How to Make Charcuterie Boards Using Clear Acrylic Templates

Подписаться 20 тыс.

Просмотров 93 тыс.

50% 1

Find the acrylic templates and other items here:
www.bruceaulrich.com/shop
In this video, I'm using some acrylic templates with a router to create different shaped charcuterie boards. It's easy to mix and match the different handle styles with different boards. These clear templates make it easy for you to work around any voids in the wood or orient the grain exactly like you want it.
Support my channel!
/ bruceaulrich
TOOLS & MATERIALS: (affiliate links...shopping using these links helps support my channel & costs you nothing)
Mahoney's Walnut Oil Finish: amzn.to/3ThJWbN
Starbond CA Glue: www.starbond.com/?rfsn=272403...
Painter's Tape: amzn.to/38y2EpY
Drill & driver - amzn.to/2C0JDfa
Paddle bits: amzn.to/349SIAN
Flush Trim Bit: amzn.to/3nNrbhb
Trim Router: amzn.to/3mKgBWU
Full Sized Router: amzn.to/3nL0AkX
Shinto Rasp: amzn.to/38xlA8s
Random Orbit Sander: amzn.to/38y2EpY
Tripod I Love: amzn.to/2wT3vmk
Rode Wireless Mic: amzn.to/2RCJo2C
iPhone Tripod Holder: amzn.to/3eyXkFf
Camera: amzn.to/2wUxv1b (I have older model of this)
Glowforge Laser Engraver: Save up to $500 when using my link glowforge.us/r/GwnI7W
MY PODCAST: WE BUILT A THING
I do a podcast with a couple of other RU-vid makers called WE BUILT A THING. Look for it in the app store of your choice or stream from the link below or on Spotify! webuiltathing.libsyn.com/
FOLLOW:
/ brudaddy
/ webuiltathing
/ bruceaulrich. .
/ brudaddy
www.instructables.com/member/...
WRITTEN ARTICLE FOR THIS PROJECT:www.bruceaulrich.com/
Help me grow my channel!
-Thumbs up: tells RU-vid you liked it and they show it to more people
-Subscribe + bell icon: Notifies you of new videos immediately
-Share the video: This really helps me get in front of new people
THANK YOU FOR WATCHING!
Music:Epidemic Sound
#charcuterie #servingboards #templates

Хобби

Опубликовано:

22 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 201

@MrHighflyingclive Год назад

This looked like an interesting video. Sadly, I had to switch it off after a couple of minutes because of the intrusive, annoying, and totally unnecessary music.

@BruceAUlrich Год назад

Sorry you have such picky requirements for your FREE entertainment.

@MrHighflyingclive Год назад

@@BruceAUlrich I'm sorry that you are unable to accept constructive criticism.

@BruceAUlrich Год назад

It’s not constructive when you use pejorative words like “annoying.”

@MrHighflyingclive Год назад

@@BruceAUlrich Perhaps you should ask yourself if the music did, in any way, make your video more instructive, enjoyable or informative. If the answer to any of these questions is no, then ask yourself what purpose it serves. If your content is good, it will not require any musical "enhancements". But if your content is poor, no amount of bolted-on music will improve it. A further problem is that we all have differing tastes in music. Whatever music you choose, you'll not please everybody, so it's probably best not to alienate the portion of your audience that doesn't share your taste in music.

@chris3m98 Год назад

@@BruceAUlrich Both of you 2 are right. Bruce, I have a problem with any music. My problem is I now have hearing aids & when you are talking & the music is playing I can't understand what you are saying. It is amost like when people that wear masks are talking I can't understand what is been said. The TV stations do the same thing 48 hours, CNN, 60 min. when they run their stories, I now no longer watch them as I don't care for CC. P.S. My opinion, "2 rights don't make a wrong"? 😷😊

@SawdustandStuff 3 года назад

Great video. Super slick and manageable for any person who wants to make their own!

@BruceAUlrich 3 года назад

Appreciate that! That was my hope...or just buy my templates. ha ha

@CrossCutCreations 3 года назад

Those boards were a lot of fun! Great work, Bruce.

