How to Make a Hole-in-One Golf Ball Trophy Paperweight Cube from Epoxy Resin | DIY | Tutorial

Подписаться 122 тыс.

Просмотров 433 тыс.

50% 1

Turn a golf ball into a trophy paperweight using a few simple materials and a silicone cube mould. This is the largest of the standard cube moulds (measuring 65mm square) and holds a LOT of resin - about 265g plus the golf ball.
Depending on your brand of resin you should expect to fill this mould in several layers to avoid an uncontrolled exothermic reaction, which may cause your resin to overheat and boil.
USA Affiliate Links
50 Mica Powders: amzn.to/2zY3ZW6
18 Liquid Pigments: amzn.to/2LB3dUm
10 Glow Powders: amzn.to/34qBoqN
32oz Epoxy Resin: amzn.to/38WGtbA
Pipettes pk/200: amzn.to/2HxEpLX
UK Affiliate Links
50 Mica Powders: amzn.to/315yKV4
18 Liquid Pigments: amzn.to/315z6Lo
10 Glow Powders: amzn.to/34n6aAC
Pipettes pk/100: amzn.to/2Zp6sbg
1.12Kg Epoxy Resin: amzn.to/2OjjeAE
Moulding Silicone: ebay.to/2ZkLSsA
3mm PVC Foamex: ebay.to/2ZwTOlV
*As an Amazon associate I earn from qualifying purchases
#resin #resinart #resinace
All music is copyright-free and sourced from the RU-vid audio library

Хобби

Опубликовано:

18 апр 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 267

@resinAce 5 лет назад

This video is closed captioned. Please turn on your subtitles to view tutorial text.

@BronthPlaylists 5 лет назад

< 3

@mackemftm74 5 лет назад

Why the lighter?

@resinAce 5 лет назад

@@mackemftm74 A quick blast with a lighter flame will pop any surface bubbles

@katemcclure6959 5 лет назад

@@resinAce my husband has attempted a similar golf ball resin project years ago. The golf ball appeared to have expanded from the heat during the curing process then when it cooled it separated from the resin creating a void making it look like it had a giant air bubble around the whole ball. It wasn't though they took great care to get all the air bubbles out of it. Question being what happened and how do you prevent it? Thank you for any input.

@resinAce 5 лет назад

@@katemcclure6959 Did he use epoxy resin or polyester resin, because it sounds to me like he might have used polyester resin, which shrinks as it cures and can pull away from the surface of shiny objects like a golf ball. This creates a mirrored effect, which would look like an air bubble surrounding the object. If he can't remember, ask him if it was flammable and smelt really bad, if it did then it was polyester. If he did use epoxy resin, he needs to control the exothermic reaction to prevent it getting too hot. This basically involves pouring smaller amounts of resin in layers, and waiting for each layer to firm up before pouring the next. Some epoxy resins are better suited to deeper pours than others. Check the datasheet and it should give you a maximum pour depth for that resin type.

@maj9241 5 лет назад

Awesome video. Some great tips, especially regarding the overheating of resin! ⛳️

@rouflyinthesky6772 5 лет назад

J’adore, comme d’hab c’est super👌🏼fabuleux travail resinAce j’adore toutes tes oeuvres❤️

@anneargo-davies692 5 лет назад

You did it again, I will always be amazed by your creativity and I love your humor. I often interpret sarcasm for the family as it just isn't their strong suit and that just looses the funniest part, so I watch you by myself and they don't know why I'm laughing so hard. Thank you, it's always a good day when you upload a new video. Just ignore the haters, your fans do.

@Black-Swan-007 5 лет назад

Very cool! My grandpa is a golfer, this would make a good gift for him!

@paulc5817 5 лет назад

Wow. That is beautiful. I am lucky to have two hole in ones...... would love this for my golf balls. Awesome job

@gabrielleconti 5 лет назад

Excellent! And no bubbles! 😍👏👏👍

@JLo7575 5 лет назад

So simple and efficient 😉 Thanks for sharing, take care

@BronthPlaylists 5 лет назад

how amazing its wonderful and the music too

@skeewee13 4 года назад

I absolutely LOVE this idea! l have a friend who plays golf and l know she would like it

@vilian4373 5 лет назад

Hello ladybugs! Efficient work, beautiful result and jokes in the captions = perfection!

@waleedahmad8243 5 лет назад

A masterpiece in no time

@pamcarr4003 4 года назад

Ahhh, the ladybugs. Very nice accent ! Great job Ace, Pam

@ruggeri2b 5 лет назад

Magnifique. Bravo 👏👏👏je me suis régalée. 👍👍👍

@lisawebb7176 5 лет назад

I find it fascinating watching your up loads, if only I could do things like this, love your channel :)

@CreatewithSqudgeCraft 4 года назад

Absolutely love this idea. That's the father in law sorted for Christmas! Thanks!

