Тёмный

How to make and Install a Custom Front Splitter 

HQ_GARAGE
Подписаться 5 тыс.
Просмотров 118 тыс.
50% 1

Thanks for Checking out my Channel, How to Make and install your own Custom front Splitter. I ordered the ABS Plastic from a shop locally and the Splitter rods were ordered from Amazon.
Want to Win an XKGLOW system for your car? Check it out :
• XKGLOW LED Underglow G...
Links to Everything that has helped me build the Channel
--------------------------------------
Camera Gear used -
Sony A6500 - amzn.to/3agKV61
Canon M100 - amzn.to/33KSRK
GoPro Hero 7 - amzn.to/2WF4SiX
Rode VideoMic - amzn.to/39glXCF
Aluminum Tripod - amzn.to/2xm8GeA
JOBY Gorilla Pod - amzn.to/3aiAiQk
Tools in the Garage -
Quickjacks Vehicle lift - amzn.to/3cd0RHU
Mr.Heater propane - amzn.to/2xmZQgu
Bosch Cordless 18V Drill/Impact - amzn.to/2Jez8cA
Teflon Sockets for Wheels - amzn.to/33H0n9h
24V Cordless Blower - amzn.to/39j6lyi
Car Car Products I use -
Dual Action Polisher - amzn.to/33JSAHz
Swirl Light - amzn.to/3dwkFH8
Gyeon Rim Sealant 30 ml - amzn.to/2JeadpO
Gyeon Prep 500ml - amzn.to/33Jtmcj
Gyeon GY-5006 Clay 100 g - amzn.to/39gu41W
GYEON Quartz Compound (120ml) - amzn.to/2QINd69
GYEON Q2M Polish (120ml) - amzn.to/33In2SB
GYEON Q2M Bald Wipe Microfiber Towel (16"x16") - amzn.to/2WDGFK1
Gyeon Polish Wipe Microfiber Cloth 16"x16" - amzn.to/2WDGFK1
Nanoskin AS-010 AutoScrub Medium Grade Wash Mitt - amzn.to/2lVap5h
Nanoskin (AS-015) Autoscrub 7" x 7" Handy Towel - amzn.to/2nBhLv6
Accessories -
Magnet Phone Mount - amzn.to/32DlBUI
Heat Gun - amzn.to/2y4K2PP
Vinyl Tools - amzn.to/3bmhqjq
Vinyl Plotter - amzn.to/33LlZ44
Order your Vinyl Here -
Blue - amzn.to/2UFRskq
Yellow - amzn.to/2UBGY5k
Bright Yellow - amzn.to/2QHhdiS
Order your Front Splitter rods Here
Splitter Rods - amzn.to/39lEaOZ
Corsa Performance Discount Code
www.corsaperformance.com/disc...
#BMW #F30 #Top5 #335 #X-Drive #watch #2019 #vlog bmw mods 335i

Авто/Мото

Опубликовано:

 

16 мар 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 392   
@HQGARAGE
@HQGARAGE 5 лет назад
Want to Win an XKGLOW system for your car? Check it out : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IWIomjycyUA.html
@AnthonyMichael504
@AnthonyMichael504 4 года назад
where did you buy that carbon piece to make the splitter out of?
@HQGARAGE
@HQGARAGE 4 года назад
I found my receipt and I got the material from Plastic Works Inc in Calgary AB www.plasticworksinc.com and the product code is 01CH and the description is 3/16” Carbon Fibre ABS
@AnthonyMichael504
@AnthonyMichael504 4 года назад
HQ_BMW thank you so much 💪🏼
@HQGARAGE
@HQGARAGE 4 года назад
Anthony Michael no problem anytime 👊🏻👊🏻
@haleighdralle8308
@haleighdralle8308 4 года назад
that is no different than one from a name brand manufacturer, much respect dude. Great job
@HQGARAGE
@HQGARAGE 4 года назад
Thank you I greatly appreciate that 🙏🙏🙏
@arnoldrochel4917
@arnoldrochel4917 4 месяца назад
Where can I buy the material sheet from ?