@BruceAUlrich 3 года назад

Appreciate that! I like all of the different styles.

@artandcreationsbyyvettecre2308 2 года назад

I love all the unique shapes. Beautiful work

@BruceAUlrich 2 года назад

Thank you!

@TheGrantAlexander 3 года назад

I really like the idea of using acrylic to make the templates great tip Bruce

@BruceAUlrich 3 года назад

Thanks so much! It's cool to be able to see exactly where you're placing it.

@MakerCuisine 3 года назад

Those are beautiful looking boards Bruce, I like the zebra wood the best, the organic shapes give them a really great look

@BruceAUlrich 3 года назад

Thank you! I think the zebrawood is my favorite also!

@EthanCarterDesigns 3 года назад

Such an awesome way to batch out a ton of boards! I really like how you hacked the template for the long board! Very clever blue tape trick from Drew too...banked that one! I'm not going to be too original, but I definitely have to go with the zebra wood!

@BruceAUlrich 3 года назад

Yeah, I think those were my favorite too. They're just so cool and different looking! That blue tape loop trick worked really well. Thanks for watching, Ethan!

@123024119 3 года назад

These boards look great, nice job!

@BruceAUlrich 3 года назад

Thanks so much!

@bytesizedengineering 3 года назад

Love those funky shapes!

@BruceAUlrich 3 года назад

Thanks, Zach! They were fun to create!

@stephenmcgeown Год назад

Nice video, well produced and informative. I liked seeing your process and what a wonderful way to make use of the various woods you had stored.

@BruceAUlrich Год назад

Thanks so much for the kind words & for watching!

@TwoMooseDesign 3 года назад

These all look awesome!

@BruceAUlrich 3 года назад

Thanks so much! They were fun!

@brianward772 Год назад

I like the designs of your boards. Good job!

@BruceAUlrich Год назад

Thanks so much!

@JamesMadeKY 3 года назад

Great work as always. My wife liked the zebra wood board the best. I like the color of the bubinga.

@BruceAUlrich 3 года назад

You just like saying bubinga, don’t you? I do too. Ha ha. I think the zebra wood is my favorite also!

@JamesMadeKY 3 года назад

@@BruceAUlrich Guilty! Bubinga is a fun word to say. I've not worked with it, how was it to mill and use the templates on?

@BronkBuilt 3 года назад

Great idea on using the acrylic templates.

@BruceAUlrich 3 года назад

Thanks so much! They worked really well.

@terryraines9952 2 месяца назад

thank you for the video, now I know how to and just ordered two templeats from Crafted Elements and bottle opener templets as well

@TaaffesWorkshop 3 года назад

Can't wait to get mine and start grinding these bad boys out. Great video, Bruce! Happy Holidays to you and your family, sir.

@BruceAUlrich 3 года назад

Hey Tim! Thanks! Appreciate the kind words. Merry Christmas to you guys!

@tomtimmons2228 Год назад

Great procedure using ca glue and tape. Thanks

@BruceAUlrich Год назад

Glad it was helpful! I use that method all the time.

@miamited69 2 года назад

A lot of good tips and information. Thank you

@BruceAUlrich 2 года назад

Glad you found it useful! Thanks for watching!

@uknowulikethat4042 3 года назад

oh man they all look great, like the templates you made, I've done a few of these freehand, instead of flush trimming the edge I just sanded and burned the edges with a small blow torch, the oak one caught my eye. have a great 2021

@BruceAUlrich 3 года назад

That oak one is sharp! Sounds like a pretty cool method you used to burn the edges

@jimhatch5873 3 года назад

Nice video. I'm jealous of all the room (& good) in your shop 😁

@BruceAUlrich 3 года назад

Thank you!

@GregsGarage 3 года назад

Great looking boards Bruce! Merry Christmas!

@BruceAUlrich 3 года назад

Thank you, sir! And a very Merry Christmas to you and your family, Greg!

