How to paint a BASE COAT/CLEAR COAT finish with amazing results!

Подписаться 64 тыс.

Просмотров 101 тыс.

50% 1

In this episode! I'll share how to spray a base coat clear coat finish with amazing results. How to set up your paint gun and help you understand how air pressure, fluid volume your speed, and spraying distance work together to produce the best results. This video will certainly help you with your repair or restoration project.
My amazon affiliate store : Tools and materials categorized to help you find what you're looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com/shop/garagenoise
In this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
R500 1.3/1.4/1.8 needle set
lvlp small compressor paint gun amzn.to/3zoVS3B
universal paint stand
amzn.to/40Sx9QZ
upol clearcoat
amzn.to/3XhGtgj
sprayIQ Disposable mixing cup compatible with 1.0 system
amzn.to/3hHCwkA
aeropro a610/R500
www.amazon.com/dp/B0BMNWDL3X/...
upol 2k primer
amzn.to/3OzRRQZ
low cost disposable cup system 1.0
amzn.to/3PfhKWs
astro sun light
amzn.to/3YbFFtT
premium tack cloths
amzn.to/3FK35zw
prep solvent
amzn.to/3FCoRl7
raven latex gloves
amzn.to/3BsiGBb
3m paint mask
amzn.to/3UP7NQP
70% isopropyl alcohol
amzn.to/3uCCy0F
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
paint gun and clear review playlist
• paint gun reviews
how to color sand and buff like glass
• Beginners guide to wet...
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com/shop/garagenoise
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/ZMeV1et9D/
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of user and not Garage.

Авто/Мото

Опубликовано:

29 апр 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 184

@marty3553 Год назад

Thanks a lot Chris for doing these videos and helping me with my new adventure into spray painting

@GarageNoise Год назад

Awesome! It's very rewarding and a lot of fun. Appreciate your comment and support brother!

@markzsolzai2427 8 месяцев назад

Thank you so much very helpful I've painted alot of things but always have to cut and buff this helped alot.

@davidallen6139 Год назад

Thank you for all of the informational videos and yes definitely a video about correcting paint flaws like dust particles and lint would be most appreciated.

@GarageNoise Год назад

Gotcha, I'll work on putting one together.

@randalldragoo9569 10 месяцев назад

Love your straightforward videos. Restoring a 65 Fastback. I'll be watching every video you make

@GarageNoise 10 месяцев назад

Thanks brother! Appreciate your comment! Sounds like a fun project.

@joanwilliams3221 Год назад

Always enjoy learning from your videos !

@GarageNoise Год назад

👊👍

@ChuySusej Год назад

I just painted my first panel yesterday and I came out really good all thanks to your vids

@GarageNoise Год назад

Awesome to know! Appreciate the comment and support!

@a.h.h9647 9 месяцев назад

I'm not professional, just DIY person with limited resources on my country and having square body restoring project. each video you post I gain some knowledge and feel more confident on what I'm doing you guys who spent lit of time and efforts to deliver this skills covered with helpfull notes and recomendation make our work easier and easier with time . thanks lot

@billsheehy1660 Год назад

Looks great, there is something to take away from every single video. Appreciate your time Thank You

@GarageNoise Год назад

👍thank's Bill! Appreciate your comment and support!

@JohnWD40TC02 Год назад

Thanks for sharing your skills with us Chris there is some very useful info here which will help me with my basecoat, mine used to go on quite dry and never felt smooth but a few weeks ago I started trying slow reducer (I used to use fast) in my base which has made a big difference as it's now nice a smooth which also helps my clearcoat finish👍John UK

@GarageNoise Год назад

I learned my lesson on using the right temp reducer the hard way, in 90° temp on a silver hood that I sprayed 3 time and I just couldn't get it smooth. I was so flippin frustrated! I flooded that hood with base and it felt like 180 grit sandpaper. Switched to slow reducer an it came out silky smooth. Appreciate the comment and support!

@okde1875 Год назад

Awesome videos !! thanks for all the help you provide thru them and for the all the effort and work u put on them !!

