How to level your rifle scope

Подписаться 465 тыс.

Просмотров 65 тыс.

50% 1

If looking for more info than on the channel or making suggestions, consider becoming a 4AW Club Member, be part of our team......
Club Member support link.
4aw-store.myshopify.com/colle...
Magnum Club Member link
4aw-store.myshopify.com/colle...
setting parallax video • The importance of sett...
MarkandSam Afterwork contact email...info@4aw.com.au
Our Paypal email: marksworkshop@westnet.com.au
Looking for one of our videos, check the new index section on our website: 4aw.com.au
if your looking for our Adjustable Bag bases go to this BASES link
4aw-store.myshopify.com/colle...
and if you looking for our Muzzle brakes, go to this link
4aw-store.myshopify.com/colle...
Channel Rules:
Here on 4AW we try to answer/acknowledge/thank all the comments, thank you.
That said, not all are equal, Supporters (financial) and Customers get preferential treatment, go figure!
Supporters/Customers: we try to answer all questions that are applicable to videos and will even offer links to help answer questions if appropriate to the channel
We would still ask you do as much searching on the channel as you can as our time is limited.
If you are a customer that uses a different name then let us know so we can make sure your comments are treated appropriately.
Other Commenters: once again we try to answer all questions that are applicable to videos, but we do not offer extra info or links.
If questions are not related to the video, your comment may not be answered or may be removed.
We would ask you do as much searching on the channel as you can as our time is limited.
Any rude or inappropriate comments will be removed or banned
If you have been banned (your comments don't slow up) and you feel unfairly, email us and we will review, Cheers

Опубликовано:

8 янв 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 127

@paulmatthews2035 Год назад

One point to consider is the actual bubble levels, I bought a set of 3 from a well known on line retailer only to find that when placed side by side on a flat surface they all indicated different. To check the level, place it on a flat stable surface and note the bubble position, now rotate the level 180 degrees, the bubble should indicate the same, if not, file said level in the round filing cabinet on the floor! Thanks Mark, once again clear concise information. Keep up the good work!

@markandsamafterwork Год назад

Cheers

@DevilsInBaggyPants1941 6 месяцев назад

My opinion is work on the level if you know you have a flat and level surface, in the future you can now depend on the level, we're all oak men of capable things, use what you have.

@Hill_Billy_Without_A_Hill 3 года назад

I figure my eye relief and make pencil marks on scope where the rings sit. Then I have my marks for when I level.

@markandsamafterwork 3 года назад

Good method, Cheers

@matthewtracy8744 3 года назад

Levels are a really good piece of equipment both at the bench and in your gear bag. And a level scope is imperative to being accurate! Good video Mark.

@markandsamafterwork 3 года назад

Cheers Matt, thanks

@adaboy4z 3 года назад

Putting a bubble level on my scope helped my accuracy. I had no idea how much I was canted when I shot.

@markandsamafterwork 3 года назад

Yeh, sure can, Cheers

@mikerayle6103 2 года назад

I'm becoming more and more updated on mounting a scope as I was never taught. And never heard of the plumb Bob idea as long as your gun is level. Great tip. 👍

@timbow50 3 года назад

I have been amazed over the years at the number of people I have seen "eyeball their level" and tighten the bolts. And the number of people having no idea about the leveling of the rifle to begin with. These informative videos hopefully will help those in need? lol I'm passing you along to some people I know need this. 👍👍👍👍

@markandsamafterwork 3 года назад

Thanks Tim, Cheers

@princebutterofknob19 Год назад

Love everyting you guys do. Incredible shots. And you show how you do it? You guys are the best of the best. Hands down.

@markandsamafterwork Год назад

Thanks Man, glad you like, cheers

@randyscott990 Год назад

Ultimately you want the vertical reticle to intersect the center of the rifle bore. Set a mirror at 12.5 yds, set your scope focus at 25 yards, loosen scope rings so scope can be rotated, look through scope into mirror and rotate scope until reticle passes through center of rifle bore. Now with gun on a good rest look through scope at a plumb line and move rifle to get plumb line parallel to vertical reticle line. Once that’s done add your clamp on bubble level accessory to the scope. When finished, scope, rifle bore and gravity are all playing nice. If you only shoot out to 300 yards or so, none of this is necessary unless you’re pretending you’re Chris Kyle or Carlos Hathcock.