@andrewbrown8148 2 года назад

Great video, Bruce~! I like the Zebra Wood board, but that gnarly White Oak one looks great~! I also like the "tape tip" that you threw in from Drew. Will have to remember that one. Thanks~!

@BruceAUlrich 2 года назад

Yeah, that was some wild white oak. I agree with you. Thanks!

@CoffeyCustomBuilds 3 года назад

Very nice job on those man!

@BruceAUlrich 3 года назад

Appreciate that!

@mikeeldridge637 3 года назад

Very cool !!! Merry Christmas to you and your family .

@BruceAUlrich 3 года назад

Thanks, Mike! A very Merry Christmas to y'all too!

@stuffsethmakes 3 года назад

Love the boards! I've got a video mid-edit that i started earlier this year making an order of 36 of my Monroe serving boards. Coming soon! I'm chasing you Bruce!! 😆👊🏻

@BruceAUlrich 3 года назад

Ha ha! Looking forward to seeing that! Thanks, Seth!

@chrisjmiller6 2 года назад

great video! Thanks for sharing your tips

@BruceAUlrich 2 года назад

Appreciate that, Chris!

@OakHillMillworks 3 года назад

Nicely done, Bruce. You made it look easy! I would love to have a spindle sander in my shop!

@BruceAUlrich 3 года назад

The spindle sander really helps with some of those tight curves. There was still a lot of hand sanding. I can’t imagine without the sander! Thank you!

@xzaviercalvin8734 2 года назад

I dont mean to be so offtopic but does anybody know of a method to log back into an Instagram account? I was stupid lost my account password. I love any help you can give me.

@gunnerjonah7183 2 года назад

@Xzavier Calvin Instablaster :)

@xzaviercalvin8734 2 года назад

@Gunner Jonah Thanks for your reply. I found the site thru google and im in the hacking process now. I see it takes a while so I will reply here later when my account password hopefully is recovered.

@xzaviercalvin8734 2 года назад

@Gunner Jonah It did the trick and I now got access to my account again. Im so happy:D Thanks so much you saved my account !

@DesignCraftWorkshop 3 года назад

Great video Bruce! I really need to get me an edge sander.

@BruceAUlrich 3 года назад

Thank you! It has been a big time saver. There are many times I go right to it.

@derekdodson5623 3 года назад

Well done. Thanks

@BruceAUlrich 3 года назад

Thank you!

@douglasmoffatt8022 Год назад

The curly oak is a good choice - besides being interesting, it seems to reflect the fact that these are working kitchen/dining utensils. AND each one can lock up CO2 for decades, just when we need that the most! Now we need to get billions of them in use! O

@BruceAUlrich Год назад

I love the curly white oak ones

@mountainviewturning5319 3 года назад

Very nice 👍

@BruceAUlrich 3 года назад

Thanks so much!

@richardross5195 2 года назад

Thanks!

@artandcreationsbyyvettecre2308 2 года назад

Crazy curly white oak my favourite

@BruceAUlrich 2 года назад

I really like those also!

@gregoryboden5139 2 года назад

Bruce, Herllo from Canada! My favorite wood to work with is Birds Eye Maple. If you can get some of that, it is an amazing wood to work with!. Thanks for your inspiration.

@BruceAUlrich 2 года назад

Thank you for watching! I love birdseye maple too!

@eduardozepeda3469 2 года назад

Hi Bruce, ✌🏻New suscriber!

@BruceAUlrich 2 года назад

Hi! Thanks!

@davesdigitalnomadlife 2 года назад

Great video Bruce! I love your templates! I have the same bandsaw I believe - 30th Anniversary Grizzly. I added the 12" riser block to it and I have not regretted it even once. It's worth the price. On the finish side, have you ever tried Watco Butcher Block oil & finish? I just picked some up today to try out. Great looking boards. Too good looking to pick a fav!!!

@BruceAUlrich 2 года назад

So hard to pick! Ha ha. That’s a great bandsaw. I’ve not used that finish. I hear good things though!

