HOW TO POLISH YOUR DIECAST CARS TO A MIRROR FINISH!!!

Подписаться 13 тыс.

Просмотров 21 тыс.

50% 1

In this episode, we'll go over the steps to polish your diecast cars to a mirror finish! We'll be doing it on an old '57 Chevy casting that is pretty poor quality to be honest.
WATCH THIS VID FOR HOW TO STRIP AND BRUSH YOUR DIECAST CAR TO GET READY FOR SANDING AND POLISHING:
• How to strip the paint...
👉 STAY TUNED FOR NEXT EPISODE WHERE WE WILL TRANSFORM THIS CAR INTO A BEAUTIFUL SPECTRAFLAME GREEN....WITHOUT AN AIRBRUSH!!! TUTORIAL COMING SOON!!! 😁👍
THANK YOU FOR ALL THE LOVE AND SUPPORT, YOU GUYS KEEP ME GOING! 😁👊❤
👉👉 Materials Needed (with links):
- Sandpaper Multipack (all grits you need and more) - amzn.to/39YsRjH
- Dremel - amzn.to/3rtlyq0
- Dremel Buff Wheel - amzn.to/3oVPsRS
- Rubbing Compound - amzn.to/36QlBnY
- Nitrile Gloves - amzn.to/3tHN7hg
Music in Video:
"Secrets" - V.I.P.N.
• V.I.P.N - Secrets (Har...
Intro/Outro Music: "Good Times" - V.I.P.N.
• [FREE] Drake Type Beat...
Visit V.I.P.N.'s Channel:
/ vipnmusic
👉👉 LIVESTREAMS EVERY SATURDAY AT 7:00PM ARIZONA TIME, AND WHEN PERMITTING WEDNESDAYS AT 7:00PM (OR TIME ANNOUNCED ON POST THAT DAY) 👈👈
Logo Courtesy of:
Michael Dolores @mindlightmedia
/ mindlightmedia
Donate to Honest Diecast:
www.paypal.com/paypalme/hones...
JOIN OUR PATREON!
/ honestdiecast
Please join us on FB: groups/24265...
(Please answer the membership questions or your membership request will be denied)
Gear Used In Videos:
GoPro Hero 8 Black - amzn.to/3piSMHw
Boya BY-M1 Mic - amzn.to/2WPFRRb
GoPro Shorty - amzn.to/392MDJ0
GoPro Soft Grip - amzn.to/3b9sYto
GoPro Dual Battery Charger - amzn.to/394DMGx
Contact us: honestdiecast@gmail.com
Have a video request? Leave a comment below!
My videos are intended for the adult collector and customizer. I am not a Mattel representative and I do not receive monetary compensation or gratuity for show casing Mattel products. My methods for customizing diecast cars may differ from other methods and I do not claim for them to be the best, simply a method on which to do it. I am not responsible if an injury (or worse) happens due to negligence, misuse of product, or poor execution (wear your protective gear). My views or comments on models, castings, events, diecast community news, or anything else diecast related is soley my view and opinion for sake of digestion and discussion. Comments and feedback are greatly appreciated as we want this channel to be of the upmost information, best content possible, and entertainment for you the viewer to enjoy.
Thank you for joining us and thank you for your support!

Авто/Мото

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 155

@bdanyluk 3 года назад

Add 5k and 10k grit to your list...its much better after using those as well. Great video!

@HonestDiecast 3 года назад

Oooh nice, will do Widowmaker! Where do you purchase those? Not sure if Ive ever seen em local.

@bdanyluk 3 года назад

@@HonestDiecast Amazon..search for this. Sanding Discs 6 Inch,10000 Grit Wet Dry Sandpaper,Silicon Carbide Hook and Loop Random Orbital Sander Round Sand Paper by MAXMAN,30-Pack

@MrOiram46 11 месяцев назад

You can also find 12k grit padded sandpaper at Hobby Lobby

@MUSTANGHUNTER 3 года назад

I did this process when I ported and polished my throttle body on my Mustang. Came out like chrome...great video as always buddy!