@NowahRudolph
@NowahRudolph 4 года назад
Dude yes!!! As a Craftsman this makes me SO much happier than just buying one. Totally gonna do this for my 3G Eclipse, thanks a billion for the vid!
@HQGARAGE
@HQGARAGE 4 года назад
🤘🤘nothing like being able to build one to fit your needs and your style. My pleasure thanks for checking out the vid 🙏🙏
@KINGJAMES2NYC
@KINGJAMES2NYC 4 года назад
You just helped me out big-time!!.. Wanted to do this for my CLS but didn't know how to even start the process.... Much appreciated!!
@HQGARAGE
@HQGARAGE 4 года назад
You are more than welcome 🙏 knowing that makes it all worth while making the vids 🙏🙏
@cre8tivegarage157
@cre8tivegarage157 4 года назад
Thanks for bringing us yet another vibe 🥂 enjoyed
@bootlegbumble4338
@bootlegbumble4338 4 года назад
Thank you so much I couldn’t find any good quality spliters for my mini
@HQGARAGE
@HQGARAGE 4 года назад
Awesome 👏 glad I could help out.
@nathanreddy2803
@nathanreddy2803 5 лет назад
dude you are seriously talented and super creative! love the splitter!
@HQGARAGE
@HQGARAGE 5 лет назад
Thank you 🙏 I really appreciate that.
@kylekpd
@kylekpd 4 года назад
Honestly looks just as good as one you would buy!
@HQGARAGE
@HQGARAGE 4 года назад
Thanks Man I appreciate that 🙏🙏
@jason216cleveland
@jason216cleveland 3 года назад
Actually looks really good. Thanks for the video and your time
@HQGARAGE
@HQGARAGE 3 года назад
Thank you and it’s my pleasure 🙌🙌
@jasonemile7163
@jasonemile7163 3 года назад
Dude that was an awesome fabrication. I’m inspired because i currently own a 2005 Bentley GT that I am working on-body kit and suspension work-all on my own.
@HQGARAGE
@HQGARAGE 3 года назад
Awesome 👏 I am glad I could help inspire you. I am impressed you are tackling it yourself
@jasonemile7163
@jasonemile7163 3 года назад
@@HQGARAGE yuppers! Going to order the plastic soon and get to work.
@thomasjohnson6616
@thomasjohnson6616 23 дня назад
Very nice really like your process
@JSJS23
@JSJS23 4 года назад
Awesome, to watch something created out of nothing . Great job brother
@HQGARAGE
@HQGARAGE 4 года назад
Thank you 🙏 I appreciate that 🙏🙏
@Trolleybus13
@Trolleybus13 4 года назад
You are a hero, man. Much respect 🙌
@HQGARAGE
@HQGARAGE 4 года назад
Thank you so much 🙏 I appreciate that.
@DanielCastillo-sh1sw
@DanielCastillo-sh1sw 3 года назад
What a genius, amazing job !
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏 I appreciate that
@zacherynewman507
@zacherynewman507 2 года назад
I saw the form block and I new instantly that your a fellow AME love this well done
@HQGARAGE
@HQGARAGE 2 года назад
Nice 👍🏻 that’s pretty cool that you knew right away.
@racingtodreams8082
@racingtodreams8082 5 лет назад
Great vid! I like how you bent the sides.
@HQGARAGE
@HQGARAGE 5 лет назад
Thanks Dude it was all trial and error. Just winged it lol
@darrylbonner7896
@darrylbonner7896 Год назад
Look great One of the best made ones I have seen
@HQGARAGE
@HQGARAGE Год назад
Thank you 🙏
@WaveyGravey
@WaveyGravey 3 года назад
what a sick video. nice one man. I'm going to follow this exact method and try this on my skyline! top man
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏 I appreciate the feedback.
