom 6x6 floor is it too difficult to use full size planks to move from therre into the adjacent bedroom?

@DIYDudes Год назад

No issue with stability. And the transition is ok between rooms. With the big planks. Good luck!

@ig0529 3 года назад

What about spacing for expansion? On the edges and up agains the walls?

@nothingbutthebest3051 3 года назад

Try and leave about 1/8” to 1/4” as per the manufacturers guidelines. The floor we used has a high vinyl content so expansion/contraction should be minimal Best practice to leave at least a small gap to accommodate expansion of adjacent materials

@thefmtt2452 3 года назад

I just noticed this as well. The only LVT Click that I know that requires minimal expansion is Stone or Resin Core and that is still recommended 2mm

@tgreenejams Год назад

When doing this, can the gap caused by the grout impact the integrity of the new vinyl tiles on top of it? Should a floor leveler be used to bring grout lines up to being flush with the ceramic tile or is this not necessary? Thanks!

@kevinbowers8463 Год назад

Also wondering this... thanks!

@DIYDudes Год назад

Hey guys if you have a rigid core flooring then I wouldn’t worry about it. If you are using the thin 2-4mm flooring than i would consider it if your grout gaps are big.

@AmatriceBand 2 года назад

A question. If the ceramic tile floor is not level , then it needs to be levelled for the LVP. Is Using self levelling concrete to do that ok ? Also is having an underlayment necessary under an LVP ?

@DIYDudes 2 года назад

definitely a self leveler is your best bet for leveling out the floor....... Regarding the underlayment check with your specific floor manufacturer but likely yes at the very least for sound dampening.... if there was no underlayment or no built in under layment the floor would be very loud to walk on.... good luck!

@Moriahcs1 3 года назад

The tile that was installed in my house isn't very level, not terribly uneven but enough that if I ran a chair across it it would catch in some places. Will that create issues for the vinyl installation? Also, the tile is large and fairly thick leading into carpeted rooms. If I install vinyl over the tile will it be too high to sit next to the carpet? The vinyl flooring is about 1/4 in thick. Thank you

@tannytate1 3 года назад

That's my worry with installing this too. I dread the thought of removing my old tile, but I'm thinking it will be too high once if I install the vinly. They didn't really touch base on this issue in the video. You said you had some uneven spots in yours for this you can use self leveler in those spots before you install.

@tannytate1 3 года назад

This guy explains how to transition from higher to lower or lower to higher pretty well. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_oTUB9EM3a8.html

@tannytate1 3 года назад

The last segment in the video he explains how to transition from something that really high.

@rbs1521 3 года назад

The off the shelf transition pieces usually cover a 1/4 drop pretty easily. I would check the manufacturers recommendations on the transition rail and if it won’t cover you may have to add a thin piece of trim to fill the gap at the bottom of the rail that’s not covered, thanks for watching and we’ll try and include some more details on this in the next video. Thanks!

@kathygarrett8536 3 года назад

Thank you for this video. ...I want to do this in my powder room...after watching you..I think I can do it...love the the flooring you used...exactly what I am looking for...do you know the brand....where can I find it?

@DIYDudes 3 года назад

Hey Kathy, I believe it was a life proof brand from Home Depot. Make sure to get 100% waterproof (not just water resistant)

@allenmundia 3 года назад

Please include all the tools and vinly flooring you use in this video. I would like to build my washroom same as yours

@FrshPrnc598 2 года назад

What would you recommend for putting vinyl over uneven tile?

@DIYDudes Год назад

Just a thin set mortar…. Sand the edges when it’s still moist with a wet sponge

@maleego19 2 года назад

Did the laminate that you used came with padding pre-installed?

@DIYDudes 2 года назад

Hey Gary yes our floor had a backing built in and the manufacturer recommended not using additional underpad… always follow the manufacturers recommendations.

@edgarestevez2074 Месяц назад

I'm thinking to do that, but .y question is I don't need to glue the vinyl tile to the existing ceramic tiles? Any answer is appreciated. Thanks

@DIYDudes Месяц назад

No, this type of flooring should never be glued, it’s meant to “float” meaning it can expand and contract with temperature changes. Check the manufacturer’s recommendations

@kellybryant6207 Год назад

Can this be done over existing laminate tile? I'd like to cover and update to a lighter faux wood instead of the dark faux wood that is there now..

@DIYDudes Год назад

Yes definitely could. It is very easy to remove existing laminate though. It’s a bit more work but you might be better off.

@markmiller3210 Год назад

Can someone help answer this: We are installing almost identical plank flooring (8mm thick) in our mud room over existing hard tile. The tile currently buts up evenly with existing hardwood floors at the transition zone into the kitchen. What do I do at the transition zone as the newly installed plank flooring will now be 8mm higher than the existing hardwood floors. Any recommendations? Thanks

@DIYDudes Год назад

Yes you can get a transition to step down the height at the edge…. Just make sure the flooring you are using has available matching transitions.

@JazzieGirlful 2 месяца назад

How did you get the pedestal sink to fit with the raised floor height?

@DIYDudes Месяц назад

We just raised the sink it was pretty easy. Thanks for watching. !

@mmmmkay4773 3 года назад

I did this to my kitchen but I noticed in just a few weeks the black sticky backing comes up thru the cracks and sticks to the floors. It starts to look like random scuff marks. Should I seal the cracks in the vinyl sticky tile?

@nothingbutthebest3051 3 года назад

Hey sorry I think you are talking about a different material than we used so I’m not sure. Good luck!