@GarageNoise Год назад

Thank you for the comment! Appreciate your support. Happy to hear the video's are helpful!👊👊

@wildestcowboy2668 Год назад

@@GarageNoiseI did a place on the bed and my paint store mixed the paint wrong. Can I spray base over clear the next day

@GarageNoise Год назад

@@wildestcowboy2668 yes you can , 600 or 800 base and clear.

@setthehook4me Год назад

Great video Chris

@GarageNoise Год назад

👊👍

@johnhuey1495 8 месяцев назад

Good stuff! Thank you for posting

@GarageNoise 8 месяцев назад

👍Thank's for watching!

@madbazRC Год назад

Going threw all these videos today. 😂

@GarageNoise Год назад

Awesome! Thank's for the support!

@sylaswojciechowski6895 11 месяцев назад

Noo don't throw the videos. What did they do to you?

@10percent48 10 месяцев назад

Me to lol. You got a channel?

@WJHandyDad Год назад

came out beautifully. I would like to see a video on dealing with problems as they arise. I'm a DIY and teaching myself painting. I'm getting better but I still run across issues while painting and some of them stump me

@GarageNoise Год назад

I got one in an upcoming video so stay tuned.

@theangrycamper 5 месяцев назад

I took ROP body and fender in high school then worked in a body shop for a few months as a kid, as a cabinet maker spraying conversion varnish with an airless was second nature. Now I just bought a jeep Cherokee that could use some fresh paint, my body work days were 35 years ago, wondering if I can still spray a car ha ha ha.!!!

@gman8464 10 месяцев назад

Very nice ,thanks for the tips 👌

@GarageNoise 10 месяцев назад

No problem 👍

@krh007 Год назад

Another excellent video Chris and it is so nice that you get down to business with no crap background music edited in and we can hear the spray gun working. When spraying clear with the Sagola did you have any of your portable exhaust fans turned on? as you did not seem to getting much overspray fog It is so refreshing to see excellent work can be produced in an open workshop without an expensive spray booth and nominal dust (if not any) landing in the paint

@GarageNoise Год назад

Thank's! appreciate all the kind words and support. So yeah it was a nice sunny day so I was able to kick a door open and had a fan exhausting out the fumes.

@octanegarage3729 Год назад

Thanks for a nother great video. 👍

@GarageNoise Год назад

Thank's O.G appreciate the support!

@anderson4841 Год назад

Thanks for the class. Hugs. São Paulo - SP. Brazil.

@GarageNoise Год назад

Yw! Appreciate your comment and support!

@chriskiefer8365 Год назад

Yes interested. Thanks for sharing

@GarageNoise Год назад

👍appreciate the support!

@bendafixer4542 Год назад

Great job!

@GarageNoise Год назад

👍

@user-qk3bb8hr1v 4 месяца назад

I am impressed ❤

@GarageNoise 4 месяца назад

👍

@cooldude2245 7 месяцев назад

Excellent

@johnsmith-qz4bv Год назад

another great video ...

@GarageNoise Год назад

👍thank's John!

@joerut7585 4 месяца назад

Hey Chris love the channel and your clearcut way of explaining. spraying in cold temps 50-60 degrees and using fast reducers and activators. Is that temp too cold and how long should I wait between coats for both base and clear and how long between final base coat and first clear

@jimfeaster4837 Год назад

I like great explanation

@GarageNoise Год назад

👍thank's brother!

@koky7288 Месяц назад

Good job.

@GarageNoise Месяц назад

Thanks!

@danaperkhidri6269 11 месяцев назад

Well done

@GarageNoise 11 месяцев назад

👍thank you!

@vasili70 Год назад

Great job Chris! I was just wondering if you were still using the GTO, and here it is!!

@GarageNoise Год назад

Don't use it enough but I love the low overspray of the r500

@ralphdicecca2889 6 месяцев назад

Nicely done

@GarageNoise 6 месяцев назад

Thanks!

@FarikoPacer 6 месяцев назад

I’ve been in it for 8 years as a prepper. I’ve been dabbling into spraying. I’m putting it on to wet. No runs. But with colors like Hondas Nh747m the way u apply it goes on too dark even tho I match the color fine and mix it up.

