When you are building a vehicle like earl the motor tends to be the main point. Today we show you why its a good reason to clean up your engine. For us it was a motor that no one loved and never changed the oil resulting in caked up oil everywhere. Enjoy!
I understand it is long so I have tried to add time stamps below to various sections you may be interested in:
1:00-8:57 Parts
8:57-14:21 Prepping Block
14:22-15:48 Oil Bypass Install
15:48-19:08 Bearing Clearance Check
19:08-24:23 Piston Install
24:23-30:40 New Oil Pan Clearance Issue( Windage Tray)
33:08-40:02 Head Stud and Head Install
40:02-43:15 Installing Rocker Arms
sidestep LS1Tech Info
With the engine in the number one firing position, tighten the following valve rocker arm bolts: Tighten
(1) Tighten the exhaust valve rocker arm bolts 1,2,7, and 8 to 30 N·m (22 lb ft).
(2) Tighten the intake valve rocker arm bolts 1,3,4, and 5 to 30 N·m (22 lb ft).
8. Rotate the crankshaft 360 degrees.
9. Tighten the following valve rocker arm bolts: Tighten
(1) Tighten the exhaust valve rocker arm bolts 3,4,5, and 6 to 30 N·m (22 lb ft).
(2) Tighten the intake valve rocker arm bolts 2,6,7, and 8 to 30 N·m (22 lb ft).
Stock Head Bolt Torque Sequence
build.torqued....
Additional Torque Specs
help.summitrac...
29 авг 2024