Тёмный

How To: Parking Brake Cable Upgrade | GM Silverado/Sierra 1500/2500/3500 

DIY Diesel
Подписаться 11 тыс.
Просмотров 19 тыс.
50% 1

In this practical video, I'll show you how to upgrade the parking brake cables for your LBZ Duramax. No more unrealistic demonstrations - I'll provide a realistic installation experience.
Upgrading your parking brake cables is easier than you think. I'll guide you through the process step by step, making it simple to replicate on your GM Silverado or Sierra 1500/2500/3500. Enhance your vehicle's safety and performance effortlessly.
Find the parts and tools you need in the description below, making your experience even smoother. Don't forget to hit that thumbs up and subscribe to the channel as we work towards reaching 10,000 subscribers!
Thank you for watching, and stay tuned for more exciting automotive tutorials, tips, and tricks.
Additional Videos:
Rear Breaks:
Complete Rear Break Replacement for a LBZ Duramax
• DIY Rear Brake Replace...
Product Links Below ⤵️
MERCH:
linktr.ee/diydiesel?fbclid=PA...
Parking Brake Cables:
www.rockauto.com/en/catalog/c...
Film Equipment:
2007 LBZ Duramax Mods:
Truck Mods!!!
DSP5 switch
Ppe Fuel Rail Race Plug
Ppe Ported Fuel Rail Fitting
AirDog165
Kryptonite Lower Bump Stops
Kryptonite Sway Bar End Links
PPE Stage 3 Tie Rods
Kryptonite Death Grip Full Floating Traction Bars
Stainless Fuel Lines
Lincoln Diesel Specialties Sump
Timken Wheel hubs
Powerstop Truck and Tow break kit
Nylon Coated Break Lines
Russel Stainless Braieded Break Lines
Curt Class 5 2" reciver
ARP Head Studs, Gaskets
5"-7" North Spec Built Tip
5" MBRP Exhaust
3" Stainless PPE Down Pipe
PPE Passenger Side Stainless Up-Pipe
Lincoln Diesel Specialties 68mm Turbo
WCfab cold air in-take
WCfab Egr Delete
WCfab Upper Radiator Pipe
WCfab Break Resivor Cover
(Blueberry Frost)
Boost Auto Mirrors
ReconLighting Cab lights
ReconLighting Tail lights
Bushwacker Fender Flares
Rigid Industries Midnight D series Fog Lights
Pod Light Mounting Bracket
Compustar remote start
Auxbeam LED Headlights ( High&Low Beam)
Music:
Epidemic Soundl

Авто/Мото

Опубликовано:

 