@bmbell1919 5 месяцев назад

Awesome video. What's the purpose (and type) of tape you used before pouring the epoxy for the knot? Thanks!

@grumpywoodchucker 3 года назад

Merry Christmas, Bruce! Great process.

@BruceAUlrich 3 года назад

Thanks so much! Merry Christmas to you also!

@AngieWilliamsDesigns 3 года назад

I love these boards. You had some great material and did a great job of using the material on hand. I also love the templates. I'm curious if you have a digital version of the files you can sell? I have access to a laser and cnc and would love to make some.

@BruceAUlrich 3 года назад

Thanks, Angie! I appreciate that! Let me see what I can do. I bought the commercial rights to these so I can make physical products to sell but I can’t sell the files themselves.

@nathanielhorn1248 3 года назад

@@BruceAUlrich is it possible to purchase the digital files from the place you purchased the commercial rights from?

@BruceAUlrich 3 года назад

@@nathanielhorn1248 Yeah, probably. I found the user on Etsy. ;)

@scotschlinger3975 Год назад

Great job. Like all the different templates. What laser engraver do you have?

@BruceAUlrich Год назад

Thank you! When I made this video, I had the Glowforge Basic. I’ve upgraded to a 150 watt machine now.

@ronnorris1504 Год назад

love the white oak but they all look great. just wondering how or where you got the templates to cut out the acrylic templates. Thanks for sharing the video

@BruceAUlrich Год назад

Thank you! I really liked the white oak ones also. Some of them I purchased and then modified and some were drawn.

@kate.creates Год назад

Thank you so much for this amazing video! I loved the music and the way you synced up the video to the beat at 3:23 was top class. [Try not to pay attention to rude people if they can't appreciate it...] **Quick question: would you recommend Odie's to finish a board over butcher block oil? Which is more likely to last longer over more usage of the charcuter board? THANK YOU AGAIN!

@BruceAUlrich Год назад

Well, thanks for the kind words! I've never used butcher block oil, so I don't really know how to compare that. I would NOT use Odie's Oil any longer...the owner/founder is a real piece of work, and looks down on his typical customer base. I would probably use some Mahoney's walnut oil finish...I use that on a lot of my other cutting boards. A lot of bowl turners use it also. They distill it so there is nothing in it that would cause a nut allergy. I've got a link to it in my description. Those links help me out a bit if you shop with them....at no cost to you. ;)

@kate.creates Год назад

@@BruceAUlrich great, thank you again for the useful information! cheers

@xXxJonnyLavaxXx 3 года назад

Great project. Where did you get your acrylic? I have a Glowforge too and want to make up some templates. Their materials are a little high so looking for a more cost effective alternative.

@BruceAUlrich 3 года назад

I buy entire sheets of it and break it down myself. I pick this stuff up locally. You probably have someone near you that is a plastics dealer.

@BigBilly1958 2 года назад

Nicely done. Ultimately what was the thickness of your boards when you you used the spiral flush trim up cut bit?

@BruceAUlrich 2 года назад

They’re about 3/4” or a hair thicker.

@HWoodCreations 3 года назад

Well done! I like those templates. What is the thickness of your boards?

@BruceAUlrich 3 года назад

Thank you! Most of these are about 1” thick

@RobKrar1 Год назад

Fun video, lots of great tips. Could you tell me more about how you laser cut the templates? Power, speed, number of passes? I tried cutting 1/2" cast acrylic but after numerous passes it still wasn't cut through. Thanks!

@BruceAUlrich Год назад

For this video, I was using a Glowforge and they have some recommended speeds and power settings in their software. I’ve got a different laser now and it is totally different. I seem to have pretty good success with elevating the acrylic off of the honeycomb bed with some more pieces of acrylic and making multiple quick passes. I’ve never tried cutting 1/2” though...I bet that can be tricky.

@wwfera00 3 года назад

After you finish wiping with oil, do you let it dry or keep wiping until the oil is completely absorbed into the wood and no wipe streaks are visible?

