Тёмный

How to Program a Ford Key with Only One Key Using FORScan on a 2002 Thunderbird. 

Two Keys Studio
Подписаться 8 тыс.
Просмотров 42 тыс.
50% 1

This video shows how to program a Ford key with FORScan when you have only one key, what can go wrong, and how to recover from a worst case scenario
.Here is the OBD2 ELM327 adapter that I used:
amzn.to/3vaddKZ
Did this video help you or entertain you? If so, here is a link to leave a tip: paypal.me/twokeysstudio?count...

Хобби

Опубликовано:

 

7 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 60   
@stevejung2073
@stevejung2073 3 года назад
Followed these instructions for my 2006 expedition and it worked great, no errors. Thank you.
@TwoKeysStudio
@TwoKeysStudio 3 года назад
Glad that it helped.
@dextermazuka5022
@dextermazuka5022 3 года назад
Hello #Steve Jung With tour 2006 expedition did you had any working key?
@bunnywaffles5295
@bunnywaffles5295 2 года назад
I really appreciate you showing the failure and explaining how it was remedied. Between you and the polite commenters, anyone should be able to get their ford keys working off this video
@TwoKeysStudio
@TwoKeysStudio 2 года назад
Thank you for the positive feedback and for watching!
@vishalmukesh3571
@vishalmukesh3571 Год назад
@@TwoKeysStudio just the wondering thought, when u plugged in the obd, it must have given you the opportunity to save your existing programs of the car. when you failed. Have you tried running the saved program to see if it reverts the problem? before you called a locksmith.
@TwoKeysStudio
@TwoKeysStudio Год назад
@Vishal Mukesh I tried that. Basically it deletes first (unrecoverable) and then adds.
@apsuhead
@apsuhead Год назад
Just programmed an additional key for my 2014 escape and it worked perfectly. Bought a $16 ODB2 reader for $16 on amazon and turned off MyKey restrictions. Bought a $11 extra key on ebay and programmed the key fob. Paid $75 for locksmith to cut the new key, then used Forscan and this video to program the new key. Worked perfectly … thanks!
@TwoKeysStudio
@TwoKeysStudio 11 месяцев назад
You're welcome! Thank you for watching, and thank you for providing feedback about the process.
@0wgzy
@0wgzy 10 месяцев назад
$75 for a cut!?!?!?!?!?!??!?!?!
@donnybrook8051
@donnybrook8051 10 месяцев назад
Couldn't you have taken the key to a regular key cutter? It's like 5 bucks.
@apsuhead
@apsuhead 10 месяцев назад
@@donnybrook8051 I tried Lowes, Walmart, AutoZone etc and no one could cut the Ford key. Only a locksmith could cut it with a laser cutting machine. $75 seemed expensive though 🤑
@0wgzy
@0wgzy 10 месяцев назад
@@donnybrook8051 yep, local locksmith did mine for free was in and out in less than a minute
@artfisher1235
@artfisher1235 Год назад
I have programmed new keys for two vehicles with Forscan so far with no issues.
@To-Masz
@To-Masz 2 года назад
I have 2 cards for mazda cx 9 from 2008. I have a problem with keyless go. Once it works fine and in a moment I have to start the car with a metal key. The key flashes red while driving. Not when the immo is flashing and I can't start the car. I suspect that it is the keyless module or the fault of one of the antennas. Can I use a forscan to reprogram my cards? Is it safe?
@donnybrook8051
@donnybrook8051 10 месяцев назад
Thanks for the video. I tried to program my 2010 Ford Fusion Hybrid via the key on off 8 times, but it wouldn't work. I thought maybe my car already had four keys programmed. So worst comes to worst and if i erase my good key, I'll call a locksmith. The good news is using Fortran, I could see that it showed only 2 of 4 keys programmed. Long story short it worked and no locksmith was needed. Now i have 3 of 4 ignition keys programmed.
@TwoKeysStudio
@TwoKeysStudio 10 месяцев назад
Glad to hear that it worked. Thanks for watching!
@bobomomo3764
@bobomomo3764 9 месяцев назад
I guess the best place to do this method right infront of the locksmith shop. Just in case 😂
@TwoKeysStudio
@TwoKeysStudio 8 месяцев назад
For me it would have, but others have successfully done it with good keys.
@johnmarken3945
@johnmarken3945 2 года назад
curious why you posted a video purporting to show how to use forscan to program a second key when instead you had to call in a locksmith. LOL
@TwoKeysStudio
@TwoKeysStudio 2 года назад
Good question. If I would have had a good key it would have been successful. It pretty much shows the worst case scenario and that it is possible to recover from it.
