Тёмный

LS S10 Swap Headers & Dirty Dingo PS/ALT Bracket Installed! 

DEADBEATGARAGE
Подписаться 69 тыс.
Просмотров 29 тыс.
50% 1

Be sure and show some #dbfam love to fabBot for taking care of us!
Be sure and let them know you're #dbfam if there's anything they can help you with!
Visit FabBots website 👇
www.fabbotfab.com/
FabBot on Instagram
fabbotfab?igshi...
FabBot LS into Colorado mounts we're using.
www.fabbotfab.com/products/fa...
FabBot adapter plate bundle we're using
www.fabbotfab.com/products/fa...
FabBot Power steering adapter kit we're using.
www.fabbotfab.com/products/07...
in today's video we install the 5.3 l third generation LS out of a 2001 Chevy Tahoe into my son's 2007 Chevy Colorado. huge thanks to Fabbot for the conversion kit! The AR5 to LS transmission adapter made things super simple! especially bolting the LS into the Colorado using the fabbot LS conversion mounts made it seem like it belong there, we also don't have to go through the hassle of figuring out how to run the power steering lines thanks to the Fabbot power steering conversion kit. just about everything was a direct bolt in, only thing that had to be trimmed was the engine cradle to clear the LS into Colorado conversion mounts. LS swapping made simple! thanks once again to Fabbot. highly recommend using their products in the links above for any of your LS into Colorado / canyon needs!
Want to help with the builds?? Follow the links below!
Become a Patreon here
www.patreon.com/user?u=22862832
Buy merch here
deadbeatgarage.myshopify.com/
Send Me Stuff Here
Bravus Jeffries
P.O. Box 23398
Phoenix AZ 85063
Follow me on social media
Facebook
RU-viddeadb...
Instagram
deadbeat_ga...
Built Not Bought group on Facebook (fixed the link)
/ 768216480031651
Thank you all for the love and support you have shown, it is greatly appreciated!
Check out all the links below! Help support the companies that support the channel! #dbfam
MPC Motorsport website! Full of badassery!!
www.mpcmotorsport.com/
MPC Motorsport on Instagram
mpcmotorspo...
Looking for some custom fabrication!? Get ahold of Sic Industries, LLC.
Facebook
/ sic-industries-llc-529...
Email
sicindusrties@hotmail.com
Visit Finish Line Factory for all of your AN line needs!!
Finish Line Factory Website
finishlinefactory.com/
Enter "deadbeatgarage" at checkout to receive 10% OFF!!
Finish Line on Instagram
finishlinef...
Finish Line on Facebook
/ finishlinefactory

Авто/Мото

Опубликовано:

 