@BruceAUlrich 3 года назад

For this stuff, it says to buff it in with a white non-scratch pad. Then let it sit on there for about 45 min. Then, buff off the excess with a clean cloth until it is dry to the touch.

@sar2547 2 года назад

Beautiful boards! I'm looking to buy 5 or 6 templates from your site. Any chance to get a promo code?

@BruceAUlrich 2 года назад

Shoot me an email so we can talk more. Or just submit it on my website. Bruceaulrich.com

@dougwestberry3093 5 месяцев назад

Nice, comprehensive video. I do have one question... What is the thickness of these boards? It's difficult to tell from the video but they look to be about an inch, maybe 7/8". (That would determine the thickness of the boards that I need before resawing them.)

@BruceAUlrich 5 месяцев назад

I don’t recall the exact thickness at this point. I would say most of them were either 3/4” or 7/8”, you’re right. Thanks for watching!

@lawrencep5427 3 года назад

Bruce....wonderful video explaining your charcuterie board build. I noticed you have a 14 inch grizzly bandsaw with at least a half inch blade. I also have a 14 inch grizzly with a 6 inch riser block. Unfortunately I get a lot of vibration when I resaw wood with a wider blade....and get drifty cuts. What blade brand and size are you using? What tires do you have on your bandsaw. And can you think of anything else that's causing my vibration/drifty cuts. Perhaps you've had the same issue and solved it....thanks!

@BruceAUlrich 3 года назад

Thank you! Sorry to hear you're having vibration with your bandsaw. I do not have the riser block on mine, so I wonder if it is anything with that. I have the stock tires on mine. I think this blade is 3/8", but it might be 1/2". I buy my blades on amazon. There's a brand, Olsen, that's been around for a long time and has really good, inexpensive blades. My first thought about yours might be that it needs more tension, if it is drifting. Or maybe the blade is dull. Mine will start to drift a lot when it is getting dull.

@lawrencep5427 3 года назад

Thank for your quick reply!

@peterkretschmer3039 2 года назад

Hi, tried to buy a couple of templates in the UK, no can do, no option to ship to UK

@MrKaebee 2 года назад

bruce, hello where do you get all the different woods, i live in a little farm community in North Carolina, any help with this will be appreciated

@BruceAUlrich 2 года назад

Here, there and everywhere. Ha ha. There is probably a lumber supplier or two writhing an hour of you, I would bet.

@facebookmakesmesick 2 года назад

Need those templates

@joshuaglipa8281 2 года назад

Hey Bruce what brand laser cutter do you use to make templates?

@BruceAUlrich 2 года назад

I have used a few different ones over the years. I’ve used a Glowforge, a 60w, a 80w and a 150w.

@joeburgoni9772 Год назад

I would like to buy some of your templates. How can I find your store site?

@BruceAUlrich Год назад

Hey Joe! I've got them on my website here: www.bruceaulrich.com/shop

@MatthewReynolds Год назад

Good stuff. What's your method to make the templates?

@BruceAUlrich Год назад

Oh, I laser cut them out of acrylic like you saw in the video.

@csranch2000 Год назад

Being that they are face grain do you worry about cupping or bowing? I noticed you don't put feet on them for air circulation. I am wondering if you have found they aren't necessary?

@BruceAUlrich Год назад

Not really. I’ve sold some of them but the ones I’ve kept, I’ve had no issues.

@paulwells1817 2 года назад

Great stuff Bruce. What model of DeWalt Planer do you use, and same for Jointer?

@BruceAUlrich 2 года назад

I have the DeWalt 735 and my jointer is a Grizzly 6” with helical head.

@paulwells1817 2 года назад

@@BruceAUlrich Thank you so much...talk about a quick response! Just curious, where are you located?

@BruceAUlrich 2 года назад

I’m just outside of Lexington, Kentucky

@xavieraraujoalarcon3105 3 года назад

Bruce, how long mineral oil takes to dry into the board and then, when may use it?. I think mineral oil is less risky for anyone who is allergic to natural ones.

