The lack of introduction definitely caught me off guard, but excellent video! Great timing for the algorithm to show this to me too, someone had just asked me about painting Sons of Horus.
Step by step your technique looks easier to accomplish and produces a better result than a number of others. Not only that but it actually makes me feel like I can do a decent job without sub assemblies. I look forward to trying it out. I appreciate you starting with the basics and look forward to where you go from here.
Good stuff👍 very inspiring to go and paint - love the simple teaching method you have - not overwhelming and straightforward, makes one feel relaxed about starting a new mini - look forward to more from you, all the best 😎👍
I’ve had a nighthaunt army for what feels like forever and I want to paint them but in a way that is more textured than airbrushing and mere brush painting. THIS looks to be what I have been in search of. I’ll definitely be trying this method! Great video, commentary, and techniques. Thank you 🙏
Thank you for the vid mate. I learned a few tricks from your detailed tutorial. I'm not sure I'm going to apply the technique to 32mm miniatures, because i feel much more confident controlling my stippling with a straight dry brush than a sponge but it looks just the tool to use for armors and other bigger flatter models like terrain. Very helpful !
Thanks 😄. I'm trying to do an under 1h variation for a lot of chapters. Next up should be salamanders and raven guard ( this one is a headache), ill definitely add Dark Angels on the list. Love Dreadnoughts so definitely going to paint one up in the future, got a few variations I need to assemble first 😄
@@AnotherDayMiniaturesDo you have a Instagram for miniature painting? I have a small but fairly decent warhammer following. I’d like to share your profile
I had seen the reel on instagram but only now do I get to see the full vid. Would really love to see that kind of technic on bone armor deathwing terminator
Subscribe and notifications all! Can’t wait to watch more videos, would you be able to put your paints in a shot per model so we can see the ones we need 🙌🏻 glad I found your Instagram man
Thank you! Glad to hear you enjoyed it. I wanted to include the wet palette with the paints; however, I didn't expect to make a full video out of it, so it never got recorded. I had to scrap together what I had and stop the original video, which was going to be about making a small diorama piece of terrain from garbage and painting it with a sponge. I didn't expect the Instagram reel to do so well :D. I'll definitely try and incorporate it in the future full videos.
Pre Heresy their highlights would be a very warm but still desaturated grey. With maybe a few dots of near white for highlights. Best to probably mix it from the charcoal to have smoother transitions and slowly work up.
Thanks. It's a Synthetic Art Sponge for Painting. You can find them in art stores. I show what they look like in the beginning of the Blood Angels Video. 😀👍
That's absolutely sick! Have you jad any expedience with this style with an acrylic wash instead of streaking grime? Im curious how itd be with just an acrylic wash since theyre easier to deal with if i accidentally spill something.
Thanks. I use acrylic washes quite often. I tend to either mix my own or use contrast paints for it. Examples I have with it are the latest black Templar video, and a few shorts( ork, hobbgrots). They're definitely more limited, but sometimes I just don't feel like getting messy and I think they'll do a better job with a color shift.
I really love this paint scheme and also want to do it! One question that I don't know becaue I am quite novice to advanced techniqued. How did you mix your green color? I don't know how you made the green more bright.
I mix them on a wet pallet. Take the emerald green, add some black to it, this will create the dark base, add more emerald green to the same mix to make the second layer. Then add Ice Yellow to that mix to create the next later. For the final highlight layer, it's Ice Yellow plus a tiny bit of emerald green. This final highlight is what makes it pop.
Amazing tutorial. Are you thinning the paints at all or are they straight from the pot and the wet sponge does the thinning for you? Also, do you varnish the model after applying the final dry pigment? Thanks
Thanks :D I use a wet pallet that keeps the paints from drying, and the dampness of the sponge does indeed essentially thin the paint by acting as a second wet pallet in hand. I sometimes add extra bit of water ( depending on the size of sponge in hand) when I'm doing the base or layers I'd like to be thinner. I usually varnish the model right before I apply the dry pigment, as otherwise that dusty effect is gone. Afterwards I either blow on the model or air blast it, just to get the excess off. It does stay on the model without an issue, as long as you don't touch it.
For something like a tyranid it does work well ( ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uIAqFNDyImA.html ) However for small things that are complex like tau or guard, it doesn't really work as their details tend to be covered by arms and difficult to get into. If you're new, give contrast paint technique a try. It tends to be very forgiving and starts to give you an idea for where highlights and shadows need to be on a model.
Cheers! I personally use AK Matte Varnish through an airbrush. For spray can varnishes my personal favorite is B603 Mr.Premium Top Coat Flat but that one tends to be a little hard to come-by.
Make sure it's not an expensive airbrush 😅, varnish tends to be a little hard to clean out entirely, I use a 15$ one for priming and varnishing. There's also AK ULTRA Matte, that stuff is very chalky on it's own. However mixing it 50/50 with Normal Matte does fix it. @@Longshanks4268
How would you approach the top of the armor of a classic terminator? It's relatively flat and large area. Would you build up highlight around the middle and then edge highlight, or leave the middle darker and focus on the edges from the start?
Personally I would definitely focus on building a nice mid tone in the middle and then coming in with an edge highlight. I think it will provide a more pleasant look than having a really dark middle.
Make sure your sponge is never dry and work in thin layers. Wait for each layer to dry. Take your time while you're getting used to painting with a sponge, and above all else have fun 😁 Good luck mate, you got this 🤘
Any advice for minis with tighter spots? This terminator in the video had his arms wide open but Ive tried this technique on a few minis and ones with the arms going across their chest with a weapon i feel like is impossible to cover with a sponge and to get a base color down
I painted a Salamander using a sightly more rough but easier as it adds a bit of brush work. His hands are in the exact position I think you're talking about. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-16bWzC6aB7Q.htmlfeature=shared&t=23 Best advice there is to use a smaller sponge and come back in with a little bit of brush work.
All the colors I used were mixed from the colors I listed, the main base coat was emerald mixed with black. Wish I could provide more details, but it's really been a while. Cheers.
I've done it before, and yes! It's a bit trickier, since metallic paints don't thin the same way that traditional paints do, but building up color with sponging or stippling absolutely works for metals. Personally I like to start with a nonmetallic dark brown and then apply the metals over that.
I personally use synthetic art sponges, you can find them in art stores and similar places. This other video actually has links to the ones I use but you can find them much cheaper in local stores probably ( ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tg73QcYi5TE.html )
@@AnotherDayMiniatures Really appreciate it! I just finished getting a knight castellan ready for painting... I think I'm gonna try this sponge process instead of the airbrush
@@AnotherDayMiniatures let me ask you this; do you think that this could be done with metallic paints? Like, I'm wondering if I could do this process with something like Vallejo Metal color, to give a good coat to the metal frame under all the armor plates..?
The best solution is to varnish the model before you apply streaking grime. Its important to allow some time for acrylic paint to dry, applying grime before it's dry can make it weaker to the process. Alternatively try using more odourless thinner and apply it on the model with q tip but don't rub. Let it absorb for 5-10 seconds and reactivate the grime. Then use the make up sponges for clean up as they will be more gentle.
Thanks for the answer, i have another question. any chance you could do this on a normal marine? pref mark 3-4-6 and maybe ultramarines? i am trying to figure out what colors to use but have not found a nice highlight etc.@@AnotherDayMiniatures
@@damyendevries7662 I actually plan to do Ultramarine one hopefully early next week, I was going to do a primaris, but I have mark 6 marine I could do instead!