@romanticcrafter 5 лет назад

What a great project...Looks fantastic

@aprilskies1051 5 лет назад

This looks great! Thanks for sharing ⛳

@vonniescrafts1 4 года назад

This is amazing I really love this and I have this mould thank you for the video xx

@mizzuzie3338 5 лет назад

One ladybug sneaked in but the knuckles made it out safe yet again! Lovely trophy for a golfer.

@jerrilynnroth2117 5 лет назад

Ahhhh! This hole in one trophy is perfect for the area where I live! We are having the world known annual RBC Heritage of golf tournament on Hilton Head Island, Soutg Carolina USA. golfers from all over the world come here to play right after the Masters tournament in Augusta, Georgia USA

@Suseka61 5 лет назад

What a brilliant idea - I know some very keen golfers and this will be the perfect gift. Many thanks for your wonderful tutorials... oh, and, love the ladybugs (or as we call them locally 'bishy barnabees' :)

@resinAce 5 лет назад

I have never heard of bishy barnabees before

@traceyms1971 5 лет назад

You snuck in 2 ladybugs! I like this piece. If only I knew a golfer....

@unbolero1 4 года назад

Precioso, gracias por el tutorial

@kinmakin2180 5 лет назад

love this channel

@giuseppecolombo4701 5 лет назад

Una meraviglia complimenti

@patriciadrake4707 5 лет назад

I love the ladybug. 💖🐞

@rivqyahscraftcorner 5 лет назад

Just love your work resinAce :)

@TurkeyCreekjackjohnson_ Год назад

Extremely cool

@riley.holmes 3 года назад

That's sick!

@PaullaWells 5 лет назад

Too cute! Make sure no lady bugs before you pour. Lol Cracked me up!

@MegaGrownFolks 4 года назад

Sooooo beautiful

@nicholdas Год назад

Brilliant!

@DAKtheKING 5 лет назад

This video resonates with me.

@Diamondpaintingslover 5 лет назад

Love it neat idea

@jasonwick3257 5 лет назад

Actually a very cool video 😯

@mehdiaghasi7141 3 года назад

Great job

@chriswhite2824 3 года назад

Very nice work brother 👍

@joannekucks4343 2 года назад

I collect the lucite/resin paperweights made by William Rolfe. They have natural materials assembled as scenes from the woods with rocks, lichen, mushrooms, insects, flowers, etc. He sold them in the United Nations gift shop in the 1960s. I’ve always wanted to make my own with Minnesota materials. Your video was very simple and easy to follow with minimal materials. Thank you. 🥰🇺🇦🌻

@judichristopher4604 5 лет назад

"WOW" Amazing

@NicoleMacintyre52 5 лет назад

Hellooo always nice to see you!! Very nice 💞

@resinAce 5 лет назад

Thank you my #1 supporter :)

@NicoleMacintyre52 5 лет назад

resinAce You’re welcome 💞

@waluigicollectorofsouls2298 5 лет назад

This looks so nice i whant one

@tomdonnellan7920 5 лет назад

It would be easy to make something like this look cheap and tacky but look at this, pure class.

@Drizzle600 5 лет назад

WOW!.. I Really need one of these! But mine needs to say double bogey 👍🏻 🏌️‍♂️

@reinwaldfabienne5890 5 лет назад

Super!! 😍😍😍😍😍😍

@cranium33333 5 лет назад

Hopefully I’ll need to make one of these soon!🙏🏻

@resinAce 5 лет назад

Good luck! 😎♠

@lisathomas8916 5 лет назад

Very nice! ❤️

@resinAce 5 лет назад

Thank you 😎♠

@number1beastielover 5 лет назад

That was amazing! I wish I could give you 1000 likes.

@user-so9qi5fw7n 5 лет назад

Wow like it

@cnrart.claudiorodriguez9978 5 лет назад

muy bueno. saludos

@mnrmyc 5 лет назад

So cool! if i had any idea on how to use resin or whatever that is i would love to do this to my dad's hole in one ball.

@G_Silent 5 лет назад

Tiger Woods PGA tour 2000’s? The trophy balls? This diy project reminds me of those trophy balls. Well they can now be brought to life!!!!!

@ClairesCraftyCorner 5 лет назад

This is so cool !! would totally work with loads of hobbies ay! .. question .. how do you clean out your pippets or syringes ... or clean pots in general ?

@dabbodabbo1415 5 лет назад

Too good aaa toooooo goooooood awesome uuuummmmmmaaaaa

@DeeKlemann 5 лет назад

Oh no! A lady big got trapped in the grass!!! Lol....love it!!!