@markandsamafterwork Год назад

Cheers Randy

@joshuagibson2520 Год назад

Bingo Randy. It matters nothing to be level to the stock. Or even scope rail for that matter. (Although the machining shouldn't be that far off or there are bigger problems.) Mechanically zeroing a scope and aligning the reticle to the bore is critical if you don't want to be off target long range.

@billy19461 3 года назад

The mechanic comes out in you when torquing them down.

@markandsamafterwork 3 года назад

Yep, Cheers

@2clicksup910 3 года назад

Good video. Everything explained simply and clearly. Well done. I use those sort of bubble levels; you get them with a new fridge or washing machine to level it.

@markandsamafterwork 3 года назад

Cheers Man, thanks

@kevinklepp9526 3 года назад

Wow awesome tips I never thought about using a plumb bob thank you for the great tips on setting up the scopes

@markandsamafterwork 3 года назад

Thanks Kevin, cheers

@Taepa5 3 месяца назад

I spent ages watching Silly Yank so called Military snipers and their complicated Methods levelling scopes even had online confrontations with them thanks for your simplified instruction knew I should have just kept to our Anzac roots

@markandsamafterwork 3 месяца назад

Lol, Cheers Man

@CyclopsJoeVideos 3 года назад

Great. Video as always

@markandsamafterwork 3 года назад

Thanks Joe, you would be one has leveled a few more than a fair share of scope in your time, glad you liked, Cheers

@nvkulk Год назад

Thanks you. So much! You helped me with my Daniel defense AR plus trijicon scope! Sorry about all the bans in Australia 😢

@markandsamafterwork Год назад

Cheers

@DanielBoone337 3 года назад

Great video as always keepem coming brother!!!!

@markandsamafterwork 3 года назад

Cheers

@malinkifox2011 Месяц назад

These bubble level blocks are a great idea. Thanks for the informative video sir

@markandsamafterwork Месяц назад

Cheers Man

@windrider65 3 года назад

Thank you for sharing this great information. Take care of yourself and your.

@markandsamafterwork 3 года назад

Thanks Man, Cheers

@col.cottonhill6655 3 года назад

"LOOK AT THE DAMN BUBBLE" -my father yelling at me while we would be at work land surveying. I had to keep the rod level using the bubble for those long laser measurements using a prism. It's pretty cool all the geometry and stuff that translates over into this hobby. Also makes me more interested in learning more about physics!

@markandsamafterwork 3 года назад

Lol, Cheers

@joshuagibson2520 Год назад

Most people don't understand how hard it is. It's not like a 2d bubble. You have to keep all 3D's level. Put the circle in the circle. I loved surveying when I did it.

@louiscapasso4452 3 года назад

Great information thanks for putting it out.

@markandsamafterwork 3 года назад

Cheers

@davidflanagan1653 3 года назад

Hello Mark, thanks' for some more handy information, stay well see you in the next vid.

@markandsamafterwork 3 года назад

Thanks Dave, Cheers

@EverydayPeople744 3 года назад

That’s cool, I use straight edges in that way with woodworking, never thought of it being used for gun work.

@markandsamafterwork 3 года назад

Cheers

@TimO-le7fi 11 месяцев назад

Great info Mark. A suggestion with regard to finding part of the scope that is level/true to reticle is to use the bottom of the scope turrent. It is the only surface guaranteed to be square to the reticle. All you need is a flat bracket approximately 2mm x 150mm x 40mm and a wide’ish rubber band. I use a small steel rule that is flat. Place bracket/rule flat with underside of turrent at right angles to scope and hold in place with rubber band. Then place bubble level on bracket. Simples:)

@markandsamafterwork 11 месяцев назад

Cheers

@xenomorph1317 4 месяца назад

Just like Mark said and what i do. The correct way to mount a scope period!

@markandsamafterwork 4 месяца назад

Thanks Man

@Armasafondo 3 года назад

Es una herramienta indispensable el nivel para ajustar tu mira. Is a great tool a level to adjust your scope. thanks for Share!!! 😀😀

@markandsamafterwork 3 года назад

Cheers

@johnventers5128 3 года назад

More usefull information. Thank you.

@markandsamafterwork 3 года назад

Cheers

@shanegibb997 3 года назад

Great video , been using the string on the bolt trick for a while now.