@carloslewis8448
@carloslewis8448 4 года назад
Great job!!!! It looks awesome!!!!👍
@HQGARAGE
@HQGARAGE 4 года назад
Thank you 🙏 I appreciate that. 🙌🙌
@kylchn6002
@kylchn6002 4 года назад
Thanks for the video man!! I’m going to be making one for my 2019 type R!! I’ll drop a picture when I’m done!!
@HQGARAGE
@HQGARAGE 4 года назад
Awesome 👏 let me know when it’s done I would love to see the finished product. Your welcome and I’m glad it gave you inspiration to build your own
@kylchn6002
@kylchn6002 4 года назад
@@HQGARAGE Will do! Finally someone who made an easy to understand video. Where would you recommend I could get the carbon ABS that you went with?
@HQGARAGE
@HQGARAGE 4 года назад
I searched on google for a local Plastic Sheet company and started there. They were the ones that actually showed me the Carbon fiber looking stuff
@shashankgujar8966
@shashankgujar8966 4 года назад
Great trick man appreciate that and helped out.
@HQGARAGE
@HQGARAGE 4 года назад
Glad that I was able to help you out 👍👍
@rare-candy223
@rare-candy223 4 года назад
i own a tr7 and theres nooo aftermarket parts for it, so this was extremely helpful
@HQGARAGE
@HQGARAGE 4 года назад
Awesome 👏 glad I could help out.
@n50five
@n50five 3 года назад
Such a beautiful clean job 😍
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏 so much
@holymoly78
@holymoly78 Год назад
Omg that looks awesome 👏
@HQGARAGE
@HQGARAGE Год назад
Thank you 🙏
@zrgz_
@zrgz_ 5 лет назад
Music was rocking brother! Awesome video
@HQGARAGE
@HQGARAGE 5 лет назад
Thanks brotha! Thought I would change it up a bit. Just felt like the right mood for the video.
@saulskullscam3189
@saulskullscam3189 4 года назад
This was very helpful thank you👌
@HQGARAGE
@HQGARAGE 4 года назад
You are very welcome 🙏 thanks for checking it out.
@banga8080
@banga8080 3 года назад
1st time on your channel Great vid 👍🏾👍🏾👍🏾
@HQGARAGE
@HQGARAGE 3 года назад
Thank you for checking it out 🙏🙏
@MrROCKMUZK
@MrROCKMUZK 4 года назад
Professional job...excellent
@HQGARAGE
@HQGARAGE 4 года назад
Thank you 🙏 I appreciate that 🙏🙏
@felipemaldonado1701
@felipemaldonado1701 2 года назад
Thank you!!
@HQGARAGE
@HQGARAGE 2 года назад
My pleasure 🙏🙏
@eden3306
@eden3306 3 года назад
Couldn’t find any splitters for my Lexus is350 so this helped tysm
@HQGARAGE
@HQGARAGE 3 года назад
My pleasure 💪🏻💪🏻💪🏻💪🏻
@masonpugh3637
@masonpugh3637 Год назад
Great job 👌
@HQGARAGE
@HQGARAGE Год назад
Cheers
@phoenixMaxxOnShop
@phoenixMaxxOnShop Год назад
Looks good! 👍
@HQGARAGE
@HQGARAGE Год назад
Cheers 🍻
@JamesWebbFitness
@JamesWebbFitness 3 года назад
Looks awesome I just bought an e92 335 I'll be building one for just like this
@HQGARAGE
@HQGARAGE 3 года назад
Awesome 👏 congrats on the purchase. It’s gonna look awesome.
@1messi1ful
@1messi1ful 3 года назад
Amazing work
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏
@andrewt3619
@andrewt3619 2 года назад
Great craftsmanship 😳
@HQGARAGE
@HQGARAGE 2 года назад
Cheers 🍻 thank you
@gokit.o.5422
@gokit.o.5422 5 лет назад
That’s amazing !
@HQGARAGE
@HQGARAGE 5 лет назад
Thank you 🙏
@MrRussB
@MrRussB 2 года назад
This was a sick video! Great work
@HQGARAGE
@HQGARAGE 2 года назад
Thank you 🙏
@tevanvoskuil6060
@tevanvoskuil6060 3 года назад
cool idea love your handy work bro
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏
@Teramydog
@Teramydog 3 года назад
so cool - arts and crafts for big boys!