@HonestDiecast 3 года назад

Thanks amigo! Bet she's purdy in there! 😁👊

@mikefagan6840 8 месяцев назад

I've done this using Turtle Wax polishing compound and a dremel tool with polishing bit. Came out absolutely beautiful. ❤👍👍🤘🤘

@YourfriendlyneighborhoodChevy Год назад

thank you for the description with the item links! Been wanting to get into diecast customs but was lost and overwhelmed by how I might mess up or even know what to do. You make this seem doable for someone like me. The step by step and in depth explanation with tips really just shows how much tou are going above and beyond for this and really seem to want to help! I know this is long winded, but again. Thank you, this hobby has gotten me through tough times by allowing m to collect my favorite cars, built my childhood with hotwheels of all kinds, and has recently allowed me to find a small group of friends that like diecasts too! I only have one suggestion that my dad taught me as a "family secret to touch ups" (he built things alot); maybe to fix some imperfections or straight up cuts, grooves, or divits, you can use a sort of wax/enamel or soft acrylic (the kind that you can make that molds alot like clay but easier to cut) to make a very fine layer by getting it soft enough to get a flat surface (razor blade at an angle like you are doing a reverse scrape) to allow it to fill the gap. Then, as I've seen people do for other things, spray silver over it as a post-primer coat. (Primer not always needed as for some things like irl aluminium car mirrors on older cars only need a thin clear coat and silver) i hope I don't sound rude trying to teach a pro, but I'm just really exited about the discovery of this channel and want to share some other tricks that might work too! Anyways, bye and thanks! (Again, sorry this is long)

@HonestDiecast Год назад

Absolutely no offense taken, I appreciate the additional input and suggestions! Im happy you found this useful and if you ever need help going forward, please don't hesitate to ask! 👊😁👍

@bigsmoothiediecast6934 3 года назад

Thank you very much for all the info and tips I'm going to try metalcast paint. And this gives me a good starting point.

@HonestDiecast 3 года назад

You're very welcome! Ill go over the paint process next!

@dianeforrester2490 3 года назад

Great how to video. I can't wait to see the finished product!

@HonestDiecast 3 года назад

Thank you Madre! You'll get the best look at it while its in your hands! 😁👊❤

@timzchannel1960 3 года назад

Awesome can’t wait for the paint video. Thank you for the tips and sorry for that newbie question got to excited commented before watching the video!

@HonestDiecast 3 года назад

No worries my friend! I hope the upcoming episode helps Tim! Its Duplicolor Metalcast on a.polished car but honestly the same principles can apply! 😁

@Gendo. Год назад

Thanks so much for this tutorial, i used it to get a feel for metal polishing on a gundam model!

@HonestDiecast Год назад

Nice Gendo! Super stoked it helped my friend, if you have any other questions about anything then please help and I'll be happy to help! 👊😁👍

@Letmeslideinyou 4 месяца назад

Very nice! I getting into polishing different casting also. Can't wait to do my first chrome polish.

@HonestDiecast 4 месяца назад

Give it a shot! I'll be uploading a vid with a shortcut to polishing you might be interested in. 👊😁👍

@RAPIDNISMO 3 года назад

Soon as summer huts I'm tearing into an old mustang of mine, resto Rod comes to my mind...

@nucollector5597 3 года назад

Noice sounds cool🤙🏽

@HonestDiecast 3 года назад

Nice Aaron! Cant wait to see! 😁👊

@RAPIDNISMO 3 года назад

@@HonestDiecast the rain that hasn't stopped for a week gotta stop lol

@bsdiecastfantasyland2320 3 года назад

Looking good! Nothing like seeing the finished product after the work put in! 👍👊😃

@HonestDiecast 3 года назад

Absolutely my friend! Sore fingers and all! 🤣😁👊

@bsdiecastfantasyland2320 3 года назад

@@HonestDiecast There may be a new group of customizers on the horizon... lookout Four Horseman and Three Blind Mice!! 🤔😂😂😂👍👊