@markandsamafterwork 3 года назад

Cheers

@davidhandyman7571 3 года назад

An important principle when flying a plane; trust your instruments. It is far too easy to become disoriented. Even experienced pilots can be wrong. There are classic stories from World War II of planes being lost because pilots/navigators didn't trust their instruments. Excellent job again Mark.

@markandsamafterwork 3 года назад

Thanks Dave, glad you liked, Cheers

@12390erock Год назад

trust your military-grade instruments. maybe don't trust your ebay-grade instruments.

@Johnsormani Месяц назад

A quick check to confirm if your scope is level is to lift the butstock so you target tracks vertically along the center line. Considering that you can lock your bipod. Also, it isn’t always the case that the turret caps are level, so one should check this by turning the turret and checking in different positions

@markandsamafterwork Месяц назад

Cheers

@aussiesteveakastevecallagh2280 3 года назад

Hi Guys I set up my first scope the same as you Mark , I did that for my F class unit , I then using a plumb bob and level marked a set of crosshairs on the garage wall with a texta , I still use small bubble levels like yours to check the rifle is level but find the crosshairs on the wall saves a lot of messing around hanging a bob etc every time . All the best to you and Sam I hope 2021 is kind to you both Steve .

@markandsamafterwork 3 года назад

Hi Steve, all the best for 2021, Cheers

@Slipprymongoose 3 года назад

Pretty good explanation

@markandsamafterwork 3 года назад

Cheers

@crscott4548 2 месяца назад

The plumber bob trick is cool as long as you know the rifle is already level.

@markandsamafterwork 2 месяца назад

Thanks Man

@chrisgabbert658 2 года назад

My learning something today is the bob line 👍😊

@markandsamafterwork 2 года назад

Cheers

@mik1705 3 года назад

Good info as always! I have to force myself to trust the bubble level on my scope while shooting. It always "feels" off... guess I gotta change something in my setup so I can get "level" to feel natural! Thanks.

@markandsamafterwork 3 года назад

Yes I know the feeling, trust the bubble, lol, Cheers

@michaelreed1380 3 года назад

Mounting scopes, such an asinine procedure tightening the dang ring screws down. I really like the Spuhr mounts which have the built in leveling system to them, really makes things so much easier. Mount the scope using the leveling wedge and verify your reticle with a plumb bob. Super nice. Have you ever thought of using the "send it" level Mark? Not so much for leveling your scope but for shooting. Have a great day!

@markandsamafterwork 3 года назад

Yes, used them before, I prefer to simple bubble only, but they are good too, Cheers

@matthewharms7869 3 года назад

I learned of a technique of using the plumb bob but instead of looking through the scope use a flashlight to shine backwards through the scope to project the reticle onto the wall along with the plumb bob shadow. You have to focus the eyepiece out to bring the reticle in focus but it works well.

@markandsamafterwork 3 года назад

Yes another good method, Cheers

@matthewharms7869 3 года назад

Have a good one Mark and Sam cheers from Texas!

@markandsamafterwork 3 года назад

Cheers

@planeiron241 3 года назад

Greeeeeeat Vid

@markandsamafterwork 3 года назад

Cheers

@alejandrovidal1607 3 года назад

Hi form Argentina. i use a vary similar way, after level the rifle i put a flashligth in front of the scope and use the proyection of the reticle (in the wall) to align it with the plumb bob.

@markandsamafterwork 3 года назад

Yes that is a good way too, Cheers

@jaywhitney789 6 месяцев назад

Nice informative video matey 😎🔫

@markandsamafterwork 6 месяцев назад

Cheers

@jaywhitney789 6 месяцев назад

@@markandsamafterwork just ordered 2

@markandsamafterwork 6 месяцев назад

👍👍

@mk84ldb 9 месяцев назад

Sliding parallel between picatinny rail and flat machined surface under scope (usually beneath the adjustment knobs). Let parallel rotate scope into the same plane as the pic rail, tighten scope screws and recheck.

@markandsamafterwork 9 месяцев назад

Cheers

@Saurabh_Khatri Год назад

I just subbed and made 1k from 999

@markandsamafterwork Год назад

Awesome, Cheers

@KSHDJack 3 года назад

Similar to your plumb method, i like to level the action with the eye piece pointed toward a known vertical reference like a wall corner, door frame or window frame. I then shine a flash light into the objective and witness the shadow of the reticle projected on the wall. I find that this is easier for me to prevent bumping the scope or rifle before tightening. Do you see any downfall with my method?