4 июн 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 79   
@Leo_SN95
@Leo_SN95 Год назад
THE GREEN HOLES ARE NOT FOR A COOLER THEY DO NOT HAVE FLUID RUNNING THROUGH THEM THEY ARE FOR AN FACTORY BRACKET THAT SECURES THE PUMP TO THE ENGINE BLOCK
@daviddaniels6818
@daviddaniels6818 Год назад
Every channel on RU-vid has things that set them apart I really enjoy your content because of the amount of effort you put into detail when doing projects
@twisted9780
@twisted9780 Год назад
Roughly 6 months ago bro you were debating which direction to move now we’re (I say we’re cause we are the DBFam) watching you build trucks and cars making moves. Proud of you brother and keeping like addicts on videos. You build and upload and we’ll keep supporting how we can.
@willmatic84
@willmatic84 Год назад
😌🤙🏼 anit nothing like a deadbeatgarage video in a Monday afternoon after work 😏👌🏽 #dbfam
@gerryc623
@gerryc623 Год назад
Amazing video, as always!! Keep up the great work, but let's remember the real problem here! The fact that Hector is gonna be running three Honda Civics with Spoon engines. On top of that, he just came into Harry'sm and ordered three T66 turbos with NOS and a Motec system exhaust.
@PeterFeltersnatch852
@PeterFeltersnatch852 Год назад
Shitz so played out... Be original
@mikeyacullo
@mikeyacullo Год назад
Such a sweet clean build man. Truck is going to be badass
@el_deplorablede_tejas1394
@el_deplorablede_tejas1394 Год назад
Speedway has some cool Power Steering Caps. I'm loving the build. 👍
@victorwilks88
@victorwilks88 Год назад
Always perfect timing 😮⁹
@yusefhasan7524
@yusefhasan7524 Год назад
I spent all weekend waiting for this vid to drop. This channel never disappoints
@EJ6_ALEX
@EJ6_ALEX Год назад
badass bro!
@Caution.beware
@Caution.beware Год назад
Dope build 💪
@spacestreef
@spacestreef Год назад
for power steering cooler just buy a 07 - 09 chevy trailblazer one its small and cost something like 30 bucks 🤘 love the build and keep those vids coming✌
@FIVE5NINE
@FIVE5NINE 9 месяцев назад
Nice 👍🏽 I have a built 6.0 4l80 swap in line running Holley dirty dingo mounts trans brackets powered by Holley
@tripleg139
@tripleg139 Год назад
Sick bro sick
@allenherman6751
@allenherman6751 Год назад
Oh yeah buddy 🎉🎉
@mastercricket7626
@mastercricket7626 Год назад
O snap we gonna start calling u LS daddy 😅.. peace and love brotha keep it rad stay safe and build on l8z #DBFamStrong #BuiltNotBought #WhoopWhoop
@mikeyacullo
@mikeyacullo Год назад
Dirty dingo shit is dope
@jorgenavarro5291
@jorgenavarro5291 Год назад
OCD killing me bro, watching does brake line with purple paint 😂😂😂❤❤❤ love the content
@tommoon2700
@tommoon2700 Год назад
#dbfam strong 🤙🤘
@acef_performance8416
@acef_performance8416 Год назад
Ready for the cheat code, u can use hydraulic jic fittings on AN fitting jic has many adapters shorter than AN and they are rated to much higher psi. I use them on my car no leak anywhere
@deadbeatgarage
@deadbeatgarage Год назад
I'ma look into this. Probably would have helped me today with the power steering lines 🤣😫👈
@JohnMcMahon-yf5ks
@JohnMcMahon-yf5ks 4 месяца назад
There are special large head bolts that go in the holes that simply retain the can to the pump. They have to be 18m headed x 10m/1.5 I think in order to compress the o-ring between the can and the pump body to seal. There is a small Dia. vac. booster for some models of those trucks that you will most likely need to clear the valve covers.
@bobbyjones2363
@bobbyjones2363 Год назад
Yea what he said.(about the holes ( little short bolts)
@horsefly1020
@horsefly1020 4 месяца назад
I'm surprised you didn't use truck accessories. They fit perfect on a s10 and cheap or free if you have a truck engine.
@justinguarino201
@justinguarino201 Год назад
Early 😎. Hammer is friend when it comes to firewall clearance 😅
@ryanheisey7719
@ryanheisey7719 6 месяцев назад
If you wanna know a trick for future broken exhaust bolt extraction weld that bead on there first like you did then the nut and get on it with a wrench for pressure and gently put an air hammer on the center of the bead and hit it with the air hammer while turning it works everytime if you got one thats really stuck
@tegnando2697
@tegnando2697 Год назад
Let's Go 💪🏼💯
@elicerolmo6200
@elicerolmo6200 Год назад
Good work . 100
@tavio5574
@tavio5574 Год назад
Hell yeah perfect timing on the video drop! Let's go!!
@tripleg139
@tripleg139 Год назад
🔥🔥🔥🔥🔥
@lunchboxjoeb
@lunchboxjoeb Год назад
whats the temp rating on that thread sealant? Teflon tape goes up to 550
@josenoguerasjr.6873
@josenoguerasjr.6873 Год назад
Lessss gooo.
@veauntraywilliams4984
@veauntraywilliams4984 Год назад
Yea mon
@willramerman7016
@willramerman7016 Год назад
the 2 green holes are for the bolts that hold the res to the pump you need them or it will leak
@ELLeeOh
@ELLeeOh Год назад
👍👍from this guy
@outerlimitsmotorsports8385
@outerlimitsmotorsports8385 Год назад
Im aswell doing a ls swap. But in a g body Montecarlo
@75rdube
@75rdube Год назад
