PART TWO! Make your own Coleman Lantern Check Valve Removal Tool from scratch only using common hand tools. This CV Tool will allow you to SAFELY remove a Coleman Check Valve from most Coleman Lanterns or Stoves.
Watch the other video (Part 1) to see one being made with a basic Metal Lathe.
*** Newer Coleman products use a 8x32TPI Valve Stem. You can make an additional rod by using a 8x32 Tap and taping the end of the rod. Then install a 8x32 Stainless machine bolt and LocTite it in place.
Tools required:
1/4" x 32TPI NEF Die
1/4" x 20TPI Die (optional - if don't use a 6" bolt)
Die Holder
Drill (c/w 1/2" chuck)
Ruler
Vise
Hack Saw c/w Fine Tooth Blade
Mill Bastard File
Bastard File
Square Bastard File
7/16" wrench
Emory Cloth
600Grit Wet/Dry sand paper
1/4"x32tpi tap Amazon: amzn.to/3aMunsi
Material:
1/2" x 120 wall Steel DOM (Drawn Over Mandel) ~ 5-1/4" long
1/4" x 20 x 6" Long Grade 5 Bolt
1/4" Cold Rolled Steel Rod ~ 6" long (optional - if don't use a 6" bolt)
*** If you don't want to make one I occasionally do small rums of these for people.
www.flyballequip.com/other-pro...
About This Channel:
This channel has a wide variety of content. I’m interested in many things and topics. I create video's on things I like and what I feel my subscribers would like as well.
This channel is basically about two things:
1.) Show you how to MAKE things, FIX things, TIPS on how to do things and to give you IDEA'S on how to make your life a bit easier! I encourage you to use your hands the to learn something new!
2.) People say I do fun and interesting things and have interesting hobbies. I like to share that with you and I hope this inspires you to do things and to get out there as well!
Thanks for stopping by. I’d appreciate if you subscribe, you never know what video may inspire you!
6 июл 2024
