No video :(

HOW TO PROPERLY VHT TINT YOUR TAIL LIGHTS

Подписаться 19 тыс.

Просмотров 25 тыс.

50% 1

**Some links are affiliate links that I earn a small commission on**
- Link for VHT Tint spray: amzn.to/3iTmJgB
Link for clear coat: amzn.to/3DsKGDa
ALL MODS ON THE COROLLA:
Wheels: amzn.to/3WKgcGd
Tires: amzn.to/3H1eaLH
Borla exhaust: amzn.to/3OJDeg2
Brakes: amzn.to/3kC07VC
Coilovers: amzn.to/3iX91wl
Rain visors: amzn.to/3wmMJak
Hyper dip: amzn.to/3D66kzk
Rear spoiler: amzn.to/3HolsdV
Brake light vinyl: ebay.us/sbgRrd
Headlights: amzn.to/3GSDUd6
Fog lights: ebay.us/Bl2gms
Tail lights: ebay.us/f2O3rD
Bumper lights: amzn.to/3XNuLcL
Body kit: ebay.us/Qh9cbV
Tow strap: amzn.to/3WoJidW
Hella horns: amzn.to/3GSEEyU
Hella horn harness: amzn.to/3D6wBgO
Hood struts: amzn.to/3iUI38F
Cheap radio: amzn.to/3wmoE3r
Idoing radio: ebay.us/FTFI02
Flasher relay: amzn.to/3XQwCxo
Backup camera: amzn.to/3XQ1nCJ
Front camera: ebay.us/nqQnNu
Keyless entry: amzn.to/3H0DRMx
Dash cam: amzn.to/3wnRUXK
Sub/ amp: amzn.to/3J5Tjtq
Vinyl floor: amzn.to/3J4bxLZ
Pedals: amzn.to/3QVGFz7
Carbon fiber vinyl: ebay.us/LQ8WxN
Dual USB: amzn.to/3D5LPmt
Steering wheel cover: www.eastdetail...
Arm rest: ebay.us/FX6hUE
Short shifter/ bushings: www.monkeywren...
Cold air intake: ebay.us/9ZKDiz
Tune: amttuning.com
Catch can: amzn.to/3XvMHci
Catch can hoses: amzn.to/3XtegCN
Turbo kit: www.turbokits....
------------------
DISCOUNT CODE: BRANDON75
Seat covers: www.clazzio.com
DISCOUNT CODE: COROLLA5
Performance solenoids: www.redbullet.net
DEALERSHIP LEVEL MANUALS WITH eMANUAL:
shrsl.com/3zta2
STAY HYDRATED WITH LIQUID IV: glnk.io/8ln02/...
20% DISCOUNT CODE “BRANDON_STELLMACH”
BEST FLOOR MATS 3DMATS: bit.ly/3yWWQVs
10$ DISCOUNT CODE: BRANDON3D10
LED LIGHTING LASFIT: lddy.no/1fplh
15% DISCOUNT CODE: BRANDON15
------------------
*Some of the links are affiliate links that I make a small commission off of.
» » » » » » » » » » » » » » » » » » » » » » » »
Business Inquiries, contact:
brandonstellmachbusiness@gmail.com
» » » » » » » » » » » » » » » » » » » » » » » »
*UPDATED LINKS*
Camera Gear I use:
DJI ACTION 4K: amzn.to/45BVu0M
TRI-POD: amzn.to/3MZASYP
SUCTION MOUNT: amzn.to/3OJkD3C
INSTAGRAM: / justa_yota
Track: Cartoon - Don't Be A Stranger (Ft. Jason Diaz) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Cartoon, Jéja - Don't ...
Free Download / Stream: ncs.io/DontBeAS...

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 99

@__MAT__ 2 месяца назад

Best vht tint outcome I have seen. Nice work.

@BrandonStellmach Месяц назад

Thank you!

@wheeler488 Год назад

I had a can of VHT ready to do my truck taillights. Never even dawned on me to wet sand or clear coat. 8:00 I had 2000grit at home. They turned out fantastic. Thank u for this video!

@BrandonStellmach Год назад

That’s awesome! I’m glad the video gave you the idea for sanding and clear coating!

@fadededgeofficial3714 Год назад

I was gonna be lazy glad I found this

@oLiKeAaREEZYo 21 день назад

Yeah never occurred to me either. I did this on my chevy only cleaned them with alcohol did 4 coats to get a dark smoke look and 2 layers of clear coat looked absolutely amazing. Honestly as long as you know how to use spray paint it'll be fine without sanding

@vikitoto2000 3 года назад

All your mods are on point man. I have the same corolla and every video your release is like a teaser for me

@BrandonStellmach 3 года назад

Glad to know you like the videos. Thanks 🙏

@yelsinchacon124 Год назад

I feel you bro, I got the s model so I’m a couple of features ahead of his car but every mod he comes out with I feel like I need to do to mine too 😅

@tomsawyer227 2 года назад

best application and outcome i've seen!

@BrandonStellmach 2 года назад

Thank you!! Really appreciate it!

@nikesales12 Год назад

So you did the vht, wet sanded with 2000, two coats of clear coat, one more wet sand and then hand polished?

@BrandonStellmach Год назад

Yes that is correct! You could probably omit the first wet sand if you are in a time crunch.

@rbuck3424 8 месяцев назад

Thanks for the video very helpful

@BrandonStellmach 8 месяцев назад

Thank you! I hope the video helped!

@francesca1870 3 года назад

Love the end product 👏🏻

@BrandonStellmach 3 года назад

Thanks 👍

@michaellipschutz9306 Год назад

how do you polish and buff after wet sand

@BrandonStellmach Год назад

I just take some Meguiars polish for plastic, and a microfiber pad, and I just polish it by hand, because I don’t have a polisher!