@HonestDiecast 3 года назад

🤣😁👊

@StaticKrispy 3 года назад

Suhweeettt video buddy definitely something I want to try when I get into making customs 😁👍🏼👊🏼

@HonestDiecast 3 года назад

Thanks Static! Give it a go sometime, lots of work but lots of fun! 😁👊

@StaticKrispy 3 года назад

Yes definitely first I’m going to practice with wheel swaps then try to do paint jobs/ polishing ! 😁👍🏼👊🏼

@davidbeeson1178 3 года назад

Well done brother, if you can get ahold of some flitz Polish give it a try it works awesomely. I have been through quite a few different polishes and compounds and the flitz seems to be the best for me. Very cool and informational video brother.

@HonestDiecast 3 года назад

I will DEFINITELY check out Flitz, thanks David! Didn't care for Mothers Mag Alum polish?

@SubieDiecastCustoms Год назад

Well done man. Been looking at very clean polished and I just seem to be impatient. Definitely helps for sure. Sandpaper sandpaper sandpaper💪🏼

@HonestDiecast Год назад

Yup! Make sure you look into that jewelry polisher I talked about on DD #85! Thats gonna save our fingers! 👊😁👍

@SubieDiecastCustoms 6 месяцев назад

And just realized I have that 62 chevy on the front there.@@HonestDiecast

@ovidiuschley3346 3 года назад

Great video my friend and very usefull !👍👏👏👏🥇🏆

@HonestDiecast 3 года назад

Thank you Ovidiu! 😁👊

@simplekustomsbyeddiepapand1838 Год назад

Now the new buffing wheel u will be done in no time and u can charge less !! Lol!!!! Thanks for sharing

@HonestDiecast Год назад

Meh, I kinda stopped charging for customs since I don't have as much time. 👊😆👍

@Hectorsautobody 3 года назад

What's up amigo very nice video master #hunters 😎👊💪👌☝️

@HonestDiecast 3 года назад

Thanks Hector! 😁👊❤

@GrafsGarage3 3 года назад

Looks great man!

@HonestDiecast 3 года назад

Thanks Alex! Paint on the next episode! 😁👊

@sjc7773 3 года назад

Great video, the stuff I sent you are on pretty bad cards, so hopefully you got plans for them in the detail shop. Not all but some. Castings are fine just some of the cards have seen better day's. See you next time, thanks.

@HonestDiecast 3 года назад

Thanks Graham, cant wait and thanks a ton! Ill send tour stuff out shortly my friend! 😁👊

@Sqwidwood 3 года назад

this works so good

@HonestDiecast 3 года назад

Thanks Car Guy! Give it a try! 😁👊

@HotWheeler 3 года назад

That is so impressive. 😎

@HonestDiecast 3 года назад

Thank you my friend! Give it a try when you get a chance! 😁👊

@jskipper13 3 года назад

Nicely done!

@HonestDiecast 3 года назад

Thanks jskipper! 😁👊

@brandon6541 3 года назад

Great video very helpful😁😎

@HonestDiecast 3 года назад

Thank you, Brandon! Happy you enjoyed! Stay tuned for more, I hope they help as well! 😁👊

@brandon6541 3 года назад

@@HonestDiecast 😁

@trevoursamudacollections5796 3 года назад

thanks for the info.................................

@HonestDiecast 3 года назад

You got it, Trevour! 😁👊

@nucollector5597 3 года назад

Noice love that shine. Thanks for the great video 🤙🏽

@HonestDiecast 3 года назад

Thank Nu! Give it a go, its worth the trouble! 😁👊

@nucollector5597 3 года назад

@@HonestDiecast yes I definitely think so. Just got my new airbrush and compressor just waiting for the booth. Can’t wait to spray 🤙🏽

@HonestDiecast 3 года назад

Nice Nu! I have an airbrush as well but need a booth as well! 😁👍

@nucollector5597 3 года назад

@@HonestDiecast I order the Master brand on Amazon dual fan hopefully it works good🤞🏽

@HonestDiecast 3 года назад

Nice! I've heard good things about Master! Iwata as well (apparently the best). 😁👍

@TheHazard777onCODPS3 3 года назад

Going to have to give this a try

@HonestDiecast 3 года назад

Please do Hazard! Let us know how it works out! 😁👊

@TheHazard777onCODPS3 3 года назад

@@HonestDiecast Once time permits going to give it a go. Hopefully back to making videos once more.

