Тёмный

How to make this beautiful wooden boxes. Easy wooden boxes. Christmas gift ideas 

Sawdust and splinters
Подписаться 28 тыс.
Просмотров 36 тыс.
50% 1

Today we are going back to basics and making a very simple but elegant box. Will rabbet joints and a simple easy to make rabbet lid. This is an easy project you could do for cheap and it only take about 15-20 minutes. For the finish I will be using two of my favorite new finishes #woodworking #woodworkingprojects #woodenbox
IF YOU WOULD LIKE TO SUPPORT THE CHANNEL AND PURCHASE ANY OTHER STUFF THAT I MAKE YOU CAN DO THAT NOW HERE. www.skylerewing.store
========================================================
Affiliate Links
=========================================================
The links in my video description are affiliate links, which means at no extra cost to you, I will make a small commission if you click them and make a qualifying purchase
ColorTone Concentrated Liquid Stain for Stringed Instruments, Tobacco Brown. amzn.to/3PTrYwx
Kreg KMS7102 Table Saw Precision Miter Gauge System - Factory Calibrated - With Miter Gauge Fence & Bar - Miter Gauge for Table Saw. amzn.to/3QajHW2
Peachtree 2271 Saw Blade Storage Rack. Safely Store Up to Eight Saw Blades. Store Table Saw Blades, Circular Saw Blades and Either 10" or 12" Blades. amzn.to/3F7YsOB
Forrest Woodworker II #1 Grind Saw Blade 10", 40T. amzn.to/3LUqbWP
Titebond 4366 Gallon Speed Set Wood Glue. amzn.to/3trTGZE
Titebond Dark Wood Glue, 16 Ounces. amzn.to/3tu98EE
Titebond - Wood Glue, Molding And Trim, 16 Oz, Beige. amzn.to/45qRXRm
Pro Grade - Acid Brushes - 144 Count 3/8" Boar Hair Acid Flux Brushes. amzn.to/48Qyugb
Crocodile Cloth Industrial Hand & Tool Cleaning Wipes - Heavy-Duty 10" x 15" Size Multi-Surface Cleaning Wipes, 100 Count Per Package. Water Based Solution with Extreme Cleaning Power. Safe on Skin. amzn.to/3LXwj0l
Jorgensen 6 inch Bar Clamp Set, 4 Pack Steel F Clamp Light Duty, 300 lbs Load Limited, for Woodworking, Metalworking, DIY. amzn.to/46GC4aG
De-Waxed Super Blonde Shellac Flakes 1 lb. (16 oz.). amzn.to/3F9mVD0
Brooklyn Tool and Craft Shellac Flakes Tiger Amber 1/2 lb. amzn.to/3rUjnBv
EANOSIC Setup Blocks Height Gauge Set, 15pcs Precision Aluminum Setup Bars for Router and Table Saw Accessories Woodworking Set Up, Bars Include Laser Engraved Size Markings. amzn.to/46opugB
Deft Interior Clear Wood Finish Gloss Lacquer, 12.25-Ounce Aerosol Spray. amzn.to/3PQLcTt
3M CP000-6P-CC Sanding Sponge Extra Fine Grit, 3-3/4 in x 2-5/8 in, Black, 6 Count. amzn.to/3RPn85Z

Хобби

Опубликовано:

 