@BruceAUlrich 3 года назад

Mineral oil never fully dries/cures. It always seems to stay a bit oily. The walnut oil I use is distilled to remove the proteins that people with nut allergies react to. There are other food safe finishes though, like this Odie’s Oil I used.

@alfredsanturri922 2 года назад

Great job great video how do I order the acrylic patterns

@BruceAUlrich 2 года назад

Thank you! I’ve got a link to my shop in the description. Appreciate the kind words!

@michaelladd9899 2 года назад

What machine are you using to create/ build the acrylic templates?

@BruceAUlrich 2 года назад

I cut mine on a laser engraver/cutter.

@jquest90 Год назад

Bruce: I enjoyed your charcuterie board video. I am interested in your templates. On your website it lists it for $39.99. Is that for 1 template or a set of them?

@BruceAUlrich Год назад

Thank you! That’s for 1 but send me an email and I can generate a coupon for purchasing multiples I you want.

@waterlilly62lori 5 месяцев назад

Would have loved to see the Lazer engraver

@BruceAUlrich 4 месяца назад

I should have shown it!

@BruceAUlrich 2 месяца назад

Here you go: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EtOVsR079qc.htmlsi=Pmw0z0P8hI9gvAFZ

@eladsinay6914 2 года назад

what type of bit did you use to do the inside of the handles?

@BruceAUlrich 2 года назад

I’ve got it linked in the description as “Flush Trim Bit.” It is a nice bit!

@ChristianMuneraP Год назад

Hi, where can I find your template? tks from Colombia

@BruceAUlrich Год назад

Hi there! I've got them linked on my website in the video description

@CreativeCustomDesigns 9 месяцев назад

Hi Bruce....I just came across this video.....we have a laser machine....would you sell us the SVG for your templates? We have a few sheets of acrylic that we could use.

@spiritofscouse 2 года назад

Can a template be made out of quarter inch plywood? Thanks

@BruceAUlrich 2 года назад

I'm sure it could. Plywood is not the best choice from what I've seen though. It kind of makes the bearing on your router take some grooves.

@johnritchie3889 3 года назад

curious as to why you didn’t just cut the boards out on the cnc router? Seems like it would have eliminated some steps.

@BruceAUlrich 3 года назад

I’m sure it would have but I didn’t have one. And a lot of people done, so I wanted to show a different way to do it.

@ContractorJohn 3 года назад

I am sure you meant to say you should use Food Grade Mineral Oil because regular Mineral Oil will turn rancid after a while... Otherwise great video and tip with the tape and CA Glue.

@BruceAUlrich 3 года назад

This is the stuff you can get from a pharmacy so it is food grade.

@facebookmakesmesick 2 года назад

I just learned that trick by accident...wetting baord and resanding and it's stays fine...first few I didn't know why they felt rough again after oiling ect ect

@BruceAUlrich 2 года назад

Yeah, that’s called raising the grain. Anytime your piece will come into contact with water like a cutting board, it will feel rough if you do not do this.

@facebookmakesmesick 2 года назад

@@BruceAUlrich I know now...leaning process is woodworking is insane..need those templates but the acrylic ones are expensive if you want a variety

@007naumankhan Год назад

great video. on the idea of adding tape to align your template tape, can you not just CA glue the two tapes upside down and then align your boards. so you won't have to remove the extra tape you had to use in between them.

@BruceAUlrich Год назад

Yeah, I think that would have worked well. Thanks for watching!

@tpatrickm1 3 года назад

Is that insulation on your garage door?

@BruceAUlrich 3 года назад

Yeppers. I put it on there a few years ago. Does a pretty good job.

@tpatrickm1 3 года назад

@@BruceAUlrich Cool thanks.

@FredMcIntyre 3 года назад

😃👍🏻👊🏻

@BruceAUlrich 3 года назад

Thanks, Fred!

@VinceEspositoJr 3 года назад

I was hoping you would discuss how you made the templates...

@BruceAUlrich 3 года назад

These were some designs that I purchased.