@HonestDiecast 3 года назад

Yes please! Vids, vids, vids! 😁👊

@efrenlopez1733 3 года назад

Very Nice 👌

@HonestDiecast 3 года назад

😁👊👍

@cunderthunt 10 месяцев назад

Great Video! You think it’d be okay to sand to 2000 grit and then never dull the cars?? I’m assuming the degreaser will take all the left over residue off??

@HonestDiecast 10 месяцев назад

I'm pretty sure the polish would hold up for quite a while if you used a good polishing compound after the 2k grit. If you plan on painting after polish, then a really good clean is a must. I personally drop the car in a jar full of acetone and let it sit for some time. That seems to do the trick. 😁👍

@kairus1 5 месяцев назад

How can I clean the chrome diecast parts on my Voltron ?? They have some tough stains that wont come of with warm water and soft cloth.

@HonestDiecast 5 месяцев назад

Theres stains on the actual chrome body?

@mariomarredo 9 месяцев назад

tks a lot..

@HonestDiecast 9 месяцев назад

My pleasure SpecialPicks! Thanks for checking this out! 😉👊

@diecasttaterhw8002 3 года назад

Hi I've found two supers and a treasure ever since your video about what they are! Thanks for that. I was going to ask if you could help me build my collection? Like if you would make another video. I've been hunting since 2019 and I've only found three. It is fun getting them so thanks for all the vids I look up to you! Have a great day! Hope you see this.

@HonestDiecast 3 года назад

Hey Isaac! Dude that is friggin' awesome! Congrats on your finds! Which ones did you get? Ill be happy to make any vid your guys request, just lemme know some specifics my friend! 😁👊

@diecasttaterhw8002 3 года назад

Thanks! I found the sesto elemento and the 95 mazda rx7. The treasure hunt is the 2021 custom 77 Dodge van. But about the video, I was wondering if there was an easier way of finding treasure hunts, like a different strategy for looking? Or if they are easy to spot if you look at them a certain way you automatically know that you have found one. Thanks so much for you're help!

@HonestDiecast 3 года назад

Well if Im cracking a case, Ill look down into the case for the designated super car and see if its spectraflame or regular paint. Thats what Ill usually do. Other than that, the spectraflame always catches my eye and I make sure to check every car that is a super in the current or previous case. 😁👊

@diecasttaterhw8002 3 года назад

Ok! Thanks so much! Best of luck! Hope you find some good ones!

@HonestDiecast 3 года назад

Thanks Isaac! You too buddy! 😁👊

@LaurensSecretAdmirer 3 года назад

BADASS

@HonestDiecast 3 года назад

Thank Jimmy! I hope it helps bud! 😁👊👍

@eclectic_savant 2 года назад

Don't know if this video is too old to answer my question, but could I replace the buffer and polish compound with 5000 grit sandpaper? I have the supplies, but like to brag about hand sanding to a mirror finish.😉😁

@HonestDiecast 2 года назад

Not too old at all, Eclectic! You should always finish with polish compound to get the fine imperfections out and to bring out the shine. Buffer wheel works best but you can certainly apply and remove the compound by hand if desired! Hope this helps! 😁👍

@justinmcwilliams6759 2 года назад

You can also electroplate the casting with zinc to fill in imperfections, etc. before sanding and polishing. That's what I do.