@marty3553 Год назад

Your videos are brilliant, I wish you could teach me to paint

@GarageNoise Год назад

👍

@frankrodriguez1977 Год назад

Awesome Chris. I need to paint my whole truck that color. Its a GM and the paint is falling off. Im going to do it piece by piece. Thanks

@GarageNoise Год назад

👍👊

@parot1072 Год назад

I wish i have that beutiful gun..but im working for it. Saving some money

@GarageNoise Год назад

👍

@craigcarter5276 Год назад

Thanks for the video learned alot I only wish it was a more darker color because I couldn't see how the base layed.❤

@GarageNoise Год назад

Check out some of my other darker paint jobs.

@cwmotorsports4497 Год назад

I am getting a ton of water out of my 60 gallon kobalt compressor. I’ve drained it and added the red filter. Do you have any more tips. Thanks

@GaryTaylorvw 6 месяцев назад

Hi, any experience with hycote panel prep degreaser ? I’m getting ready to epoxy prime and really don’t want any contamination

@mickholgate3347 Год назад

Love your work Chris! Always a great result. Your paintwork is up there with booth performed spray jobs!

@GarageNoise Год назад

Thanks brother! Appreciate your comment and support!

@mickholgate3347 Год назад

@@GarageNoise all the way from Australia here.

@GarageNoise Год назад

@@mickholgate3347 That's so cool!

@troyadams1076 Год назад

Thanks

@GarageNoise Год назад

🙏👍

@geoffreyrawlings9736 Год назад

Hi have you ever used anti silicone addertive do they help. Enjoyed the viddy always learning Thanks.

@GarageNoise Год назад

Yes, I perfer not too but it does work . A few times at a shop I was running the painter was having a terrible time with fisheyes . It cleared it up.

@fn6553 6 месяцев назад

My Speedo kote bright white dosn't cover very well even after sealing bondo and bare metel with speed kote sealer. Is there a way to make it cover better. Using cheap gun 1.4.

@jollyjumper1742 Год назад

It is always a pleasure to watch your informative videos. Let's suppose that the compressor is in keeping with air need of a HVLP spray gun. To spray a metallic base, which gun should be used, HLVP or LVLP?

@GarageNoise Год назад

I think an hvlp produces a slightly better finish for clear but it will also produce more over spray and use more materials. So it really just depends on your situation and needs. Appreciate your comment and support!

@MaTtOy14 11 месяцев назад

Hi Chris, thanks for the brilliant videos. Just a question, What kind of paint do you use for Base? do you use standard basecoat or 1 or 2k basecoat? out of the three which do you prefer to use with 2k clear?

@GarageNoise 11 месяцев назад

I use the nason xl which is a urethane enamel. Not a true 2k base coat cause it has no hardner. My feeling is for durability basecoat doesn't matter as much as the clearcoat, that's what protects the paint. Others may disagree and I'm sure there's exceptions but it's worked out well for me.

@gregmiller296 Год назад

Wondering, I been told to paint panel in same position it is on vehicle, like the fender I was told not to lay flat but position it like on vehicle thank you

@GarageNoise Год назад

On white or a solid color I find it makes no difference. On metallics is where you want the same paint orientation. It's best to hang the parts on those but a good orientation can still be achieved spraying it flat as well. Appreciate your comment and support brother!

@moffattn Год назад

HI Chris. Excellent video. Thank you! I've been following more closely as I'm about to attempt laying down base/clear for the first time. I'm pretty much done with primer and ready to start with my A610 that I've seen you use. I only have a small compressor so I'm limited to an LVLP gun. Just curious if you found the finish much better with the Sagola vs the A610? I've been thinking maybe I should use a different gun for clear but my options are a bit limited due to the compressor. In previous videos you seemed to get great results with the A610/R500. Just having last minute doubts. Thanks!

@GarageNoise Год назад

There's a slight difference, for me it really doesn't matter which gun I use. I wouldn't worry about getting another gun. follow the steps I share do some test panels and you should have no problem getting a great finish out of that gun.

