How to Port Match a Throttle Body | Extremely Satisfying

Подписаться 76 тыс.

Просмотров 32 тыс.

50% 1

How to Port Match a Throttle Body | Extremely Satisfying
Today I chose to port match my new intake manifold to the same diameter as my Skunk2 Throttle Body. Unfortunately my throttle is pretty old school and I couldn't figure out what size it was. I googled the serial number and nothing came up. I then measured with a tape measure and converted inches to millimetres. I found out that my throttle body is about 68mm. This should help increase the flow once my engine is assembled and making boost.
The process was honestly super simple. First I traced the gap of the gasket onto the face of the intake manifold plenum. Then I simply removed the material with an air powered die grinder that I bought at Harbor Freight. The last thing I had to do was smooth out the rough edges with the stone bit and the drill.
Super easy, very fun, and well worth it.
P. C. E. A.
Instagram ► @boosted_john
Merch ► www.boostbunker.com
Patreon ► / boostedjohn
#boostedjohn

Авто/Мото

Опубликовано:

18 июн 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@boosted_john 4 года назад

Have you ever done this, and did I do it right?

@StraightLineCycles 4 года назад

You didn't screw it up don't worry, It just takes a lot of time to make it look like a factory peace but what you did will definitely do the job no problemo

@mihailpetrovici5044 3 года назад

I think you need to dig more strainght to the back, the front part matches but the port gets smaller deeper down

@ryanscanlan9875 3 года назад

Great job. Using wd40 with the stone will stop it gunking up;

@aridawson3775 2 года назад

Sorry to be so offtopic but does anyone know a method to log back into an instagram account? I stupidly lost my password. I appreciate any tricks you can offer me!

@tomasleland5929 2 года назад

@Ari Dawson instablaster :)

@wowdogeful 4 года назад

I love that you still use these oldschool tuning techniques and modify your existing parts, nowadays most people will just buy matching off the shelf parts

@JustPasha 4 года назад

Dude it’s so satisfying. It’s like asmr but better. It’s like having someone massage you and you get to relax but there’s no massage... it made me feel so good, thank you!

@boosted_john 4 года назад

Hell yeah. I’m so glad you had that experience.

@dragan3290 2 года назад

It's the best feeling when you bolt it on and it feels so different!

@screwsnutsandbolts 4 года назад

Great job 👍

@myPursesuitOfHappiness 4 года назад

I think after watching this I might even be able to do this! 😁 Great instruction and great video quality. TFS. Xoxo 🤗

@camlobesvtec 3 года назад

I've done it before I gasket matched my turbo manifold and turbo. The cast iron cut like butter the stainless steel was allot more difficult. I'd say you could have shaved off a bit more but your right, close enough. It sounded like you were losing air pressure which will effect the way the die grinder cuts. Good job

@timothystrunk7323 4 года назад

This is really cool

@802Garage 4 года назад

Great quick video! I have definitely found the stones, especially cheaper ones, are quite slow. The carbide burrs are the way to go for removing material fast for sure.

@boosted_john 4 года назад

Yeah it made a huge difference.

@julifer9211 2 года назад

For the throttle body connector what color is it.. blue..? Thanks

@PelonDeArizona 3 года назад

Was checking out all the videos before subscribing. The Tecate sealed the deal since it’s my go to beer.

@boosted_john 3 года назад

Yeeeeeee. You run it with or without a lime?

@PelonDeArizona 3 года назад

Boosted John depends, if I’m out in the garage wrenching, no lime.... If I’m just chilling In the house, I do lime, salt, Clamato with some hot sauce lol

@boosted_john 3 года назад

Pelon Jones that sounds lit actually. Never done the whole shebang. I’ll be giving it a shot tho.

@PelonDeArizona 3 года назад

Boosted John unsubscribing now lol.

@jellabean 2 месяца назад

What all are you using to clean it with?

@JohnnyVallleVelasquezOfficial 2 года назад

Could you help me out with my f23a1 build?

@deltadetrix Год назад

this is a great budget upgrade but the rusty allen screws would drive me crazy i replace bolts all the time on my car just to keep everything looking and feeling fresh

@trulsvian 3 года назад

Nice adding a Ricky-ism at the end:P

@boosted_john 3 года назад

FINALLY! Someone got it!!!

@davidherman8244 2 года назад

Does it actually add anything in performance at all

@MrReivn 11 месяцев назад

On stock engine, propably not. But with ported head, better exhaust, camshafts, etc. mods it will have an effect. This example situation of factory quality in the video is quite bad in my opinion, usually they can match the intake and tb better than this. If the difference was the other way around, it would not matter that much (if the tb is large enough that is), but that lip going from larger tb to smaller manifold, creates a huge barrier for air. That alone can mean that the runners won't get enough air on higher rpms, which will reduce peak performance.

@StraightLineCycles 4 года назад

I did my own golf ball dimpling on my head on my KX125, whether it works or not is besides the point, it looks really cool

@boosted_john 4 года назад

Straight Line Cycles haha that’s rad

@StraightLineCycles 4 года назад

@@boosted_john Just remember you never ever ever want sharp edges in the combustion chamber because that can cause detonation the throttle body however should be fine