@HQGARAGE
@HQGARAGE 3 года назад
This is what elementary school prepares you for 🙌🙌🙌🙌
@joblowu
@joblowu 4 года назад
good job man!
@HQGARAGE
@HQGARAGE 4 года назад
Thank you 🙏
@midnightmodgarage7740
@midnightmodgarage7740 3 года назад
Awesome video Jeff! Planing on making something similar for my is300 I'm building on my channel. Just curious where the carbon pressed abs sheet came from? Thanks for the DIY. Keep up all the great work!
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏 I appreciate the kind words. I purchased the abs sheet from a local plastic company here in town called plastic works plasticworksinc.com
@nrodrig1026
@nrodrig1026 3 года назад
Wow nice i would buy one for my F30
@HQGARAGE
@HQGARAGE 3 года назад
Thank you, they are definitely easy enough to make.
@killerkiller-ej2sr
@killerkiller-ej2sr 4 года назад
it look great
@HQGARAGE
@HQGARAGE 4 года назад
Thank you 🙏
@richardc71
@richardc71 5 месяцев назад
Brilliant
@shawnking6397
@shawnking6397 4 года назад
Great Video!!!!
@HQGARAGE
@HQGARAGE 4 года назад
Thank you 🙏
@jg90crxsi
@jg90crxsi 4 года назад
Good Job Man.
@HQGARAGE
@HQGARAGE 4 года назад
Thank you 🙏
@keithh3099
@keithh3099 3 года назад
That’s cool.... I need one!
@HQGARAGE
@HQGARAGE 3 года назад
Thank you, yes I agree.
@chr0nicl3s
@chr0nicl3s Год назад
Nice one bro... I can make spoiler with that leftover sheet as well
@HQGARAGE
@HQGARAGE Год назад
Cheers 🍻
@Realpreshaanb
@Realpreshaanb 5 лет назад
😍😍😍 dammmmmnnnn that looks aggressive brother 😍 its going to look awesome with those rods 😁
@HQGARAGE
@HQGARAGE 5 лет назад
Thanks Brotha, hopefully I can find the longer ones. I’m have a heck of a time so far
@Realpreshaanb
@Realpreshaanb 5 лет назад
@@HQGARAGE i can imagine that feeling 😁
@15DurangoRT
@15DurangoRT 4 года назад
Nice job bro!
@HQGARAGE
@HQGARAGE 4 года назад
Thanks Bro 🙏🙏
@salehprohim9812
@salehprohim9812 3 года назад
Nice job!
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏
@raho24781
@raho24781 7 месяцев назад
That came out HeLLa NiCe bR0 ~*
@HQGARAGE
@HQGARAGE 7 месяцев назад
Cheers 🍻 Thank you 🙏
@r.a.s.motorsports7860
@r.a.s.motorsports7860 4 года назад
Great work! Looks Amazing.. Hey I have a WRX front lip that I'm custome fitting on a different bumper, but the lip is wider than my bumper like 2.5". Where do I cut to shrink it and make it fit? Love your wk, Thx in Advance.
@HQGARAGE
@HQGARAGE 4 года назад
I would maybe cut it in 3rds and have the pieces and connect kind of like this one 3Pcs Universal Car Front Bumper Lip Chin Bumper Body Kits Splitter Diffuser for Honda for BMW for Benz Carbon Fiber Look/Black www.amazon.ca/dp/B07YNLNW6T/ref=cm_sw_r_cp_api_i_iVtNDbJGFQ6HG
@creed7970
@creed7970 3 года назад
badass.
@HQGARAGE
@HQGARAGE 3 года назад
Cheers 🍻
@MrLiipasin
@MrLiipasin 4 года назад
Looks very good. Was actually surprised, DIY lips does not normally look that good, looks like you ordered that from some company!