@moffattn Год назад

@@GarageNoise Thanks!

@Danno74Z Год назад

Hi Chris, Really good video Chris. Did you tack between the base coats? Danno

@GarageNoise Год назад

I think I did after one coat of base. Most of the time I'll look it over between coats to see if it needs it. Appreciate your comment and support!

@geoffreyrawlings9736 3 месяца назад

Hi recently sprayed a bonnet had some tiny pinholes in the clear coat showing down to the sealer paint has not adhered properly what is cause .Thanks great video's. 18:09 18:09

@GarageNoise 3 месяца назад

That I believe would be a contamination from air supply oil, moisture something of that nature.

@basamcarshop9520 Год назад

I am have issue with dust I clean clean but I still have a lot of dust. I’m not sure what I supposed to do to get a clean job. I see you doing very good job with out paint booth I would like to know how I do good job without dust

@GarageNoise Год назад

Check this video out it's all about getting a clean paint job ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SJgy3y0wIdU.html

@dougpeirce726 Год назад

Any recommendations for sources for budget friendly online paint suppliers for urethane 2 part single stage color coats, factory color scheme? I've been using Martin Senour from my local Napa store for about 20 years as a do it yourself/hobbyist but everything is getting to be in the $350 or above range for a quart of color for dent repairs. The colors do match very well.

@GarageNoise Год назад

That's pricey, I don't have any online sources. I'm sure there are plenty out there but none I can recommend at this time.

@robertcharlton1551 Год назад

I didn’t understand what a drop coat is. You mentioned that w/ the Silverado white truck. I appreciate all that you do to explain videos

@GarageNoise Год назад

Drop coat is a light coat to to make the blend transition look seamless.

@FRANTHESCRAM 10 месяцев назад

Solid colors are easy

@GarageNoise 10 месяцев назад

👍

@carloskeener8707 4 месяца назад

It's actually pretty good for such a disorganized and dirty shop.

@FasterBastard1 3 месяца назад

Are you serious? It’s a shop, not a studio. 🤡

@jamespolucha8790 3 месяца назад

Is it good to put more coats of clear so wet sanding won’t go through to base coat?

@GarageNoise 2 месяца назад

You don't need more that two. You could apply 3 but you need more flash time between coats 2 and 3. If you put more coats on it creates more orange peel

@drumman-de8ku 2 месяца назад

After you spray base, can you scuff it with 600 or 800 before clear coat,is that a thing do you have to ? Been doing single stage paint, my first base coat, clear coat, but I have cleared it before. Does base coat blend better, let's say I do my top first

@GarageNoise 2 месяца назад

You can sand with 6-800 just to remove dust and then you must add another coat of base.

@jeantaylor6785 2 месяца назад

Did you use flex primer on the front plastic bumper piece and then put adhesive promoter???

@GarageNoise 2 месяца назад

And he's in promoter, is technically a flex. Additive, there's also flex additive built into the paint.

@jeantaylor6785 2 месяца назад

Oh.ok cool

@craigcarter5276 4 месяца назад

Does nason XL make a good pearl without the yellow tent? I'm trying to find a reasonable price white pearl that's good

@FasterBastard1 3 месяца назад

Add a pearl to normal clear coat. This guy has several videos messing with pearls and different pigments ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-53R57afnoaI.htmlsi=iWrMde6CTvbRxht7

@dannydiaz3645 Год назад

👍👍👍👍👍

@GarageNoise Год назад

👊👍

@danhenderson783 2 месяца назад

Gun is a Ronpeng 802. This Chinese company makes several decent quality spray guns including the popular R500.

@GarageNoise 2 месяца назад

This is made by Rong Peng It's actually the R830. The R802 is a good gun too It's the sata clone. They also make the R500 and a great Touch up gun R100

@danhenderson783 2 месяца назад

Yep, I commented on the wrong video 😂. I was watching the video about the Sata clone just before this one.

@anthonybrady3927 Месяц назад

Would definitely like a viedo where you fix things

@GarageNoise Месяц назад

@@anthonybrady3927 I've got many video where I fix things. Check out the channel and subscribe!

