How to Make a Waxed Canvas Tool Roll for Wrenches

Подписаться 405 тыс.

Просмотров 101 тыс.

50% 1

Better than store bought! Sewing your own tool roll allows you to customize the design to your specific tools and needs. In this video, we’re sewing a tool roll for a wrench set using DuraWax™ Waxed Canvas. Waxed Canvas is an incredibly durable, water-resistant and rugged-looking fabric used for bags, outdoor gear and clothing, utility bags and more. In the video, you’ll learn how to pattern the tool roll to fit your tools perfectly. You’ll learn how to work with and sew DuraWax Waxed Canvas, and how to create hems and sew pockets. We added ties to the tool roll so you can roll it up and secure it tightly when taking it with you, and you can also hang it in your workroom with the convenient grommets located along the top.
HOW TO MAKE A WAXED CANVAS TOOL ROLL FOR WRENCHES CHAPTERS:
Patterning Waxed Canvas from Tools - 0:55 min
Adding Hem & Fold Allowance & Cutting - 4:24 min
Creating Hems - 8:48 min
Sewing Pocket Plate to Back Plate - 14:29 min
Sewing Pockets - 17:55 min
Hemming Fold Over Edge - 22:45 min
Installing Grommets - 24:13 min
Adding a Tie Strap - 26:21 min
Materials & Tools List - 29:56 min
MATERIALS LIST:
DuraWax™ Light Waxed Canvas Cotton Duck 12 oz 57" Fabric - we used Item # 122413
www.sailrite.com/Fabric-Brand...
Thread V-92 Polyester UV 4 oz. - we used True Brown Item # 106391 www.sailrite.com/Notions/Thre...)
#2 Spur Grommet 3/8" - (Brass) Item # 26309 or (Nickel) Item # 26316 www.sailrite.com/All-Hardware...
TOOLS LIST:
Clear Acrylic Ruler 6" x 24" - Item # 102400 www.sailrite.com/Clear-Acryli...
Scratch Awl Yellow - Item # 2354 www.sailrite.com/Scratch-Awl-...
Gingher® 8" Scissors Right Handed - Item # 19104 www.sailrite.com/Gingher-Scis...
Sailrite® Deluxe Fabricator® Sewing Machine Package (110V) - Item # 400600 www.sailrite.com/Sailrite-Del...
Wonder Clips - Assorted Colors (Set of 50) - Item # 121902 www.sailrite.com/Wonder-Clips...
Sailrite® Drill Hole Cutter Set - Item # 121825 www.sailrite.com/Sailrite-Dri...
#2 Spur Grommet Die Set 3/8" - Item # 18203 www.sailrite.com/Die-Set-Spur...
Sailrite® Battery Operated Thread Burner - Item # 122432 www.sailrite.com/Sailrite-Bat...

Хобби

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 69

@greyviking2412 3 года назад

Please take this as a compliment.... your videos are like watching "This Old House"... same voice bass, same tempo, and most importantly same instructional methods... not sure if that was be design but it works extremely well for "How To Videos".... Thank you. I am a huge fan!

@SailriteDIY 3 года назад

Wow, thanks for the very kind comment!

@fredir3596 Год назад

I agree. Sailrite videos are so easy to watch and follow due to this.

@fryloc359 2 года назад

For as long as I've been watching your videos I never realized you guys are right down the road from me. I made one a few years ago out of old jeans. It works but I'd prefer a stiffer fabric that holds shape.

@joeconiglio 3 года назад

A wealth of information and sourcing. Thank you.

@longboredterrie 3 года назад

Just WHAT I WAS LOOKING FOR YOU ARE GOING TO MAKE ME LOOK REAL GOOD !!!!

@elconquistador932 2 года назад

We made one out of scrap sunbrella several years back. I'm a Mobile Marine Mechanic. Its now coated in about every goo you can imagine and its still holding up. BUT I'm adding this to my long list, wax canvas will definitely add to the cool guy factor when I bust out some tools.

@bayoubiker7834 3 года назад

Excellent video and craftsmanship. Thanks

@christopherward4272 3 года назад

Fantastic video, thank-you! There is nothing more manly than making your own tool belt :)

@brucestrand1013 3 года назад

This will be very handy I might have to make a couple! Thanks

@johnharding91 Год назад

I have learned a lot from Sailrite videos and accomplished several projects with their products and help.