@VinceEspositoJr 3 года назад

@@BruceAUlrich Thanks.

@skowww 3 года назад

How thick are the boards?

@BruceAUlrich 3 года назад

They range from about 3/4" to a little over an inch.

@dannykfoster8176 3 года назад

Question. Typically what’s the thicknesses of a Charcuterie board. And what types of wood should not be used? Also. I have 50 boards of butternut that’s been seasoned for the last 10 years. Can’t find anyone that would buy it. Can it be considered as a cutting board? Most are 2 1/2 in thick maybe 6 in wide and 6 to 8 ft long. Let me know.

@BruceAUlrich 3 года назад

I’m not that familiar with butternut. I think for serving boards, a lot of woods can be used. You get some people that get pretty down on red oak for cutting boards, but for a serving board, I think even that would be fine.

@dannykfoster8176 3 года назад

Bruce A. Ulrich just a follow up. What would be a appropriate thickness for a Charcuterie board?

@BruceAUlrich 3 года назад

Oh, sorry. Missed that part. I think you can do whatever you want but at least 3/4” would be a good thickness!

@dannykfoster8176 3 года назад

Bruce A. Ulrich thank you.

@markbranch6427 3 года назад

How thick is that acrylic?

@BruceAUlrich 3 года назад

It is 1/4” acrylic

@ericawilliams18 2 года назад

Do you have a video on how to make your own template ?

@BruceAUlrich 2 года назад

I don’t have a separate one about that. Maybe it’ll be one I do in the future.

@ericawilliams18 2 года назад

@@BruceAUlrich it would be highly appreciated by your viewers

@jawright1979 2 года назад

Do you sell the templates?

@BruceAUlrich 2 года назад

Hey Josh! I do...link to my website is in the description below!

@jawright1979 2 года назад

@@BruceAUlrich would you consider making custom ones?

@marcuspoe9353 2 года назад

lol was just thinkin i didnt care for the zebra, maybe to uniform for me :)

@BruceAUlrich 2 года назад

ha ha...different stripes...or whatever. I really like the zebrawood. Thanks for checking out the video!

@marcuspoe9353 2 года назад

@@BruceAUlrich yep sorry man i wouldnt have said anything till at the last you said let me know :) , the timing was just funny to me, nice work though,,, just that 1 lol .

@BruceAUlrich 2 года назад

@@marcuspoe9353 Oh no worries! I always like to hear people’s opinion. Thanks for letting me know!

@joehardy6417 2 года назад

I thought white oak was a no-no for charcuterie boards?

@BruceAUlrich 2 года назад

Nah, especially for charcuterie, it’s fine. It’s really all about cleaning the board well.

@lukepulscher 2 года назад

any chance you sell templates?

@BruceAUlrich 2 года назад

I do sell templates like these! I’ve got a link in the description of the video

@michellewyatt1147 2 года назад

@@BruceAUlrich I would like to buy some templates

@BruceAUlrich 2 года назад

Hi Michelle! You can buy them on my website www.bruceaulrich.com/shop?category=Templates

@BruceAUlrich 3 года назад

Find the acrylic templates here: www.bruceaulrich.com/shop?category=Templates

@wgustavus 3 года назад

Can you add dimensions for the acrylic templates? Thanks.

@BruceAUlrich 3 года назад

@@wgustavus Hey there...I just added the approximate dimensions for each one. Thanks for the heads up!

@devencord 3 года назад

Interesting to watch, but as u should known already, nobody uses wooden boards anymore 😜😂

@BruceAUlrich 3 года назад

Bwah ha ha ha. Good one!

@warrenswarb4118 3 года назад

not true, I sell em everyday

@BruceAUlrich 3 года назад

@@warrenswarb4118 I hear ya! He was joking around...this is kind of a running joke on my podcast, We Built A Thing, and he was laying it on thick. ha ha

@waterlilly62lori 3 месяца назад

You skipped so much of what you did😢

@BruceAUlrich 3 месяца назад

What did I skip?