@richardjeun Год назад

I used Nason brand for my clear coat, waited about 24 hours before wet sanding. I used an aggressive 1000 grit paper and i literally could not remove enough material off. I though it would be soft since I didn’t allow a lot of time to dry so I actually started with a 1500 grit with medium to hard pressure, but hardly could remove any excess clear off. Should I wait another day or two and try wet sanding with 800?

@GarageNoise Год назад

Is it really rough? With heavy orange peel? Nason is good clear. Be careful using 800 you could sand thru that clear how many coat of clear did you apply?

@richardjeun Год назад

It’s smooth. Hardly any orange peel. The reason why I tired sanding it is because I had a drop of Gorilla glue drip onto the panel. I was gluing the Plastic bumper trim and the glue sagged down to the painted bumper. I couldn’t get rid of the glue only so I decided to wet sand and buff. I applied only 2 full wet coats of clear. Yes, it’s a damn good clear coat.

@GarageNoise Год назад

@@richardjeun ok so, your trying to remove the glue. That is a tough one.

@newz999 Год назад

Garage noise Do you teach people or classes people can take from you am in California please reply thanks

@GarageNoise Год назад

Just on the old RU-vid.

@angelcruz2865 Год назад

Hey I have this exact spray gun, what PSI would you recommend to apply clear coat?

@GarageNoise Год назад

I like it at 30psi for clear. Appreciate your comment and support!

@timhudson8958 7 месяцев назад

What needs to be done to spray base but come back months later? The roof and bottom of my truck are painted in single stage white. I’d like to flat sand them and clear all of it together. Will just a scuff give me a good bond between my blue base or should I sand with some 800?

@timhudson8958 7 месяцев назад

Months later to do clear .

@GarageNoise 7 месяцев назад

You don't want to let basecoat sit for a month before you clear. Typically you have a 24hr window. Sand with 800 before topcoat

@timhudson8958 7 месяцев назад

@@GarageNoise Thanks sir!

@jarelsuckrajh5932 10 месяцев назад

Yes I want to know how to over come obsracles

@GarageNoise 10 месяцев назад

Gotcha , I'll work on some videos

@Hazzy238 10 месяцев назад

Could the clear be sprayed onto the base several days after the base coat was applied ( acrylic paint)

@GarageNoise 10 месяцев назад

No usually there's a 24hr window to apply clear. Check your paint TDS

@andrewybarra2304 2 месяца назад

In your opinion what clears better the upol or acme1?

@GarageNoise 2 месяца назад

I like how the upol spray a bit better but not sure about the durability. I know the finish 1 has excellent durability.

@FE428Power 10 месяцев назад

On your Amazon store listing for the Sagola shows 4 different caps. Which one did you use and why? Ty

@GarageNoise 10 месяцев назад

The tech cap with the 1.3 great all around cap for base and great atomization for slick clear coat.

@FE428Power 10 месяцев назад

@@GarageNoise I've been trying to decide on a higher end gun. summit racing has the pro lite with 1.2,1.3, and 1.4 needles with te10 and te20 caps for $630. I'm trying to do slick paint work for restoration and the pro lite has been the one I've been eyeing until you said this one shoots a flat clear. Decisions? Help?

@GarageNoise 10 месяцев назад

@@FE428Power If your talking about the Sagola 3300 gto you can't go wrong. I can't imagine the pro lite is much better. When you get into these qualities guns there's not a huge difference. I believe the Sagola is a bit cheaper as well. I have sprayed with the pro lite and it's a great gun. I've always been a Devilbiss fan. I have two Devilbiss plus guns. If you've been dreamin about the pro lite and get the Sagola you'll always wonder about the pro lite🤣 You know what I'm sayin?

@alexanderstefanxandraswedi5835 7 дней назад

❤😊

@GarageNoise 4 дня назад

👍

@leerevell5998 Год назад

3 coats chris? 1 medium wet, 2 wet🤔 good as always 👍

@GarageNoise Год назад

Only need two. Appreciate your comment and!