@HQGARAGE
@HQGARAGE 4 года назад
Thank you 🙏 I appreciate that 🙏🙏
@kylenaidoovlogs3398
@kylenaidoovlogs3398 5 лет назад
Been waiting for a video like this bro I had the same idea in my head to make one keep up the great content 👍❤️
@HQGARAGE
@HQGARAGE 5 лет назад
Thanks Bro, such an easy and in expensive modification.
@allysarae103
@allysarae103 3 года назад
I love it ! I can’t find any solid lips for my e60 and this looks perfect ! What was the thickness and size of the sheet itself
@HQGARAGE
@HQGARAGE 3 года назад
I used 3/16” for mine. Thank you for the comment 🙏🙏🙏
@zandas76
@zandas76 4 года назад
nice job
@HQGARAGE
@HQGARAGE 4 года назад
Thank you 🙏
@Bricked_TC
@Bricked_TC 2 года назад
What size sheet did you use and what was the thickness? Love how this came out looks awesome
@HQGARAGE
@HQGARAGE 2 года назад
2ft x 8 ft was the sheet size and it was 3/16” thick
@weiweieeiwei6656
@weiweieeiwei6656 3 года назад
Amazing
@HQGARAGE
@HQGARAGE 3 года назад
Thanks 🙏
@brandongoberdhan7742
@brandongoberdhan7742 4 года назад
Awesome
@HQGARAGE
@HQGARAGE 4 года назад
Thanks 🙏🙏
@mohe81
@mohe81 Год назад
Great work! Looks really nice, and the fins add a lot to it. Only thing I would be worried about is that it is just mounted to the bumper, is it not a bit flappy, when you are going fast? Most ones I saw are much longer and even connected to the frame. How was your experience so far?
@HQGARAGE
@HQGARAGE Год назад
I didn’t have any issues to be honest. Being that it is for looks it’s been perfect
@davishernandez4938
@davishernandez4938 Год назад
Much respect!
@HQGARAGE
@HQGARAGE Год назад
Cheers 🍻
@davishernandez4938
@davishernandez4938 Год назад
@@HQGARAGE will this save gas mileage?
@HQGARAGE
@HQGARAGE Год назад
Nope, won’t save gas ⛽️ at all
@davishernandez4938
@davishernandez4938 Год назад
@@HQGARAGE does it give you stability?
@HQGARAGE
@HQGARAGE Год назад
It does increase downforce on the front tires
@1lobochris
@1lobochris 3 года назад
Dude first of all that is so well done great job!!! it looks amazing! I am planning on doing this to my 2010 Roush Mustang. I have two questions. where did you get the material from and what do you finish sanding it down with for that smooth edge?
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏 I am about to drop another Vid like this on making one for my M3. I got the material from a local plastic shop here in Calgary and I just used an orbital sander with 320 grit sand paper
@1lobochris
@1lobochris 3 года назад
@@HQGARAGE I’m just gonna have you make mine haha 😂 send you design idea soon !!
@therhino9661
@therhino9661 3 года назад
Wow!! GREAT, easy to follow video. I've been wanting a front splitter for my Charger. But some of the prices out are ASTRONOMICAL for something with quality, and/or is not going to fly off after you hit 2nd gear. And for showing the ease of how you turn up the sides too? I'M DOING THIS (LOL). After viewing several of your other videos, you've just gained another subscriber. I look forward to seeing more of Vlogs, and video uploads. (Side note: What carbon material did you use for the splitter, by the way? Please?)
@HQGARAGE
@HQGARAGE 3 года назад
Thanks for subscribing and watching some of my videos. I truly appreciate that. The Carbon material is actually and ABS plastic that had a carbon Fiber imprint stamped into the plastic to give it the carbon look. I have been told it’s nearly impossible to find anywhere
@therhino9661
@therhino9661 3 года назад
@@HQGARAGE Some aluminum from Home Depot, and a carbon fiber wrap it'll be then LOL. Thanks again for your reply. Much appreciated :)
@autogeek23
@autogeek23 4 года назад
Is this for mostly looks? Hopefully you got the rods and connected the splitter to a the chassis/Core support to support the splitter.