@nikkiscott3634 5 лет назад

Hi ResinAce! Omg! Had to sub! What an awesome job. I see no bubbles. I would love to do what you do, but am scared my projects would have bubbles all over🙂🌷👍

@gshufelt09 5 лет назад

Rita Scott thats what the heat is for... gets the bubbles out

@thomhdln412 5 лет назад

Thats awesome !!! Love it ! Also whats the 2 last songs ? 🤔

@AK-dt3gi 5 лет назад

すごい！

@retiredlady7654 5 лет назад

😊 lovely

@resinAce 5 лет назад

Thank you 😎♠

@robrayner5681 4 года назад

Great video! I seem to be getting visible lines between my layers. What can I do to prevent this? Am I letting the layers cure too much before adding the next layer?

@craftyfox2774 5 лет назад

Never would have guesed that the edges are so sharp!!🔪

@resinAce 5 лет назад

Yes, they can be razor sharp! 😎♠

@MrAndreagia 5 лет назад

EPIC HOLE IN ONE

@justintime112 4 года назад

Resin ace: "Ensure there are no ladybugs in the grass before doing your next pour" Ladybugs: haha.. Jk... Unless? 😳😉😏

@spiritofMongan Год назад

perfect. I want to make on bigger where the tee shows.

@user-pq7bx5wy4p Год назад

Loved the video. When I tried there were bubbles all over the place almost couldn't see the ball. What did I do wrong?

@kennethmckay8194 4 года назад

Hi can you please tell me everything I need to make these and where to get them

@melodiekerns2933 3 года назад

Hay I was trying to fine out the grass you are using I did fine in door out door wonder if that would work

@bobli9037 Год назад

Nice video. will you please let me know where I can buy the rubber container?

@tuyenvo86 5 лет назад

this is cool...now i just need to go hit a hole in one 😑😅

@kurta60000 3 года назад

I know it depends on resin but how long did this take you? You know between curing times and pours. Thanks it was a great video.

@blackberrybunny 5 лет назад

You are so amazing! Do you ever have mishaps? And why not dome while its in the mold-- wouldn't that be better so any errant resin will not slide down the side? I am afraid i'd put too much and it would run down and ruin everything. LOVE the comment about making sure there are no ladybugs in the grass, and then you put a little bug in there anyways. So sweet!! I love you, ResinAce!! I'm watching one of your videos per night. :-)

@resinAce 5 лет назад

Hi, thanks for the great comment. Yes, I have mishaps, I once posted a fail video here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dfLqul6AmOE.html but then unlisted it because it performed badly 😢 If you dome in the mould, the static in the silicone can attract the resin and cause it to breach the edge. As long as you don't exceed 2mm deep the resin shouldn't overflow. I hope you enjoy the rest of my videos 😎♠

@andreels9639 Год назад

Great video thanks did you use casting resin for this thanks

@AshleighHanlon 5 лет назад

When you do multiple layers like this, do you cover it while curing? I've had dust and bugs getting in there for a look, but I haven't found an effective way to cover without too much heat building up.

@resinAce 5 лет назад

Hi, I only cover loosely so the heat can still escape. I do get the occasional fleck of dust or glitter in there sometimes 🤔 I guess all you can do is use a bigger cover, like a cardboard box or something. 😎♠

@DArcosGaming 5 лет назад

So the ladybug was unintentional? Made a good touch. Might use fake ones. Love your videos, Ace. I have started using techniques i have seem in your videos for my pours.

@resinAce 5 лет назад

No ladybugs were harmed during the making of this video ;)

@smplyjenn 5 лет назад

Niice.

@thehotstuff2805 4 года назад

Thanks so much for the vid! I recently got my first hole in one on july 14th and i am only 12. I will definitely try this!

@resinAce 4 года назад

Well done, a hole in one is quite an achievement!

@thehotstuff2805 4 года назад

Thanks

@sadiqulalom9095 5 лет назад

What materials are needed to make these object's Can thi's item be stored in a shop?

@niquil454 5 лет назад

WHAT KIND OF RESIN YOU USING THANK YOU

@erwanlecocq381 5 лет назад

Incredible! I run a golf course and this would be a gorgeous trophy for a hole in oner. I can imagine the player signin his ball before. How long do you need to wait for the resin to cure? Regards

@resinAce 5 лет назад

Each layer of resin will take a few hours to set firm before you can pour the next, but once the whole thing is finished allow 24 hours before unmoulding

@justsomeone4347 4 года назад

Can you make a fake hand somewhat in and out of the resin?

@pamelarodan3470 5 лет назад

Very nice project. However I just have to say this is the first time I have seen you miss air bubbles as well as not push your dome layer all the way to the edges. So that leads me to ask if after the dome has fully cured is it possible to go back and add a touch more if you missed a spot in the dome without it looking like a patch?