@HonestDiecast 2 года назад

Yes Justin, great idea. I looked into zinc plating as shown by BareMetalHWs but I never went through with it. I need to try it! 😁👍

@justinmcwilliams6759 2 года назад

@@HonestDiecast I have a bench 12vdc power supply, and I get the muriatic acid at Lowes, a gallon jug is pretty cheap and will last for quite a while. I tried using zinc galvanized flashing as the sacrifice, but didn't have enough pure zinc...so I broke down and bought some on Amazon. I also have a copper bath, I made with the same acid and leftover copper wiring from various circuits I've added to the house. Plenty of sacrificial copper for copper plating!

@HonestDiecast 2 года назад

Sounds amazingly interesting! I want to try! 😁

@justinmcwilliams6759 2 года назад

@@HonestDiecast It's pretty fun, too! Just...just don't do like I did, get crunk and forget you have a car body in the acid plating bath....and leave it overnight.

@HonestDiecast 2 года назад

😆 did it pile up too heavy?

@tajhauser2415 3 года назад

Wow

@HonestDiecast 3 года назад

Thanks Taj! Give it a go! 😁👊

@V_ML_C 9 месяцев назад

Do I need a rotary tool to get that mirror like finish? I tried using just my elbow grease and can't seem to get the same effect? I'm wondering if I didn't sand it properly or it's really the rotary tool that would make the difference. Thanks in advance.

@HonestDiecast 9 месяцев назад

This write-up was all done sanding by hand minus the polishing compound (which can also be applied by hand). A dremel with a buffing wheel will certainly help when applying the compound though! 😁👍

@V_ML_C 9 месяцев назад

@@HonestDiecast I'll try sanding it some more then. Spent a good 20 minutes with the 400 and 600 grit. Maybe I rushed the last few grit sizes. Cheers!

@HonestDiecast 9 месяцев назад

Yeah give it a shot and take your time with the 400, thats the most important step. 😁👍

@V_ML_C 9 месяцев назад

@@HonestDiecast Thank you for the advice. Sanded the whole thing again starting with 400 all the way to 2000. Then compound. Got the mirror shine I was hoping for. Next step.... Painting. Are you on instagram? Would love to show you the result.

@HonestDiecast 9 месяцев назад

Awesome, happy that worked! Im not but you can send me pics at honestdiecast@gmail.com 😉👊

@imprrza3969 Год назад

Can 18v work for a rotary tool

@HonestDiecast Год назад

Yeah for sure, I use an 18V Milwaukee drill to drill the posts. 👊😁👍

@jskipper13 3 года назад

Hey how many uses do you get with the polishing pads? Can they be washed and re-used?

@HonestDiecast 3 года назад

That I'm unsure of! Ill use em till they are pitch black then change em out but thats just me! Im sure they could be washed if needed. Theres a link in the description for a kit with a bunch of em for cheap! 😁👊

@jskipper13 3 года назад

@@HonestDiecast ahh perfect, thanks man! They’re kinda expensive at Ace...

@HonestDiecast 3 года назад

Yes they are! Check that link in the description, I wanna say its $10-$20 for a big ol' set of em!

@jskipper13 3 года назад

@@HonestDiecast yup $9.99 for 88 of em! Score!

@HonestDiecast 3 года назад

Sick! Happy to help my man! 😁👊👍

@andhikameirzha2048 5 месяцев назад

Can i only use polishing compound without rubbing compound? Because its hard to find the brand tha you use

@HonestDiecast 5 месяцев назад

You sure can! Rubbing compound would just be an extra step but you should get a good result with just the sanding steps and polishing compound. 👊😉👍

@andhikameirzha2048 5 месяцев назад

@@HonestDiecast also is it different between wet sanding and dry sanding?