9 окт 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 101   
@brian777999
@brian777999 5 дней назад
Great idea for the box lids ; no need for hinges. I have been trying to hinge my box lids but I only seem to get them correctly fitted 50% of the time. Your method is so much better. I tried it today for the first time and it worked well.
@morrisonsusan
@morrisonsusan 7 месяцев назад
Thank you so much, Skyler, for all the teaching you are doing in these videos; I appreciate your expertise and hard work. The boxes are absolutely gorgeous!
@chrisoliver3851
@chrisoliver3851 7 месяцев назад
Skylar your videos make we want to make boxes. Keep it up Love your work!
@taichigoodness1798
@taichigoodness1798 5 месяцев назад
It is so kind of you for sharing your knowledge!
@flashwashington2735
@flashwashington2735 7 месяцев назад
So many useful tips. I watch twice. Thank you. I can't get over your cedar tulips lid. Really striking. You give so much info, so hospitably in short time. Your enunciation is clear, lilt of you're melodic voice. Well executed demonstration, camera and sound. Do you employ only one camera to minimize edits? You're so productive. God bless. I'm tired good night.
@KSFWG
@KSFWG 7 месяцев назад
I like the way you made the box bottoms and tops. I use the same technique, but at the router table. I usually use box joints, but once in a while I will use rabbets to make the box body.Thank you for your videos!
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Thank you. I love box joints. I usually use the incra box joint jig.
@flashwashington2735
@flashwashington2735 7 месяцев назад
Box joints for boxes. Rabbets for rabbits. 🤣🤣🙏🙏God bless.
@flashwashington2735
@flashwashington2735 7 месяцев назад
I've seen the boxes, and the finishes before. But your execution, fantastic!! Your engravings really pop! Exemplary!! Thanks. God bless.
@joediberardino4419
@joediberardino4419 4 месяца назад
Wow very awesome thank you
@jimhinkle7245
@jimhinkle7245 7 месяцев назад
WOW!!! VERY NICE!!!!
@radarguru566
@radarguru566 7 месяцев назад
What great boxes! Nice idea for Christmas gifts. Thanks for the tutorial.
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
You are so welcome!
@jenda3322
@jenda3322 7 месяцев назад
Velmi skvělá práce, jste fantastická žena Skyler!👍❤
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Thank you Jenda
@Sebastopolmark
@Sebastopolmark 7 месяцев назад
GREAT job Skylar, your videos are really progressing. We always get a few tips and tricks and sourcing for your accessories. Thanks! !! !!!
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Thanks so much!! Happy to help :)
@miked8022
@miked8022 7 месяцев назад
Great tip on marking the saw blade edge. I've not seen that before.
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Glad it was helpful! I use it everyday and have to redraw every week:)
@jeffgass89
@jeffgass89 7 месяцев назад
Great job! Those turned out amazing! Do you have a link to the file used on the nightmare before Christmas lid? Thank you for all of the tips and tricks. Your attention to detail is appreciated.
@ljgault
@ljgault 7 месяцев назад
You've inspired me to make some boxes.Those came out beautiful.
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
You should! Thank you very much
@waynenelson8907
@waynenelson8907 6 месяцев назад
I guess I missed the making of the cover. Do you have a video of that? Enjoy your videos and great ideas. Thank you very much. :)
@samhandwich3965
@samhandwich3965 6 месяцев назад
Agreed I'd really like to see how you went about the laser engraving.
@TheDopalgangr
@TheDopalgangr 5 месяцев назад
The XTool S1 does a great job at making those lids, debating on pulling the trigger on one myself.
@woodworkingwithSkyler
@woodworkingwithSkyler 5 месяцев назад
I reviewed many lasers. s1 is the top quality one so far
@norm5785
@norm5785 7 месяцев назад
Both look awesome. The Christmas one definitely catches your eye. Thank you for sharing your beautiful projects with us. Everyone stay safe, happy and healthy. From Henrico County Virginia
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Hi Norm. My favorite one is the tulip one
@patw999
@patw999 7 месяцев назад
Are going to do a video on laser engraving the Halloween box? I would like to see that done please.
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Yes, absolutely. Coming soon
@curtdrahn8522
@curtdrahn8522 7 месяцев назад
I enjoy your show. Cutting glue brushes is a great idea, however I find that cutting on a angle gives me a nice ability to get glue in a narrow or tight area. I cut to 45 to 60 degrees. After use I dump them in a pot of water and try to remember to get them out the next day, a bit of rust happens but it cleans up and extends the use a bit.
@CorinaStMartinArt
@CorinaStMartinArt 7 месяцев назад
This is great! Which laser did you use for the engraving?
@Ham68229
@Ham68229 7 месяцев назад
Awesome job, love these little boxes. Cheers :)
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Glad you like them!