@HQGARAGE
@HQGARAGE 4 года назад
It is for looks, It fills the gap when the car is completely aired out.
@gswilliams.9063
@gswilliams.9063 3 года назад
Dude you are freakin awesome
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏 I appreciate that
@gswilliams.9063
@gswilliams.9063 3 года назад
HQ_BMW of course man! I’d pay you to do this to my car you’re super talented
@KiNOSTi
@KiNOSTi 4 года назад
Siiiick
@Shadowghost52
@Shadowghost52 3 года назад
🐐
@arturorodriguez7564
@arturorodriguez7564 3 года назад
thanks for the video quick question where did you get the abs plastic?
@HQGARAGE
@HQGARAGE 3 года назад
Thanks for watching, I got is from a local plastic supplier here in Calgary Ab
@antiricergt
@antiricergt 2 года назад
How much was the ABS plastic and how thick did you use? I’ve not been able to find any. I thought about using aluminum like a big construction sign then copying how you made the spilitter.
@larrybettencourt5641
@larrybettencourt5641 Год назад
Hello I think you did a great job!! 👍👍👍 Can you make one for me for my 2022 dodge challenger, scat pack wide body ?? Ill pay you
@jockolacko8181
@jockolacko8181 4 года назад
Wow man this is amazing, would you be able to make one for my Range Rover if i paid you for it
@HQGARAGE
@HQGARAGE 4 года назад
I think we could definitely work something out 👍
@reviewstestdrives779
@reviewstestdrives779 Год назад
Any tips on where to find the best deals on pressed carbon fiber? I see some options on Amazon.. what do you recommend sorry if I missed that on the video.
@HQGARAGE
@HQGARAGE Год назад
The company I used has asked that I stop sending them people looking for it. So at the moment I do not.
@ryanlagerquist6754
@ryanlagerquist6754 3 года назад
Great video! I'm looking to make one too. Where did you get the abs sheet with the carbon fiber and what's the thickness of the sheet? Keep up the good work! Thanks!!
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏 I got it from a local plastic shop here in Calgary. It was 3/16” thick. Thanks for the kind words.
@colinrussett5163
@colinrussett5163 2 года назад
Would love to know the name of the shop. In Alberta also and wanna make a splitter for my srt10.
@HQGARAGE
@HQGARAGE 2 года назад
Just Google plastic shops in Calgary and there are only a few. I won’t support or shout-out the shop anymore after the last interaction and them telling me to stop directing people from RU-vid their way.
@linusthyni9426
@linusthyni9426 9 дней назад
Do you have any recommandaton of how thick the plastic should be?
@wansolo2216
@wansolo2216 4 года назад
At 6.00 mark, what does that thing called?
@oskarlizarraga3342
@oskarlizarraga3342 3 года назад
Nice job bro! Looks nice. I just wanna give my humble opinion. Could you have made it bigger so you can mount it to the chassis? Maybe it would have more stability.
@HQGARAGE
@HQGARAGE 3 года назад
Thanks Man and yes I agree it could have been extended to attach to the chassis for sure. I actually ended up trimming an inch off and cut the wings off and it was rock solid. It was also just for show and would fill the gap between the bumper and the ground when I aired out.
@oskarlizarraga3342
@oskarlizarraga3342 3 года назад
@@HQGARAGEIt definitely looks real good. Im gonna have to try to make one myself using your method. I have a cadillac ats coupe, and we basically have no aftermarket parts. Everyone buys the same ebay front splitter lol.
@Al-ch4vl
@Al-ch4vl 2 года назад
Nice job ! Where did you get the carbon fiber stamped abs sheet?
@HQGARAGE
@HQGARAGE 2 года назад
From a local plastic shop
@MustangGuy1996
@MustangGuy1996 2 года назад
whats the best way to drill a hold in the abs plastic to put the splitter rods in? wouldn't the abs crack around the drill hole when drilling?