@HonestDiecast 5 месяцев назад

Yes, wet sanding is definitely preferred for finishing work like this. 👊😉👍

@andhikameirzha2048 5 месяцев назад

Thank you for answering my question, i will post the result in the near future through my social media🙏🙏🙏🙏

@andhikameirzha2048 5 месяцев назад

Btw i already try your method about wet sanding and dry sanding, its good but i think i need more sanding to get that finish. I also use the polish to have a chrome finish, but the result is a little bit darker, i already wash it with dish soapy water and still not as mirror look as yours. And the last thing i also try to heat up my spray can using hottest tap water for like 10 minutes, and i love the result although im trying to find the anodized spray can in indonesia which is rare especially uncommon colour. Thank you for your video and comment. ❤❤❤❤❤🙏🙏🙏🙏🙏

@nevarism 2 года назад

Where did you find the red container you using in the video

@HonestDiecast 2 года назад

I honestly dont remember where I acquired those from. Very handy though! 🤔👊

@nevarism 2 года назад

@@HonestDiecast you know what's it call or who makes it by any chance ?

@HonestDiecast 2 года назад

If I remember right, I got those out of plastic storage bins sold at Michaels. The red parts sit ontop. I have no clue as to what brand they are. 👊😩

@nevarism 2 года назад

@@HonestDiecast I found it at Michael's thank you

@HonestDiecast 2 года назад

Awesome! 👊😁👍

@offeze 3 года назад

second ! :)

@HonestDiecast 3 года назад

🤔🤣😁👊

@jonathan_alcala 3 года назад

How do you take the bottom of the hot wheels

@HonestDiecast 3 года назад

Jonathan, here you go! Hope this helps my friend! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-27FY-1niCZ8.html

@jonathan_alcala 3 года назад

Thank you

@HonestDiecast 3 года назад

You're very welcome my friend! 😁👊

@RAPIDNISMO 3 года назад

CUSTOM SERIES IS BACK!!!

@brandon6541 3 года назад

Yess

@HonestDiecast 3 года назад

Yup! Gotta get some more customs vids in! 😁👊

@RAPIDNISMO 3 года назад

@@HonestDiecast can't wait!

@TurboTyler405 3 года назад

GIVEAWAY!!!!

@Bitwhatup Год назад

will it mess up paint

@HonestDiecast Год назад

Not sure what you mean, this is a write-up on how to polish a bare metal car. 🤔👊

@Bitwhatup Год назад

@@HonestDiecast im saying that if you have spray paint on it and put rubbing compound on it will it ruin the paint

@HonestDiecast Год назад

You can use polishing compound to clear up clear coat as well

@Bitwhatup Год назад

@@HonestDiecast Thanks Sir

@mmpyanez5775 3 года назад

First

@HonestDiecast 3 года назад

🤣😁👊

@RAPIDNISMO 3 года назад

Third

@HonestDiecast 3 года назад

🤯🤣👊

@RAPIDNISMO 3 года назад

@@HonestDiecast mind blowing 🤯

@HonestDiecast 3 года назад

Thank you my friend! Easy process, just time consuming. 😁👊

@RAPIDNISMO 3 года назад

@@HonestDiecast i can imagine! Please do details next lol! The part I always struggle at 🤣

@HonestDiecast 3 года назад

Will do Aaron! 😁👊

@milekdiecast9481 3 года назад

Zamac contept

@HonestDiecast 3 года назад

Yeah, just polished. 😁👍

@nehaisszerintemnem3048 Год назад

Hmmmm, skip those sandpaper works. Rotary drill+ finest steel whool. Faster the process and cheaper th steel whool.

@HonestDiecast Год назад

Updated polishing how-to coming soon. 😉👍

@nehaisszerintemnem3048 Год назад

😂LoL, i love your precision and houmor! Keep up the good work and thank you so much for the tips in your videos. Helped me alot when i started the restaurations 💪✌️

@HonestDiecast Год назад

😆 Thanks Neha, super happy you found it helpful! Enjoy your restorations! 😁🙏

@WillieBeard 9 месяцев назад

I’m more interested in polishing a “painted” car.

@HonestDiecast 9 месяцев назад

This write-up is intended to help people who want to spectraflame paint a car to make it look like a Super or an RLC car. Or just have a fully polished car. Sad to hear this wasnt what you were looking for.