@JackPepal357
@JackPepal357 2 года назад
I lost all the keys for one of my town cars, luckily I have multiple town cars and for some reason the ignitions are the same. So I can make a copy of the key and I’m hoping I can program additional keys with this method without needing the original
@hssmotorsltd
@hssmotorsltd 2 года назад
Any luck?
@brucewayne2773
@brucewayne2773 2 года назад
If you have only one working key and you want to add additional key. You do not need FORScan or any other scan tools. Follow my instructions and it will work for you, I did this recently to my 03 mustang which has the Ford transponder key. First insert your original key into ignition and turn to on position, wait till alarm light to turn off, usually 5 to 10 seconds. remove your original key and place it right next to the ignition column. Place it near the ignition is at. This tells the car that the transponder is in proximity of the ECU. Next insert your new key and turn to on and wait for alarm light to go off 5 to 10 seconds. Remove key. Your new key is now programmed as the second key. Now you have 2 keys that is programmed to your car. Now that you have 2 keys programmed, follow the simple instructions to add additional keys. You are welcome.
@TwoKeysStudio
@TwoKeysStudio 2 года назад
Interesting, I'll have to give that a try..
@brucewayne2773
@brucewayne2773 2 года назад
@@TwoKeysStudio definitely give it a try, I guarantee you that it will work for you.
@rockenrooster
@rockenrooster 2 года назад
Where did you find this info? I can't find it anywhere. I have a 2008 Ford Fusion and just got a spare today, just need to get it cut and I'll try this....
@brucewayne2773
@brucewayne2773 2 года назад
@@rockenrooster I tried it on my own 03 Mustang. I am the only person that came up with this idea and it worked for me. Just follow my instructions . Let me know. Make sure you place/touch your original key right by the steering column close to the ignition when you are putting in your new key.
@rockenrooster
@rockenrooster 2 года назад
@@brucewayne2773 it didn't work on my 2008 fusion. Good thing I had an old Bluetooth OBD2 thing already. I had to use forscan and was able to just add a key, instead of erasing all of them and starting over. Now I have 2 working keys!
@garysincliar
@garysincliar 2 года назад
Will I need to connect the pc into car obd port.
@TwoKeysStudio
@TwoKeysStudio 2 года назад
Yes. Here is a link on how to setup and use FORScan. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9L9GlF7O-MA.html
@lorton4life
@lorton4life 2 года назад
What hardware/ cable are you using from Laptop to Obd2
@TwoKeysStudio
@TwoKeysStudio 2 года назад
Thank you for asking, I forgot to put that in the description. Here is the OBD2 ELM327 adapter that I used: amzn.to/3vaddKZ
@Majestiicc12
@Majestiicc12 11 дней назад
Ford Edge 2013, only 1 key, and it is nearly dead. I’ve read a lot about this but, the problem is that I’ve been getting conflicting information. Yes I can with a spare key and the ONLY key that we have… and then NO you CAN’T add new key with only 1 key. So… as all of you know this isn’t something I can be wrong about I try. So, that being said, can these specific details, still be ok and get a second key on our own?
@Jpilgrim30
@Jpilgrim30 Год назад
I had a feeling that this was going to happen when I saw you put the new key in the ignition. It looks like the key you were trying to program was a generation newer than you original key. It’s obvious now but that will not work lol. I keep some spare blank keys like these for any situation I need to program PATS and the customer only has one key. I’ll take the transponder ring loose from the column so I can stick a blank inside of it to trick the system into learning the second key.
@goromadness9755
@goromadness9755 Год назад
hi, I don't get it. If you stick a blank key inside of the transponder ring, how is that gonna do anything when you put a second key in the ignition?, I mean the blank key is just a piece of metal. I dont understand.
@ironboundauctionsseminole
@ironboundauctionsseminole 2 года назад
i just did the same thing and it the original stopped working, so i got 2 new keys and used the option to delete and program all keys and programmed them both and it worked again. so no need to call the locksmith, just buy another working key.
@TwoKeysStudio