Next time take and weld a flat washer to the broken bolt then weld the nut to the washer. Works way better tha just welding the nut on it.
@brianjohnson845
@brianjohnson845 Год назад
Them 2 caps are for factory bracket.
@ronmiller1162
@ronmiller1162 Год назад
great video today bro lots of shit finished and you said the correct engine mounts were taller holly chit man your gonna have to remove your brake booster which might be the way to go on this unit
@nz715
@nz715 Год назад
Think ya could do a write up on the AN fittings you used to convert. Could use that info
@FrankA-973
@FrankA-973 11 месяцев назад
Hey bro nice work! What size spark plug wires did you choose from speed engineering. The offer 10 or 12 inch. ? Thank u.
@JSantos777k
@JSantos777k Год назад
🍿
@brandonrohrer7914
@brandonrohrer7914 Год назад
3:52 boi your job is to make videos for me to watch ! Go to the yard and save the 120 ! 120 for a turbo Ababay
@chrisshaw1960
@chrisshaw1960 Год назад
There needs to be bolts in there to hold the reservoir to the actual pump. Without bolts it will leak.
@chuie180
@chuie180 Год назад
you should of went witth the arp ls exhaust bolts never have to worry about them brakeing in the head
@banky9885
@banky9885 Год назад
😂😂 label B B C meaning BumBoClaat 😅😂🇯🇲💯👍
@internallycombusted1
@internallycombusted1 5 месяцев назад
Did the steering shaft end up clearing the headers well? just curious. I got the same headers and steering shaft. just wondering what i'm going to run into. also what engine mounts did you end up running and what oil pan? thanks
@promotiveeng
@promotiveeng Год назад
Are the new engine mounts going to affect the clearance with the notch you made in the K member ???
@nicholasstringer8025
@nicholasstringer8025 Год назад
I work at an engine machine shop and I feel your pain on that broken bolt
@DDM_LOS
@DDM_LOS Год назад
Make sure to put heat wrap around the spark plug wires bro. They will melt
@smokinkp61
@smokinkp61 Год назад
gotta paint that gearbox
@apere003
@apere003 Год назад
Headed to Phoenix in 3 weeks...do you recommend anyplace worth checking for truck sales?
@FinessedIt
@FinessedIt Год назад
Think gonna need to use the 🔨 for modifications 🤔
@deafyjdm
@deafyjdm Год назад
Hell yea bbc lol😂
@user-kg5sw8pt8o
@user-kg5sw8pt8o 11 месяцев назад
What episode is the fuel system done in 😂asking for a friend
@allenherman6751
@allenherman6751 Год назад
Brakes booster
@whiteyloc7
@whiteyloc7 Год назад
I enjoyed today's video, as always, but I thought we were going to hear Bravens LS roar for "Mondays video" 😢
@the570shop2
@the570shop2 Год назад
Pull the green plugs out make sure it’s not oem mounting
@the570shop2
@the570shop2 Год назад
I wanna say factory bracket bolts back there
@truckingwithwill4942
@truckingwithwill4942 Год назад
When are you planning on LS swapping a civic sedan with a tub’d rear, slicks, and a wheelie bar? 😂😂😂
@ryanwinter7545
@ryanwinter7545 Год назад
Yo those little plastic caps on the back of the pump need to be bolts
@rozayek8068
@rozayek8068 Год назад
BBC FAM 🤣🤣🤣
@Irrelevantskill
@Irrelevantskill Год назад
they give you nuts with your B,B, and Cs?!
@scottdoubleyou563
@scottdoubleyou563 Год назад
🤣🤣🤣
@4475sk
@4475sk Год назад
#dbfam
@thatguyroute76
@thatguyroute76 Год назад
Damg man if u was gokng to detail the engine u shouldve done a full engine rebuild and cleaning
@justin6604
@justin6604 Год назад
BBC!!!!!!!!😂😂😂😂😂
@bighomieJ5X
@bighomieJ5X Год назад
LS noob here . How can you tell the difference from 5.3/4.8 if your buying off the street ?
@mahdialsadiq349
@mahdialsadiq349 Год назад
Use washer before you weld
@eklife6425
@eklife6425 Год назад
My brother I wish you would go electric power steering.
@tetfemal03
@tetfemal03 10 месяцев назад
What's the part number for the -6an fittings
@Nimbus.
@Nimbus. Год назад
money shot 8:35
@shadymaint1
@shadymaint1 10 месяцев назад
Installing the pully on the power steering pump with a hammer is a big no no.
@brandonrohrer7914
@brandonrohrer7914 Год назад
Why not try stock truck accessories drive save money!
@Ordinary-drummer
@Ordinary-drummer Год назад
dude you have one hell of a cave hanger you need removed !
@afaris
@afaris Год назад
BBC. 😅😅😅😅😅😅😅
@sweettee3647
@sweettee3647 Год назад
First half is repeat of Saturday. Come on. You have plenty of stuff there for contact without repeating the vid
@miguelcontreras3946
@miguelcontreras3946 Год назад
Chill it’s a stock 5.3 my 98 Camry faster
Далее
5.3L S10 LS Swap - Engine Fitting and Frame Notching.
18:21
Zlatan embarrasses Speed 😂 #ishowspeed
00:32
Просмотров 15 млн
Каха и калЪян
00:46
Просмотров 272 тыс.
NEW Dirty Dingo Mounts! Has the engine sitting RIGHT!
13:32
LS Swapped S10 Blazer is looking BEAST!!
32:03
Просмотров 21 тыс.
LS Blazer Converted to ALL AN fuel Lines!
34:39
Просмотров 13 тыс.
How To Ls Swap: S10 Basic Tips and Tricks
12:25
Просмотров 85 тыс.
I Bought the Cheapest LS Swap Headers on eBay
13:52
Просмотров 2,6 тыс.
ГЕЛИК из ДЕРЕВА!🌳 #shorts
0:37
Просмотров 2,4 млн
Тест Подвески БМВ
1:00
Просмотров 301 тыс.