@paulfrost8952 Год назад

I really liked the “Sailrite Battery operated Thread Burner”

@jeffallen3382 2 года назад

Cool looking project!

@lorihutchinson9485 3 года назад

Going to make some of these for Xmas presents. Thanks for the great video.

@SailriteDIY 3 года назад

Great idea!!!!

@fryloc359 Год назад

The one that came with my wrench set was nylon, and now the bottom seam is blown out. Im goingbto make one in a few days, but it will be one piece folded over to eliminate that bottom seam.

@markkennedy6155 3 года назад

Another great video. Thanks and Keep up the Good Work!

@SailriteDIY 3 года назад

Thanks - we are so glad that you liked it!!!!

@robertward553 2 года назад

Love it.

@msmisstype Год назад

Thanks for a great video 👍 I will be making one of these as a gift, only adaption is that I won't hem the bottom of the pocket, just tuck it in the hem of the outer fabric. Should reduce the bulk some 👍😊 Thanks again for all your great videos

@jzeerod Год назад

nice work. i actually made one one of these the other day out of an old waxed canvas bag i found in the old garage. it didnt turn out as nice but it works. made a long box end and a making a short box end. i just hate loose tools in the bottom of my bag. it went from 21mm to 6mm. i actually bought a set special for this roll up as some MMs are omitted, like the 16MM is so close to 5/8 they usually dont make the 16MM as part of the "complete" sets. it came with the imperial sets as well which i really dont use but are good for some stuff.

@geegurl25 3 года назад

My husband’s an avid smoker/pit master, I’ll be making one of these tool rolls for his knives. Great tutorial!

@SailriteDIY 3 года назад

Awesome! Glad our video inspired you to make a pouch for knives.

@juancuriel2275 3 года назад

Muy bonito trabajo y enseñansa que máquina de coseré económica recomendarías y muchísimas Gracias por enseñar

@stoneinthefield1 3 года назад

Great instructional video. Not sure my cheap Singer machine will get through those corners tho.

@lewismcgowen 2 года назад

Great instructional video. I used this to make a wrench roll out of leather, did a few things different on the seems but the lay out information was very helpful. Thanks very much.

@SailriteDIY 2 года назад

Good job!!!

@stitchthisditchthat259 2 года назад

What did you do differently with the seams?

@lewismcgowen 2 года назад

I just skived the edges (thinned them) and glued them with contact cement and folded them over and stitched them on the front and back plate edges. I made sure to inset them so that when I sewed the two pieces together I had room for another stitch line, when finished it looked like the front plate had a double stitched seem on the edges and bottom.

@dennisranck1613 2 года назад

The video was very instructional and I do appreciate the information in the video. I do need to make a custom tool pouch, not roll, for my stackable tool bin. For some reason the stackable tool bins do not have any organizers inside. The unfortunate part is I do not have a sewing machine, nor do I plan on buying a sewing machine to make several tool pouches. If need be, I will sew by hand all of the tool pouches that I will be creating, for a total of three or four.

@yinnybachin9113 Год назад

How long do you think that will take to make by hand?

@dscrive 3 года назад

Excellent instructions! I made one about a year or two back, I kinda fumbled through it since I didn't actually know what I was doing. and I've got to get me some wonder clips, I've ruined at least 50 pins trying to pin canvas :P

@sailingarista 3 года назад

Cheap option to use hair pins. The flat kind for pin curls.

@dscrive 3 года назад

@@sailingarista I'll have to look into that next time I go to the store. Thank you!!

@slamhead Год назад

I finally found out after doing two of these why my flap came up shorter than what I wanted. After you do the first seam on the top plate you place it on the corner marks. Right there you lose about 1/2 inch. Then there is no allowance made for a double hem on the bottom of the bottom plate. This takes away from the length of the top flap by about an inch and a half.

@Aneocs 3 года назад

6mm straight stitch, v92 polyester thread, size 20 needle

@anthonys.976 3 года назад

Which binding is a good fit for wax canvas? Oh, any chance you can make another video of making something out of wax canvas...purse, tool bag, messenger bag, .... even adding quilting. Thanks, for the great videos!

