I show how to program Toyota remote fob yourself. Works for many models of Toyota (See list below). Remote programming for Toyota Corolla or any of these applicable model years is very easy and you do not need the dealership for this. Just follow these steps to program a Toyota remote without a scanner.
Applicable model/years (not exhaustive)
- Corolla 2003 - 2008
- Matrix 2003 - 2008
- Camry 2002 - 2006
- Highlander 2001 - 2007
- 4Runner 2003 - 2009
- Rav4 2003 - 2011
- Sienna 2004 - 2010
- Solara 2004 - 2008
Get from Amazon:
- Aftermarket key fob I used - amzn.to/3ZEYNjs (This fob will work if the FCC ID on the back of your current remote is GQ43VT14T)
- Check out other tools I recommend - amzn.to/42LGCL8
I may earn a small commission from a purchase made through the link above. This does not increase the price you pay in any way.
Programming procedure:
1. With driver door unlocked & open; other doors closed, insert key into ignition and remove twice within 5 seconds.
2. Within 40 seconds, close and open driver door twice, then insert key into ignition and remove the key.
3. Again, within 40 seconds, do these in sequence: close and open driver door twice, insert key into ignition and leave it, close the drivers door, turn the key to the ON position without starting the car (dashboard lights up), turn off the ignition and remove the key
4. The doors should lock and unlock within 3 seconds signalling programming mode is active.
5. Within 40 seconds, press and hold the lock and unlock buttons of the remote you want to add for about 1.5 seconds. Let go of the buttons and immediately press and hold the lock button for 2 seconds. The locks should cycle once within 3 seconds, showing that the programming was successful.
NB: If the locks cycle twice, the key was not accepted. Repeat step 5. To add additional remotes repeat step 5 on the additional remote. Be sure to stay within the 40secs window.
6 Exit programming mode by opening and closing the driver door.
Timestamps
0:00 - Intro
0:25 - Testing new remote fob
0:40 - Remote programming procedure
1:51 - If programming fails
2:11 - Adding more remotes
2:21 - Testing programmed fob
#toyota #keyfob #programming #diymechanic #diycarrepair #diyautoworksng
25 июл 2024