@HQGARAGE
@HQGARAGE 2 года назад
I just used a drill bit and never ever had a cracking issue and I can tell you the splitter has seen some major abuse.
@Thatjewnick
@Thatjewnick 2 года назад
Great job man I went cheap and bout eBay plastic splitter for my car and we’ll I cracked it coming onto a gas pump island I wanna make my own outta sheet metal but the stuff you used looks great! Where can you find that at?
@HQGARAGE
@HQGARAGE 2 года назад
Thank you 🙏 I just googled ABS Plastic near me on Google and found a local plastic supply company
@havvk5002
@havvk5002 5 лет назад
really struggling to find this carbon abs sheet, is there a link available?
@HQGARAGE
@HQGARAGE 5 лет назад
Hey I got it from this place plasticworksinc.com
@djpacis3570
@djpacis3570 10 месяцев назад
Where did you get he carbon sheet and abs ?
@2amNerd
@2amNerd Год назад
For anyone else that ever finds this in the future, do NOT EVER cut Carbon Fiber without wearing a respirator. Once cut the fiber dust are like tiny floating spears that once inhaled, get stuck in your lungs and they do NOT EVER COME OUT. Not trying to shame the video, as most people don't know this, but never ever do it like this please.
@HQGARAGE
@HQGARAGE Год назад
This is absolutely true when working with real Carbon Fiber. The ABS plastic with CF print on it is NOT actually carbon Fiber
@nexgenjtf9889
@nexgenjtf9889 4 года назад
Ware u get the plastic sheet?
@stevenlacy4070
@stevenlacy4070 5 лет назад
Hey, I loved how your splitter turned out man. I've searched the internet and called around but wasn't able to find the material you used. I was hoping you could tell me where or how you found that material??
@HQGARAGE
@HQGARAGE 5 лет назад
Hey, Thank you I appreciate that. I went to a local shop here and went to buy Black ABS plastic and they showed me the CF looking stuff. Let me see if I can get you a Part Number.
@c_losgarage71
@c_losgarage71 4 года назад
I'm interested as well
@c_losgarage71
@c_losgarage71 4 года назад
@@HQGARAGE I'm interested as well
@HQGARAGE
@HQGARAGE 4 года назад
I found my receipt and I got the material from Plastic Works Inc in Calgary AB www.plasticworksinc.com and the product code is 01CH and the description is 3/16” Carbon Fibre ABS
@Joshk007
@Joshk007 3 года назад
Where’d you get the plastic sheet at?
@Dark_insidious
@Dark_insidious 3 года назад
What size of carbon fiber pressed abs plastic do you use?
@HQGARAGE
@HQGARAGE 3 года назад
3/16” and the piece was 2’ x 7’
@dXPenguinXb
@dXPenguinXb 2 года назад
I want to do this to my car, I have a Ford Fiesta SE. it doesn't have such a fancy front bumper, and has a rubber air dam underneath the bumper. Do you reckon I should build my splitter off the bottom of the air damn, so that I get the aero effects the splitter are supposed to bring?
@HQGARAGE
@HQGARAGE 2 года назад
I would do it on the bottom of the bumper. I don’t think the air dam would be strong enough to support the Splitter.
@dXPenguinXb
@dXPenguinXb 2 года назад
@@HQGARAGE thanks for getting back to me! I appreciate your input! My plan in tandem with this is to also build an underplate for my car, starting at the level of the rubberized air dam, supported by equally long brackets. If I build it from that, I was thinking to use ABS and have it extend past the edge of the airdam. I mostly am curious of if the splitter would even be effective and do splitter stuff if I built it higher off the bumper. I know that'd look cleaner, too. I just don't know enough as to the aero effects of both. Thanks so much for your time, I appreciate you!
@ap1234family
@ap1234family 4 года назад
What did you use to heat it up? Like you did on the fins? A torch or a heat gun?
@HQGARAGE
@HQGARAGE 4 года назад
Ya I used a heat gun to heat it up and make it bendable.