@pbgrafx
@pbgrafx 7 месяцев назад
I really like these boxes. They came out so beautiful. I suppose you could put potpourri inside and give them as gifts, or maybe tea leaves, though I imagine the smell of the cedar might add to the tea taste. Anyways, your creations are lovely as usual. Would love to see some wooden desktop organizers as I think you have some pretty woods that you got recently that could make a desk look really sharp. Keep the vids coming. You are awesome.
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Thank you. Actually a desk organizer is on my to do list:)
@Heseblesens
@Heseblesens 7 месяцев назад
Amazing work! And so informative when you tell us about your project. Ten thumbs up! 🔟*️⃣👍🏻
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Thank you
@flashwashington2735
@flashwashington2735 7 месяцев назад
I'm all thumbs, too!
@philbrown9198
@philbrown9198 7 месяцев назад
They really are fantastic looking boxes Skylar. I note that you glued the base on all four sides, do you ever have trouble with expansion / contraction of the base across the grain either on the base itself or affecting the side piece joints?
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Hi Phil. Its a small box , I dont think will be a problem. however, only been doing woodworking for a year and so fall all the boxes I have done seem ok
@mojado44
@mojado44 7 месяцев назад
Very informative. Those boxes were beautiful. If I may ask, where did you get the vectors of the tulips and nightmare?
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
I bought them on Etsy
@mightyV444
@mightyV444 7 месяцев назад
* "How to make _these_ beautiful wooden boxes" 😉 And yes, very nice indeed! 😊
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Thank you
@mightyV444
@mightyV444 7 месяцев назад
@@woodworkingwithSkyler - You're welcome! And congratulations on reaching 10,000 subscribers! 😀👍🥂🎉
@playamytrumpet
@playamytrumpet 7 месяцев назад
Fantastic. I have a laser machine and no way can I figure out how to laser 3D such as your tulips. Very nice work you do. Thx for sharing
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
I will have a follow up video, showing exactly how to achieve this look
@protozee
@protozee 7 месяцев назад
Cant wait for the follow up , where did you get the file I love it@@woodworkingwithSkyler
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
@@protozee I got the file on Etsy. Follow up video coming out in 30 minutes
@Dta1996
@Dta1996 7 месяцев назад
Nicely done. The aromatic cedar is nice touch as is the tulip lid.. Where did you get the tulip pattern? Did you use your cnc or did someone make it for you? Bot the box and the lid are lovely. Well done
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Thank you. The design is from etsy and I engraved it with my Xtool S1 laser.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-byv52piMJSA.html
@wandayoung810
@wandayoung810 7 месяцев назад
I absolutely love these boxes! Which engraver would you recommend that we get to accomplish these results?
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
I used Xtool S1
@tomherman2277
@tomherman2277 7 месяцев назад
Have enjoyed your box making video's for a while now, I would be interested in knowing and watching how you made the top of the cedar box with the tulips. Was it with a lazer and if so please demonstrate?. Thank you
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Coming soon! I used a laser that is not yet released. I been testing it and it will get released on the 19 so then I can show exactly what laser and how I did it. Dont forget to subscribe and turn on notifications so you wont miss it
@emmettdavis9435
@emmettdavis9435 7 месяцев назад
@@woodworkingwithSkyler
@emmettdavis9435
@emmettdavis9435 7 месяцев назад
suggestions for those not afford laser? is there such a thing? @@woodworkingwithSkyler
@ljgault
@ljgault 7 месяцев назад
Skyler, those Jorgensen clamps are on sale during Prime Days (today & tomorrow) @ 29% off or 4 for $26.39.
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Awesome. Thanks. I might get some more
@DavZell
@DavZell 7 месяцев назад
The 12" is on sale, too, for 2 @ 24. But if you want 4 of each, they have a combo pack of 2 of each for $32. So that would be all 8 for $64 instead of $74.
@manuelurdaneta2105
@manuelurdaneta2105 Месяц назад
Everything is excellent, but why you don’t look at the camera when you are near it 😊
@playamytrumpet
@playamytrumpet 7 месяцев назад
Thank you for sharing, I missed the video of the engraving o& the lids, where do I see those? Great work
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Coming soon full video of making that box step by step showing engraving, staining, cutting the round box, setting etc
@russellfay81
@russellfay81 6 месяцев назад
Really beautiful boxes. And I especially like how your finish looked, I'll have to give that a try. But I was really wondering what model of laser engraver you used? I saw your unboxing of the xTool, did you use that for these?