@SailriteDIY 3 года назад

Well, you can actually make your own binding out of the waxed canvas if you like, it folds like a dream when scored with an awl. Or you can use a tape maker to fold the waxed canvas to a binding size: www.sailrite.com/search?keywords=tape%20maker. But if you want a prefabricated binding I would pick Top Notch 9 Binding found here: www.sailrite.com/Notions/Trims/Bindings/Brand/Top-Notch

@digging4roots 2 года назад

Thank you. Nicely done. Question: what is the purpose of the grommets?

@SailriteDIY 2 года назад

Only used if you want to hang it on a wall.

@littlehills739 5 месяцев назад

still cant read tool size so even this would frustrate me raise the pocket or hole punch at tool size location

@lindawarren8487 2 года назад

I am curious why you started 6 inches in when laying out the first piece of fabric for the backing?

@timetoregroup2008 2 года назад

Quick question: Is it not necessary to finish the raw edges? This canvas doesn't fray?

@panioloprep8126 2 года назад

Got me thinking. I can use this as a template to make magaaine pouches for my handgun magazines.

@dalienhart 3 года назад

Thank you for the video. I'm just getting started using my new machine. What is the purpose of the spur grommets in this project?

@SailriteDIY 3 года назад

Your welcome! If you want to hang the tool roll on a wall, the spur grommets allow that. If you do not want to do that, don't use them.

@elefja1 2 года назад

Does waxed canvas keep moisture down around the tools? Wondering if these would be good to store items on my sailboat to deter corrosion

@mariamunoz6160 Год назад

Spray the tools with Boeshield once a year, that prevents corrosion. The waxed canvas is good for use in a dry area. In a very wet area, water can get stuck in the tool roll and then it is released over time. When it gets damp, you can not wash waxed canvas in a washer and dry it in a dryer, that would destroy the finish and leave specks of wax in the dryer to destroy clothes you dry later, plus it is a fire hazard. You can wash the surface by hand (instructions on Sailrite website) and dry in front of a space heater. This takes a long time to get it completely dry. Waxed canvas develops a "patina" of stains and cracks over time and lots of people like that. If this is not suitable for your application (sailboat) then you could use regular canvas which goes in the washer and dryer. But still spray your tools with protectant. I don't work for Boeing but my brother did, and since he started me on Boeshield for tools in my damp garage, I've used it religiously.

@lyndabuchholz1216 3 года назад

I like this idea but I would like there to be some way so you can see the size of the wrench. I might paint the size on the canvas.

@SailriteDIY 3 года назад

That is a good idea! I have seen some people sew on a strip of vinyl fabric and write with a marker on the vinyl fabric.

@lyndabuchholz1216 3 года назад

@@SailriteDIY That would work!

@jakebobjo 3 года назад

Does scoring canvas like that jeopardize its integrity??

@SailriteDIY 3 года назад

You obviously don't want to press to the point of damaging the fabric. Because it is a waxed canvas it is easy to score the fabric with little pressure, preventing harm the fibers.

@gypsyfirefly Год назад

Definitely will make for my husband. His tool rolls are falling apart.

@SailriteDIY Год назад

Excellent!

@gypsyfirefly Год назад

@@SailriteDIY I just made this last night for my husband and he loves it! Thanks for the pattern tutorial :)

@SailriteDIY Год назад

@@gypsyfirefly Excellent! Great job.

@GBLW 3 года назад

Where did you get the drill hole cutters I can only get wood, ceramic etc not those type?

@SailriteDIY 3 года назад

You can get them here: www.sailrite.com/Sailrite-Drill-Hole-Cutter-Set

@GBLW 3 года назад

thank you for that

@xfingerpaintx109 Год назад

Hi! Do you think I could do this in denim? I have some scraps I'd like to repurpose :)

@SailriteDIY Год назад

I don't see why not. Will look a little different but should still function the same.

@howardhardy1992 3 года назад

I like it. The way things are currently its important to always have imperial and metric wrenches. I just bought and put together the compact table and servo motor and it ha both metric and imperial bolts. It also called for a crescent wrench but I didnt know if it was for imperial or metric bolts and I dont yet have a metric crescent wrench? OK, if you are not giggling you must take yourself too seriously, or if you dont know why you should be laughing, you probably shouldn't be allowed to use tools. HaHa.

@fryloc359 2 года назад

Annoying, isn't it? I wish the US would just go full metric already.