HOW TO MAKE USED PISTONS BETTER THAN NEW WITH REVOLUTIONARY AND AFFORDABLE COATING FROM US CHROME

Подписаться 612 тыс.

Просмотров 14 тыс.

50% 1

Join us at the US Chrome and Line 2 Line booths at the Performance Racing Industry (PRI) show as we show you how to make your used pistons better than new with this special coating, that only cost $38 per position. We also catch up female motorcycle road racer Jesse Capizzi and the world’s quickest and fastest motorcycle drag racer, Top Fuel Nitro Bike legend Larry “Spiderman” McBride to get their take on the high quality piston and cylinder coatings US Chrome has to offer. Please leave us your thoughts on this outstanding coating.
Watch more awesome FAST MOTORCYCLE action video playlists here on our channel:
/ cycledrag
Watch more of our recent & related videos!
Supercharged Kawasaki H2R Drag Racing -
• Kawasaki H2 Drag Racin...
Nitro Harley With Pro Charger Runs 6.06! - • 6.06!!! Supercharged N...
Orange County Choppers 246 MPH Top Fuel Pass - • PAUL TEUTUL Sr. REACTS...
Larry “Spiderman” McBride Gets Best Run on New Bike - • Larry "Spiderman" McBr...
Subscribe ► / cycledrag

Авто/Мото

Опубликовано:

12 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@glenbjack 6 месяцев назад

I'm gonna try them soon. Don't forget there are other ways to expand a piston. You can knurl it. I've done it with a needle gun on a wore out continental. Still running my forklift.

@andykjohnsonjohnson7622 4 года назад

Nice video ' J ' 👍 Fantastic new technology , on the coating of pistons and barrels 😲😲

@brianmeattey4151 4 года назад

Us chrome and line 2 line coating sounds amazing so thx for showing and godbless

@skandix 4 года назад

Great info!

@TheSilviu8x 2 года назад

I'm impressed, good things are always below the radar!

@daveyt4802 4 года назад

Man, this PRI show would be sweet to be at!

@MasterLee1955 4 года назад

Fantastic, great work !!!!!!! Gotta make some calls, stupid big GS motor coming right up.

@t.s.racing 4 года назад

I WILL be checking out LINE2LINECOATINGS, thanks for the coverage. I run more NITROUS in my GS than most competitors and I am certainly looking for that extra edge. May even try it in one of my Dyna engines. Time will tell.

@cycledrag 4 года назад

You got it! Call Scott Reath at US Chrome first. He is the dealer for them

@oceanhome2023 4 года назад

Yes I want it !!

@charlesstiles8904 Год назад

I had a yamaha gp1200-R that had Nikasil coated cylinders. Clogged jet caused a lean condition in cylinder 1. Cooked the piston, broke the rings and destroyed the head. The cylinder still looked new with the cross Hatching like the day I built it. FYI, the cylinders are not repairable at home. In fact it's nearly impossible to find someone to repair a nikasil cylinder. They will just sleeve it with a cast sleeve

@dennisschell5543 4 года назад

Kool 😎

@oceanhome2023 4 года назад

We should see some break through on 2 Stroke engines

@racerd3801 4 года назад

I did my first piston coatings in 1981 on a 81 SRX , with the chrome bores, so no oversize pistons were available . I was working at a Military contractor, who was building the navy guns and missile launchers. So they had the best platings and coating know to man. I got ahold of the coating that was used on the gun slides. This was a dry film coating used on 6 and 8 in gun slides. Little did I know at the time that I was probably the first person in the world to do this on a Piston. I coated my pistons so they had a slight press fit. As you ran the engine the coating would conform to the cylinder and that little 440 never had a piston problem again.

@427Musclecar 4 года назад

Do you need special tooling to hone or bore after the coating?

@tribal6974 4 года назад

Yes of course. If I remember correctly you have to remove Nikasil first to be able to hone or bore. That is the step you need special tools and replating service isn't really cheap, sometimes it can cost as much as a cylinder.

@tribal6974 4 года назад

But if you want to nikasil plate your cylinder for street use, I don't think you will ever need to replate it. I own a 2 stroke with aluminium-nikasil cylinder and it doesn't even bat an eye.

@baby-sharkgto4902 Год назад

That is the first time I have seen a gas ported 2 cycle piston, but I have been out of the game a few years

@echadmiyodea 3 месяца назад

The government has our best interests in mind.

@750VFR 4 года назад

Not going to be popular with piston manufacturers / suppliers?

@staatsfiend 3 года назад

cycledragqueenstoryhour

@needmetal3221 4 года назад

Plating wont help fatigue

@Baard2000 3 года назад

No, but less play means less vibration of the piston and that spares also bearings and rods etc..... so it takes longer before fatique cracks will form .......... For example I had one customer which had service life of piston of 1.5 hour in off road 250cc 4 stroke bike with 0.002" play....when reducing play to 0.00005".....piston life increased to 30 hours ....

@needmetal3221 3 года назад

@@Baard2000 that tight and it didn't seize?

@Baard2000 3 года назад

@@needmetal3221 need special running in procedure........ First start only couple of seconds running...... cool down... couple of times untill it can run and get it to work so piston rings can be bed in..... After doing couple of cylinders this way , together with mechanic ( good friend) he sometimes did 2th or 3th time running engine at idle with gentle throttle wacks untill at idle it started lowering rpm..a sign of piston starting becoming too big... Stop engine..cool down and again.....4th or 5th time....ready to roll. But always before riding hard...heat up engine gently till right temperature...