@markandsamafterwork 3 года назад

That sounds good, just need to verify the straight bit with a spirit level first, Cheers

@kentrumm1385 3 года назад

Mark, do you ever verify scope level using the tall target test? Bryan Litz has a good video with reasoning on this. Great video Mark.

@markandsamafterwork 3 года назад

Not generally, but if you have doubts then it is a good way to test, Cheers

@2A.Freedom Год назад

Swampfox Arrowhead. After leveling with the reticle shadow on the wall lined up with a laser level, the bubble level on top turret was way off. Turning it changed the bubble significantly. So unless I'm mounting a 2k+ scope, I can't trust the turret. It's just not perpendicular with the reticle, and that's what matters.

@markandsamafterwork Год назад

Cheers

@wolverinekut 3 года назад

👍💯

@markandsamafterwork 3 года назад

Cheers

@slipknnnot 3 года назад

What are your thoughts on angle indicators and do you use them ?

@markandsamafterwork 3 года назад

We shoot ELR, generally not enough angle to adjust, Cheers

@timjames8503 3 года назад

Good evening Mark, very good video, I am wondering if you lap your rings in? I do, I have no test results of before and after, because I put the rings on and just start lapping them. After about 30 or 40 strokes, I clean them off and look at them.........99% of the time they make me sick to see how I could be torquing a very expensive scope!!

@markandsamafterwork 3 года назад

I check, if they need it, yes, FYI I normally use good monos, that don't need lapping, Cheers

@timjames8503 3 года назад

@@markandsamafterwork Thanks Mark, I used Leupold for awhile then I found the Blackhawk rings, they have 12 screws instead of the normal 8, but they need a lot of work to get them where I think they should be. Also they look great!

@billy19461 3 года назад

I saw the owner of a welding shop lose an argument with a framing square. Square is always right and a level is always right. Assuming that both are in good condition and have not been abused.

@markandsamafterwork 3 года назад

Too True, lol, Cheers

@Blackhorseveteran 3 года назад

Good video...that is ASSUMING...LOL the scope manufacturer has co-witnessed the reticle to the turret cap....and...that the base screws were drilled and tapped square to the bore axis. Lately, I dont trust, that has taken place....at least for most scopes I have experienced. I normally do the same set up, except..I shine a flashlight from the front of the scope to about 3 feet to the wall, and hang a plumb bob there. Unfortunately, I have found with various manufacturers, that the turret is not always square to the reticle...so..in the end, I always trust my eyes, and the reticle has to look good to me when I shoulder(or bench rest) the rifle.

@markandsamafterwork 3 года назад

Yes as explained, if uncertain, check and find if the reticle is straight, Cheers

@Blackhorseveteran 3 года назад

Edited my comment. Felt like I was tooting my own horn. Great video !!

@markandsamafterwork 3 года назад

Lol, Cheers

@XLpacman805 Месяц назад

Every time I hear plumbob I think of a Plumbus.

@markandsamafterwork Месяц назад

Lol, cheers

@heremyjogan 2 года назад

I use bubble levels for archery too. You'd be surprised how much can't you naturally induce while drawing a bow. Level almost feels unnatural.

@markandsamafterwork 2 года назад

Yes we use them for that too, Cheers

@brandonrenner9597 Год назад

Do you lap your rings?

@markandsamafterwork Год назад

Some times, but not with the mono bases we normally use, Cheers

@stevethompson7613 Год назад

At what height should your scope be from Barrel

@markandsamafterwork Год назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aXMLyoRhoOQ.html .... how to find info ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FKPR4gaieSg.html

@mattstacy1652 Год назад

What if after leveling the scope the crosshairs inside the scope are off? Does that mean that the scope is messed up?

@markandsamafterwork Год назад

Explained in video, maybe watch and listen to the full thing, Cheers

@lighturpl3 3 года назад

Does it actually matter if your scope is level to the rifle? Is not what is more important is that the scope is level to gravity when taking a shot? So the scope should be leveled, most importantly, to the level on your rifle?

@markandsamafterwork 3 года назад

All needs to be level, scope, barrel, bubble, that's if you want to be able to accurately be able dial onto target, especially at long range, Cheers