@spudlet366
@spudlet366 3 года назад
How thick was the plastic sheet? Great vid btw!
@HQGARAGE
@HQGARAGE 3 года назад
Thank you 🙏 The sheet was 3/16” thick
@matheuscordeir0070
@matheuscordeir0070 3 года назад
Muito massa 👏👏 toop
@HQGARAGE
@HQGARAGE 3 года назад
🙏🙏🙏🙏🙏
@theopunisher3021
@theopunisher3021 4 года назад
Will the self taper bolts holds the splitter enough you think ?
@HQGARAGE
@HQGARAGE 4 года назад
Nope 👎🏻 I ended up redoing the splitter after I got the bumper painted. I used bolts, washers and Nuts to secure it down. You can see what I did in this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sZHFNpYbtUc.html
@patriotkieler9750
@patriotkieler9750 3 года назад
Where did you get the carbon pressed abs materials??
@HQGARAGE
@HQGARAGE 3 года назад
I got it from a local plastic supply shop.
@neilcarlullbricht3772
@neilcarlullbricht3772 4 года назад
Hello. Great job sir, looks like its an oem ///M Performance part! Quick question: how thick should the ABS Plastic be? And have you had any issues with breaking since installation. Thanks in advance!
@HQGARAGE
@HQGARAGE 4 года назад
Thank you 🙏 I used 3/16” thick abs and it has held up perfectly. It’s still on the car and looks perfect still
@neilcarlullbricht3772
@neilcarlullbricht3772 4 года назад
@@HQGARAGE Thanks again sir for the reply.
@HQGARAGE
@HQGARAGE 4 года назад
My pleasure 🙏🙏
@jasonemile7163
@jasonemile7163 3 года назад
@@HQGARAGE thanks for the upload and thanks for answering his question
@HQGARAGE
@HQGARAGE 3 года назад
My pleasure 🙏 thanks for watching
@dominicnicklyn7897
@dominicnicklyn7897 3 года назад
I got a 2013 sonic hatchback that I'm putting money into and I want a fiberglass sheet or one that is not pressed. Any ideas?
@HQGARAGE
@HQGARAGE 3 года назад
I would look into getting a sheet of Aluminum or a material called e-panel. APR I know makes Aluminum ones for the strength and durability but also very light
@TrackFactory
@TrackFactory 3 года назад
does that shop have a website i can order from? i don't see any places around here that sell glossy abs
@HQGARAGE
@HQGARAGE 3 года назад
Unfortunately they do not have a website and they would like people to stop calling asking for the material
@brightlocks
@brightlocks 4 года назад
Where did you get the carbon fiber plastic ??
@HQGARAGE
@HQGARAGE 4 года назад
I found my receipt and I got the material from Plastic Works Inc in Calgary AB www.plasticworksinc.com and the product code is 01CH and the description is 3/16” Carbon Fibre ABS
@o1racing03
@o1racing03 3 года назад
You can't use threaded rod and have them adjustable without removing one end. You need a left hand thread on one end.
@rueben68
@rueben68 4 года назад
Hey bro what’s the name of the material you used for the splitter? TIA
@HQGARAGE
@HQGARAGE 4 года назад
It’s called ABS plastic with Carbon Fiber impression.
Далее
$40 Side Skirt Extensions! DIY
10:35
Просмотров 136 тыс.
One Way to Fix a Broken Car Speaker
6:40
Просмотров 113
The Proper Way to Design a Chassis-Mounted Splitter
11:35
How To Make a Race Car Splitter With Alumalite: EASY!
16:45
Making a Custom Diffuser!! Subaru BRZ
20:58
Просмотров 152 тыс.
DIY Custom Bumper Spoiler from Foam and Fiberglass
8:56
BMW F8x Front AERO DIY SPLITTER
17:26
Просмотров 5 тыс.
How to make a custom splitter for your car.
11:58
Просмотров 51 тыс.
Make a Front Splitter Properly
14:08
Просмотров 15 тыс.
Помыла и машину, и водителя
0:18