@resinAce 5 лет назад

Hi, thanks for watching 😎 I filmed this video in a very short space of time, so with 5 individual resin pours I had to speed up the curing in an oven. Whenever you mix resin without vacuum degassing there will always be tiny bubbles, which are barely visible to the naked eye. When you pour the resin into a silicone mould, the static attracts those bubbles to the mould, which is why they're always at the edge. When you put the resin in an oven, the heat expands the bubbles to make them appear larger, which is a negative side-effect of the process. The dome layer did go to the edge, but the edge was a little uneven in places, which is probably what you're noticing. I think the moral of this story is 'don't rush your work' 😎♠️

@stevewaite446 Год назад

Hi, do you do small layers of resin each pour or pour it in one go, many thanks

@Ma.hiraah 5 лет назад

Hello, this is amazing! I am wanting to try my best to make this! I am still new to using resin. I wanted to ask, in your text below your video you had mentioned that we should fill the mould in several layers to avoid an uncontrolled exothermic reaction where it would cause to overheat/boil. Is this including the room temperature? Also how do you cure the mould? Do you put it through a UV cured light? And also how long do you need to cure the mould before putting another layer on. Please help out. Sorry if these questions are silly >.

@resinAce 5 лет назад

Hi, thanks for watching. Every brand of epoxy resin is different, so you need to read the specifications for your own resin to know how much you can safely pour in one go. My resin is better suited to shallow pours, which take a few hours to gel at room temperature before doing another pour on top. The finished cube is left to cure for 24 hours before unmoulding. UV light is not required for standard epoxy resin to cure.

@DaveLynchJazzGuitar 2 года назад

Great video. Do you sell the things you make? If so, where? Thanks !

@RCarlitos Год назад

Greetings very nice, I want to know how many ounces of resin do I need for this job? Thanks a lot

@SandpiperN121PP 5 лет назад

This looks like a fun craft. Is it expensive to do? I loved the finished product.

@resinAce 5 лет назад

Epoxy resin can be quite costly, depending where you are in the world. Here in the UK I pay £25 per Kg for mine, which will only be enough for about 4 projects of this size, but will do a lot of smaller ones. A resin pendant, for example, may only use 15-20g.

@mokatz7449 Год назад

Awesome overall video…what calculator is that?

@jeffselano2300 5 лет назад

I'm curious where you got the mold? Keep up the great work

@resinAce 5 лет назад

Thanks :) I bought mine from this link on ebay ebay.us/205kI2 but if you search 'resin cube mould' you'll find other listings.

@shawnafernandez5764 5 лет назад

How do deal with witness lines?

@chadmichaelmobile4743 5 лет назад

Should I be able to smell the epoxy through my phone?

@resinAce 5 лет назад

My epoxy is odourless, which is probably why you can't smell it through your phone :)

@superlazy3355 5 лет назад

That's a great comment imo 👍

@dollhouseandminiatures4477 5 лет назад

Can I use resin out doors because it's taking a very long time to set outside I'm not allowed to use resin in my house so I do it outside now

@resinAce 5 лет назад

You can, but epoxy resin does take longer to cure in cooler temperatures. It also does not like moisture or high humidity, which can sometimes cause an unwanted effect on the surface.

@dollhouseandminiatures4477 5 лет назад

resinAce oh OK. Thank you. I need a garage or a shed

@celestialcrystalize8871 5 лет назад

Yea, the gems in resins do vanish, that happens to me all the time when i place gems in resin.

@magnet-o 3 года назад

Bc this guy didn’t actually explain. How do I make something like this? Where do I get the materials from etc

@jazzdrumguy5044 3 года назад

This was awesome! I would have not used the letters (not into the bling) and it's not a hole in one! Otherwise, very cool!

@cliffordfair1322 3 года назад

What color green powder did you use here?

@nanolego5518 5 лет назад

I play golf and i think it must be a prize

@mariagunnarsQ17 5 лет назад

Those darned ladybirds, they get everywhere tut :D

@simonac688. 5 лет назад

just beautiful...is it possible to no what brand of Rezin u use ...is it european brand or available in Canada also...thanks great job

@resinAce 5 лет назад

Thank you :) I am UK-based and use www.resin4art.com brand via their eBay shop ebay.us/LotNI0

@gsambolin Год назад

I have something I want to resin in that exact shape but don't have the skills to do so. Do you provide this service for a fee ?

@deansmith9341 4 года назад

Tried it, cannot get the bubbles out. Stirred slowly, heated the resin, measured part a & b correct, used a flame as displayed, what is the key to “NO” bubbles please?! Is it the product?