I have that same wax, it works really well on my table saw and mitre saw. Plus I use a little bit every so often on my Festool rails. Nice video Peter. 👍🏻
Hi Peter, gotta question? Is there not some screws on the other table? My Jointer/Planer has screws on both tables. In any case, I want to tell you; that in 40 yrs; of buying and using Jointers and Planers; I have never seen any teaching, how you did. it! Really great Sir. But of course, our Peter Parfitt; never let's any thing go, that is needed. Thank you Kind Sir. For We❤You! And Cheerio, from over the Pond!🤠
Hi Pat, Most machines will have adjustment screws on both sides. There are 3 elements that need to be set up correctly relative to each other - the two tables and the cutter block. If the cutter block is fixed with no adjustment then the two tables need to be set to conform to the cutters. Thank you so much for all of your kind and most welcome comments. Cheers. Peter
I was taught (50 years ago) that the outfeed table should be at a few thousand” below the height of the ‘knives’ I have always used that method and get perfect results. If your tables are at the same height then the board is coming off the blade and not being supported. But if you are letting the board land on the outfeed table the end result will be a slight bow in the wood.
Actually, maybe I msised it, but dont you put grese on the thicknesser "pilar" (that goes up and down to regulate thickness depth)? if so, do you wipe the old one with white spirit or something? which type of grease do you use?