@TwoKeysStudio 2 года назад
It was late Sunday when I did it and my wife wouldn't have been happy with her beloved Thunderbird spending the night outside so I went the locksmith route. I am glad to hear that you were able to get it done this way though. Thanks for watching and for the feedback!
@wyattburp2099
@wyattburp2099 2 года назад
I am trying this on my 2011 f150, i keep getting an error security access denied after programming has started, anyone know why?
@jdaniels1313
@jdaniels1313 Год назад
Perhaps, see my comments on which key blanks actually work with ForScan. However, mine was 2003, so not sure this holds true thru 2011, but it probably does. The only blank that worked with ForScan on my 2003 F-150 was this Strattech one: "StratTec 597602 H72PT Blank Transponder Ignition Key with Ford Logo for selected Ford, Lincoln & Mercury Vehicles" is the description on Amazon. HOWEVER, Your 2011 uses a different generation of PATS, and I had success using THIS key blank on Amazon with ForScan, on a 2006 Ford Focus, and others reported success with a 2007 F-150. Amazon description: "Car Key Fob Keyless Entry Remote fits Ford, Lincoln, Mercury, Mazda with Ignition Key (CWTWB1U331 GQ43VT11T CWTWB1U345 3-btn), Set of 2" I believe the 2007 F-150 PATS is the same as the 2011, so perhaps try it with these blanks.
@evanleonardomirandacruz6031
@evanleonardomirandacruz6031 5 месяцев назад
But I don't get it, if I have only ONE key, will it work or do I need two keys anyways?
@TwoKeysStudio
@TwoKeysStudio 5 месяцев назад
Yes, it will work. Mine didn't because I had a bad key.
@TheKingOfHalo
@TheKingOfHalo 2 года назад
I have forscan and a spare key I ordered off Amazon. I hope the transponder works. But either way I’d still have to pay $100 for someone else to program it. It’s worth a shot. I wonder if the car will exit programming mode if you disconnect the battery.
@RK-kn1ud
@RK-kn1ud 2 года назад
How'd you make out? Can you link to the key you purchased?
@ih8u228
@ih8u228 3 года назад
Bro u scared me when I seen it happened
@greggriep2883
@greggriep2883 2 года назад
Google how to test blank pats keys with forscan. Then you will know if it will work.
@wegiel1987
@wegiel1987 Год назад
I cant understand why your keyes were ereased when you used first option to only add a key without ereasing theese which have been already added.
@TwoKeysStudio
@TwoKeysStudio Год назад
Basically what happened was that the process hung up and stuck in programming mode because it couldn't complete the task since the key I purchased was bad. There was no way to back out of it. The locksmith completed the task with a good key.
@TheTonyburris
@TheTonyburris 2 года назад
$70 to have your key programmed in Lexington NC
@nicklaslindgard
@nicklaslindgard 2 года назад
What if you disconnected the battery for a minute or 2?
@TwoKeysStudio
@TwoKeysStudio 2 года назад
It would not matter, that info is stored in non volatile memory.
@nicklaslindgard
@nicklaslindgard 2 года назад
@@TwoKeysStudio ah. damn. thanks =)
@mongo462
@mongo462 3 года назад
You have to have 2 keys programmed to program any others. Erasing all would’ve saved you
@TwoKeysStudio
@TwoKeysStudio 3 года назад
As I mentioned at 3:13 what you said wasn't the issue. My new key had a bad transponder so it was stuck in program mode waiting for a second key. When the locksmith came out he cut the new key with a good transponder and it completed the programming sequence.
@XeoWolf
@XeoWolf 3 года назад
No... the whole point of using forscan is programming a SECOND key. As he said in the video, his 2nd key had the wrong or a bad transponder.
@michaelcrumly
@michaelcrumly 2 года назад
so what your saying is you did this whole video to tell us it didnt work, and you didnt retry it to prove it did work...ah yah thanks
@TwoKeysStudio
@TwoKeysStudio 2 года назад
No, I made the video to show that it would have worked, but I had a bad key and showed that it is recoverable. Others have followed the procedure and it worked fine with a good key. Take a look at the comments.
Далее
Я НЕ ОЖИДАЛ ЭТОГО!!! #Shorts #Глент
00:19
Can you program a spare key with one working Ford key?
3:15
Ford MyKey and Key programming using forscan
16:36
Просмотров 62 тыс.
How To - FORscan Key Reprogramming
7:27
Просмотров 17 тыс.
How to Program a Ford key and key fob with ease
2:48
А вы бы как с ним поступили?
0:22
🤣🤣🤣 наш инст 👉 ksenikzzz
0:20
Просмотров 1,5 млн