@rajendrakumarravishanker8238 Месяц назад

how to overcome obstacles when painting

@GarageNoise Месяц назад

Gotcha!

@abdiasmarques4498 Год назад

What is the name of that red part on the pistol?

@GarageNoise Год назад

The ball on the end of the gun is a water trap.

@samirsendro9241 Год назад

What size nozzle for base, colorless?

@GarageNoise Год назад

1.3

@Sxvaqe-_- 4 месяца назад

What scratch did it have to apply base coat ?

@GarageNoise 4 месяца назад

600-800

@angelgarcia4328 Месяц назад

I see some shiny spots on vehicle

@GarageNoise Месяц назад

Maybe

@rvega314 Год назад

So there is really no need for blending agents?

@GarageNoise Год назад

Not on white or black or a lot of colors. Mostly I use a color blender or wet bed on difficult metallic colors like gold or silver. The other times you want to use it is in extremely hot temps it's very helpful then, to allow those metallic paints to lay in a color blender. It won't hurt to use it on everything if it makes you feel more comfortable in blending, but not necessary. Good question, I appreciate your comment and support!

@jeremiahtinsley8048 Год назад

Can i set my mini gun to 2.5 to 3 turn out

@GarageNoise Год назад

Start with 1.5 on a mini gun. See how that works bump it up if you need more.

@justins_grave Год назад

Can I spray clear with a R500?

@GarageNoise Год назад

Absolutely

@jlc5744 Месяц назад

why the adhesion PO

@bo-jf7nj Год назад

is there a link to the dust coat?

@GarageNoise Год назад

🤔

@bo-jf7nj Год назад

@@GarageNoise in the beginning of the chisel you suggested using a dust coat, is that a product to buy?

@GarageNoise Год назад

@@bo-jf7nj sorry, no that's just a light coat of base coat paint.

@danangaryanto3348 Год назад

Avaliable for Small kompresor 1/4 hp for wet Result

@GarageNoise Год назад

🤔

@sheerwillsurvival2064 Год назад

Next time Iam getting a gun

@GarageNoise Год назад

You might as well. It's a lot of fun . What happened?

@sheerwillsurvival2064 Год назад

@@GarageNoise primer looks good but the primer came out kinda spotty had to do first 4 coats . After blocking only got 2 more coats as bottle. Was empty it’s was near expiration date 12/20/21 . Says 36 months on line. Still came out ok it’s wet sanded and will paint with the mixed and filled matching paint and 2k clear next Saturday. Got fingers crossed

@b00sted_SS Год назад

What actually causes orange peel? Too much product or too many coats? Or?

@niconickzi9748 Год назад

I think it's product that arrived already dry on the panel, possibly caused by the use of the wrong thinner, or too far a spray distance from the panel. Improper gun adjustment/poor atomization may be the cause as well. I place myself under your comment to also know a little more if he ever answers. I still see a lot of orange peel on the varnish once applied, it's not mirror like I like.

@GarageNoise Год назад

There's a lot of variables, but the simple answer is too much material and poor atomization of the clear. I'll try to go into it more in a future video.

@phillipgrandison2384 11 месяцев назад

Atomization yes, it also helps to thin out your clear.

@Edwardkirk-ln5jy 11 месяцев назад

Looks like you have very little oversprsy

@GarageNoise 11 месяцев назад

👍

@jamesquinnie7573 Год назад

Looks good but still has som orange peel in it.

@andrewybarra2304 Год назад

So does the rest of the truck wouldn't look right dead flat

@GarageNoise Год назад

👍

@GarageNoise Год назад

👍

@jamesquinnie7573 Год назад

You got some dead flat out the gun? Seems nobody can do it these days!!

@boostgaragebuilt1363 Год назад

Truly love this channel has taught me so much, what I need to improve, everything I need to know, truly amazing channel learned more here than I did at tech school 🫡

@GarageNoise Год назад

Awesome! Nice to hear, I'll keep them coming! Appreciate your comment and support!

12:30

Spraying CLEAR COAT: 4 keys you must know!

Просмотров 139 тыс.