How to Modify your Shifter Linkage Part 3 (Assemble) - Honda Civic EG - Draft Project 

Thank you very much bro! Good luck with it and take care!

Can you give me the link for the shifter repair kit? I was trying to find it but couldn't

@@UntiI117 www.napaonline.com/en/p/ATM0772901 part number is ATM 0772901.

@@therealrichroc how did it turn out? Looking to do the same thing b series Did that kit work

@@nightcrawlerc9842 I was only able to use the inside parts. The bolt that it came with did not fit correctly. I had to go to home depot to find the right size. Had to mix and match the old parts with the napa parts. But I made it work and no more sloppy shifter. Good luck bro.

Up until now, it works great. These hoses are kinda rigid too.

Hi bro, most of the time you can get those metal bushings at your local hardware stores.

Bigger hose size: 3/8 Inner diameter: 9mm Outer diameter: 17mm Smaller hose size: 3/16 Inner diameter: 5mm Outer diameter: 13mm Sorry for the late response. Thank you :)

@@DraftProject bigger hose for my 95 civic ex was 7/16" and smaller was 1/4". Basically had to go one size up from what u recommended using the bolts u recommended. I also couldn't fit two washers between the b!tch pin piece, only one.

@@lurice0 Probably there could be a slight difference with the dimension of the shifter linkage T-joint of other Civic models. Sometimes, hoses may have the same sizes but have a difference with its inner dimension. For the washers, maybe you can try a thinner washers or try bending the bracket a little bit to make room for the washers to fit in. Sorry for that bro. I didn't expect that there was a difference. Just keep on making some adjustments until it works and suits your preference. Hope you finish it soon bro.

Hi! I want to use some ball bearings on my eg3. Shold i pick 9-17mm and 5-13mm, or does a hose widen up to match a pipe it inserts into? And what is a width of hoses you used? Bearings are cheap, but i dont want to buy extra if i dont need them)

No sir. The metal bushing will become the guide itself. Just make sure that the size of the diameter is close or fit to the bolt. It's okay bro, others might be wondering too. All of us want to make sure about the things we get into, so there's no problem with your question afterall. Godspeed bro!

Hello Roger Moreno! It depends on the process. I apologize because i couldn't visualize the structure of the g35. But it seems like theres nothing wrong with what you have said as long as it is convenient and nothing restricts the way. Yes, you should put grease before you put the boot over it. I advise you to use a synthetic grease because it is safe and designed for rubber materials like boots and etc. It provides good lubrication for metal parts too. I hope this helps you out. Thank you and God Bless!

Yeah, it might help. Reducing clearances into the linkage and rod will increase precision for gear shifting. It will be harder to shift with a loose rod. Take note that this is not applicable to cable type shifter linkage. There are Nissan Pulsar that has cable types. If you have a shifter linkage like mine, you can try this mod.

@@DraftProject hey mate good video it worked I can get 5th now

@@Up2mischief Thanks man! Glad to hear. Take care.

Probably po sir sa mga hardware po siguro o kaya pasadya pero mahirap po talaga makahanap. Mostly sa ibang bansa po talaga meron pero dito kahit sa mga auto supply wala po akong nahanap. Try niyo nalang po sir baka makakita din po kayo.

Yes sir it is identical with the EG models.

Hi sir! Based on your situation, i will start on smaller things, not jumping on the conclusions that will cost alot more. Let's start with the transmission fluid. Have you changed the fluid? If not, an old transmission fluid will cause the gearings to wear out and making it hard to shift on different gears. The other one to look for is the clutch hydraulic system. How does the pedal feel? Does it feel firm or spongy? If it is spongy, it means that there is air on the system which decreases the pressure when you depressed the clutch pedal. With that situation, it will be hard for you to shift especially on reverse gear. It's natural that you can freely shift on different gears when the engine is off since there is no rotation on the engine, clutch and transmission gears. When the engine is on, everything is rotating and connected. When you press the clutch pedal, it will disconnect the engine shaft to the transmission shaft, causing the gearings not to move in motion. That is the time where you can change your gears since there is no rotation on the gearings. If you have air on your clutch hydraulic system, the clutch cannot fully disconnect the engine and transmission, causing it only to reduce the movement of the gearings. When the gear is rotating, you cannot shift to different gear. Please check how the clutch pedal feels. If it is spongy, bleed it and see if that fixes the problem.

I also have a tutorial video for bleeding the clutch system. Here is the link below. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TeJA281yzN8.html

@@DraftProject Million thanks for the advice. :)

@@DraftProject Million thanks for the tutorial, as well.

You're welcome and thank you very much too. I hope you fix that problem soon. Godspeed!

Bigger hose size: 3/8 Inner diameter: 9mm Outer diameter: 17mm Smaller hose size: 3/16 Inner diameter: 5mm Outer diameter: 13mm

facebook.com/andredraftproject

Cainta area po kami. Magmessage nalang po kayo sa Facebook page ko po sir para mapagusapan po natin. Facebook Link: facebook.com/andredraftproject/ Maraming salamat po sir!

Draft Project boss lapit lang pala ko syo pwede ba ako pagawa ng ganyan? Salamat.

@@ardiflores1762 Pwede po sir. Message lang po kayo sa Facebook page ko po para mapagusapan po. Facebook Link: facebook.com/andredraftproject/ Maraming salamat po sir!

Hi sir! Yes po. Identical po halos ang Civic 1992-2000. Since newer model po ang Civic EK, check niyo lang po maigi yung mga joints niya baka sakaling may difference sa mga sizes or dimensions nang kaunti.

@@DraftProject Thankyou! Sir nagawa ko na sya ginaya ko yung mga ginawa mo sir. Keep it up more videos ☝🏻👌🏻

Glad to hear it sir! Yes po sir and maraming salamat po. Keep it up and more power po! :)