21 май 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 35   
@robertmagee8257
@robertmagee8257 Год назад
I'm getting ready to replace mine soon. Thanks for the reality. A true mechanic.
@DIYDiesel
@DIYDiesel Год назад
Appreciate the support 🤘 check the comments there’s some tips on this in there from other guys
@mwstonesr
@mwstonesr Год назад
Thanks for showing your struggle with the cable. Most would edit the tough part out. Appreciate the part numbers as well.
@DIYDiesel
@DIYDiesel Год назад
I agree I like to not edit out the BS as much as possible. Also thanks for watching and the support! 🤘
@mariocorleone106
@mariocorleone106 Месяц назад
Thank you for your service. And thank you for this vid. Very helpful.
@italianhillbilly1978
@italianhillbilly1978 Год назад
great job......thanks for the new workout lol......keep up the content coming along.....thank you
@DIYDiesel
@DIYDiesel Год назад
🤣 appreciate it lol
@maui5797
@maui5797 10 месяцев назад
it was great watching this video because i reacted the same way when i couldn’t get the 2 cables to connect 😂
@peterwatkins-h6r
@peterwatkins-h6r День назад
I watched you struggle with this video. I had the same problem. I ended up making a tool. It cost me less than 10 bucks and it draws the cables right together and snaps right into the coupler. I’d send you a picture, but I don’t see an option for that.
@leeroyexcavator9149
@leeroyexcavator9149 2 месяца назад
We have been fighting getting the cables to latch also. About 4.5 inchee short!!
@GMCJay_lly
@GMCJay_lly Год назад
Commenting for support!
@DIYDiesel
@DIYDiesel Год назад
🤘 appreciate it!
@dominickfiduccia5588
@dominickfiduccia5588 Год назад
Clamp visegrips to Cabell use ratchet strap hook on visegrip and cab mount tighten pops right in
@DIYDiesel
@DIYDiesel Год назад
@@dominickfiduccia5588 damn! That’s badass advise great thinking on that.
@mariocorleone106
@mariocorleone106 Месяц назад
Soooo... Did you ever adjust the pedal? I took a zip tie and tied the the "spring lever" down, pulled as much cable as i could and clamped it so i had plenty of slack to get that junction connected.
@philipgavin6962
@philipgavin6962 11 месяцев назад
Not to be critical, but you have one of the cables in the cup connector bracket installed incorrectly.
@DIYDiesel
@DIYDiesel 11 месяцев назад
Do explain? My first time doing it so if I gotta change it I will 👍🏼
@philipgavin6962
@philipgavin6962 11 месяцев назад
The cable that you have sticking out of the cup bracket where the two cables come together should be from the outside in. You have it from the inside out. Don’t know if that will help. I tried to send pics of my truck but I can’t figure out how to do it.
@DIYDiesel
@DIYDiesel 11 месяцев назад
@@philipgavin6962 ohh gotcha so I just have them hooked in the clip the opposite way 👍🏼
@philipgavin6962
@philipgavin6962 11 месяцев назад
@@DIYDiesel yes.
@dellmack1
@dellmack1 27 дней назад
Don’t understand help please?
@joeybonnett750
@joeybonnett750 Год назад
😢 I feel ur pain bro. Pull the excess out of parking brake lever in cab and clamp it so it doesn’t return when you let it go, then all ur power can go into the cables coming from the axle. 🎉
@DIYDiesel
@DIYDiesel Год назад
Ya someone else told me this afterwards as well. Definitely will be doing this on the next truck! Appreciate the advise 🤘
@stang1966gt
@stang1966gt 8 месяцев назад
The shop changed the cables, then the rear disc brakes and rotors for $1750 on 4 visits. I gave up on them and have to make e-shoe adjustments every few thousand miles. Seems it fails went hot but strong when cold.
@loganodell1574
@loganodell1574 Год назад
It's not letting me pull them together at all I'm less than an inch away but I can't pull anymore.
@DIYDiesel
@DIYDiesel Год назад
You really have to pull hard like I did to un wind the parking brake lever. You may need to unwind it completely
@Cowsandtractors
@Cowsandtractors 11 месяцев назад
What’s the part number for that bracket?
@DIYDiesel
@DIYDiesel 11 месяцев назад
I don’t temper I’ll have to look it up. It was near the same category on rock auto
@drbogo321
@drbogo321 11 месяцев назад
What no loctite on the retaining bolts? He didn't lube the cables prior to their install.
@DIYDiesel
@DIYDiesel 11 месяцев назад
Lol end of the world right?
@luisacevedo324
@luisacevedo324 9 месяцев назад
Man. The same shit happened to me. I thought GM sent me the wrong one. 😢.
@Cantsaydog
@Cantsaydog Месяц назад
That’s a total BS on Chevy part that emergency brake cable. I made mine adjustable back at the leaf spring engineers don’t have to do it so they don’t care now it’s a half hour job instead of having a heart attack trying to get those two together 😁
@Official_R_P_A
@Official_R_P_A Год назад
Honestly you are better off to attach to the brakes last. It is much easier to fight 1 spring at a time.
@DIYDiesel
@DIYDiesel Год назад
I use to do it that way and I could never get it good enough to hook on. Could just be not strong enough tho idk
Далее
How to adjust parking brake Chevy Silverado 2500hd
8:31
How to Replace and Adjust Parking Brake Cables
12:07
Просмотров 1,2 млн
Top 10 CHEAP Upgrades for a Rusty Sierra/Silverado!
30:36
2000 Chevy Silverado Parking Brake Replacement
34:29
Просмотров 64 тыс.
CHEAP TRANSMISSION UPGRADE MAKES A HUGE DIFFERENCE!
17:01
Это самая гигантская машина!
0:26