@woodworkingwithSkyler
@woodworkingwithSkyler 6 месяцев назад
Xtool s1 40W
@edwinf4393
@edwinf4393 2 месяца назад
@@woodworkingwithSkyler 23:14 23:14
@jamesbrasseaux133
@jamesbrasseaux133 7 месяцев назад
Beautiful work!
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Thank you very much!
@guidelineuk4876
@guidelineuk4876 6 месяцев назад
Great channel, great presentation,great projects. subscribed😎
@woodworkingwithSkyler
@woodworkingwithSkyler 6 месяцев назад
Thanks for the sub!
@madwilliamflint
@madwilliamflint 7 месяцев назад
That's gorgeous. So I know you reviewed a few lasers. Which one did you settle on? Or are you still putting them through their paces?
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
I have two more lasers to review but I already know which ones I am keeping. Xtool S1 will permanently have a home in my shop and creality 40W will be my backup laser.
@madwilliamflint
@madwilliamflint 7 месяцев назад
@@woodworkingwithSkyler Excellent, thank you. Now to hold my breath and commit :)
@fk6823
@fk6823 7 месяцев назад
​@woodworkingwithSkyler I just purchased the Falcon 2 40watt.. I've yet to get It setup. I'm new to laser so I'm excited to get started using it.
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
@@fk6823 great choice. I think you are going to love it.
@joecachia749
@joecachia749 6 месяцев назад
Great video. What brand and model is your table saw and fence?
@woodworkingwithSkyler
@woodworkingwithSkyler 6 месяцев назад
My table saw is a dewalt. Not sure what model but it has some issues
@joecachia749
@joecachia749 6 месяцев назад
@@woodworkingwithSkyler oh ok, I just liked the way you dialled the fence across by turning the knob. Did that come standard?
@thebigswede1736
@thebigswede1736 7 месяцев назад
I'm curious. How did you decide to use dye from a guitar products supplier?
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
I was watching a video on guitar finishing, wanted to know what they use to get it so smooth and nice feeling, how they fill the grain etc. The person was doing a sunburst effect using vintage amber, cherry and tabacco brown. I loved the look so I bought the stains:)
@flashwashington2735
@flashwashington2735 7 месяцев назад
@@woodworkingwithSkyler I watch the luthiers also.
@robertjerome1889
@robertjerome1889 7 месяцев назад
Ware do you get the box tops ??
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
I bought the design on Etsy then I engraved it on wood with my laser machine
@tomla3155
@tomla3155 7 месяцев назад
Don’t you risk kickback when making a rabbet that way?
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
No, because is is not a cut through. Its the safest and easier way to do rabbets.
@hanswichmann5047
@hanswichmann5047 7 месяцев назад
Hey Skyler - how about a little bio background? I'm good with accents, but I just can't place yours!! Very nice work BTW & I enjoy your presentations...
@brucemcneice8559
@brucemcneice8559 7 месяцев назад
Ilove your woodworking skills.And your so beautiful ❤️.win win
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Thank you so much!
@daimyo2k
@daimyo2k 6 месяцев назад
Did I miss the part where the flowers on the lid were made??
@woodworkingwithSkyler
@woodworkingwithSkyler 6 месяцев назад
Master the Art of Engraving with Xtool S1: Essential Settings & Techniques ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-byv52piMJSA.html
@daimyo2k
@daimyo2k 6 месяцев назад
@@woodworkingwithSkyler Thank you Skyler =D
@groverearp2600
@groverearp2600 7 месяцев назад
Hi Skyler it's Grover . THIS is a very good video and you look stunning . I work often with walnut , I'll give that Color Tone stain a try. Also, please give the name of the company where you get the Cedar
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Thanks groover. Ocooch Hardwoods
@truthbetold2914
@truthbetold2914 7 месяцев назад
WOW! The view today is even better than yesterday...very nice!
@flashwashington2735
@flashwashington2735 7 месяцев назад
Lots of channels for that, little wood. God bless you cur.
@williamdgmartin
@williamdgmartin 7 месяцев назад
Always start the day with a push-up
@markmillward9733
@markmillward9733 7 месяцев назад
You are my new favorite woodworking channel. Your box's tulips are beautiful and your voice with the accent is sexy❤
@abruptlyblunt
@abruptlyblunt 7 месяцев назад
simple and elegant if you have a laser engraver which the purchase of would kinda blow the whole doin it for cheap thing and if you can't afford a laser engraver then it's just a useless run-of-the-mill little box....
@mojorizn72
@mojorizn72 7 месяцев назад
Great work. Is there a video of the tulip lid engraving?
@woodworkingwithSkyler
@woodworkingwithSkyler 7 месяцев назад
Coming soon
Далее
Power breaking fail will have you weak 🤣😭
00:19
Wooden Keepsake Boxes Made From Scraps
15:11
Просмотров 121 тыс.
Попался Коля..))
0:11
Просмотров 1,7 млн
Вытащили МОНСТРА из Воды☠️
0:35