@nikhil2186 7 месяцев назад

Hello is it fine to do with just one coat if you do not want it too dark? Also what clear coat do you reccomend

@zemoboy2316 3 года назад

love the vids man keep it up

@BrandonStellmach 3 года назад

Thank you 🙏

@nikhil2186 7 месяцев назад

Hello, would it be fine to do with just one coat of the VHT if you do not want it too dark? Also what clear coat do you reccomend

@lotus.4811 3 года назад

Does this count as tinting in terms of legality in Cali? or would tinting refer specifically to something vinyl/polyester wrapped?

@BrandonStellmach 3 года назад

I’m not sure if this would be considered a tint or not, I believe just is just a clear spray paint with a darker pigment. But you can also control how dark or light your lights will come out with with how many coats you put on.

@eli9404 10 месяцев назад

How long did you wait for the VHT to dry before wet sanding? Thanks!

@BrandonStellmach 10 месяцев назад

I believe I let the VHT dry for about an hour before wet sanding it, and the clear coat I let sit over night before wet sanding and polishing.

@user-jv7mf2ce8n Год назад

If I finish following the steps, and I decide I want the tail lights to be darker after i polish them, can I just west sand them and go over it with another layer of VHT and clear coat? Or do I need to remove all of it?

@BrandonStellmach Год назад

If you polish it up, and decide you want it darker. I would atleast give them a quick sand with scotch brite to rough up the surface a little so the paint sticks better. But you should be able to tell when your applying the VHT, if it’s dark enough or not, and then just add an additional coat before the clear coat.

@corybeeston8317 8 месяцев назад

Thank you!

@BrandonStellmach Месяц назад

No problem! I hope the video helped!

@jay_2168 Год назад

How long was the wait time in between coats for the vht and clear coat?

@BrandonStellmach Год назад

I probably waited about 30 minutes between the VHT and the clear coat.

@SAZKanalas 3 месяца назад

A question, does it reduce the light source

@BrandonStellmach 3 месяца назад

Depending on how many layers you put, if you only do a couple, it won’t effect it much, but if you put multiple layers it can start to block the light!

@MissionKid 5 месяцев назад

I don’t know if it’s the headlight tint or the laquer spray but after I let the tint spray dry and apply laquer it removes the tint lol wtf I’m gonna have to remove it all again tomorrow and redo without the laquer

@BrandonStellmach 5 месяцев назад

I know humidity can cause problems with the clear coat. Never heard it remove it.

@bosanovaboy 10 месяцев назад

Hello and thank you for the video. Its been about 2 years since you made the video, do you still have the car and are you seeing any discoloration?

@BrandonStellmach 10 месяцев назад

I had them off my car for about 6 months, but ended up putting these back onto my new corolla, and they still look brand new!

@VibeVistaX Год назад

great info, btw please lower the BG music volume next time please!

@BrandonStellmach Год назад

Thank you! Will keep that in mine for my new videos!

@amhunter4518 Год назад

How long will it last with clear coat like you did it?

@BrandonStellmach Год назад

Should last a pretty long time! I had mine for about 2 years and they drilled looked like new! Only reason I don’t have it anymore is because I upgraded my tail lights!

@amhunter4518 Год назад

Thanks bro, did you end up sanding the clear coat?

@mikeycraft3392 4 месяца назад

Does it matter what type of clear coat used?

@BrandonStellmach 4 месяца назад

Preferably an automotive clear coat. Either 2K clear, or some type of clear gloss for the cars paint or wheels. Because this clear coat has other protections usually including UV, so it won’t turn yellow.

@ezzbruh4259 2 года назад

Could I do this if I cover all around the light without having to take it completely off?

@BrandonStellmach 2 года назад

Yeah people do that, you just have to be more careful when you do that, because this doesn’t come off your paint. So just got to tape off and mask off really good!

@trongaming457 Год назад

Can you remove it back to normal if you clear coat them?

@BrandonStellmach Год назад

It would not be easy to remove, you would need to sand and re clear coat it.

@bulldog2035 Год назад

What kind of cutting compound?

@BrandonStellmach Год назад

I was just using meguiars ultimate compound.

@chasethebordens 3 года назад

🔥🔥🔥

@BrandonStellmach 3 года назад

👍 👍

@jamescarlo21 7 месяцев назад

What did you use to polish?

@BrandonStellmach 7 месяцев назад

I just used a meguiars ultimate compound to polish them.

@THATLTRFOUR50 Год назад

So after you apply your vht let’s say two coats each within 10-15 min from each coat what is wait time to sand ? And finally when to sand after applying 2-3 clear coats? Asking and will do testing want to offer this my business and will ofcourse do ima practice twilights but would like to know your ultimate thoughts would like ti get it done within that same dat turnaround ?

@BrandonStellmach Год назад

I would say I would wait about an hour, for the VHT coats to wet sand. But To be honest, you might not need to do it depending how well the VHT went down. I sanded it because it seemed pretty rough and had some imperfections. And for the clear coat I would at least a minimum of 6-12 hours. Depending on how cold and humid the weather is. But if you can wait even longer that would be better. Same day turn around might be pushing it, unless you really start early, and can finish kind of late.

@THATLTRFOUR50 Год назад

Understood and what I figured maybe would have to offer to come back and finish them up after the clear coat or them just leave lights with me thanks man 🙏🏼 Do you think people Still Would want this kind of service now a days over actual tint!?

@BrandonStellmach Год назад

@@THATLTRFOUR50 yeah either if you can keep the lights for over a day would probably better. I still like to tint my taillights, also this way works much better on very complex shaped tail lights. Where your typical tint won’t stretch on certain angles. I would say many people like the tinted look, they just don’t won’t to pay for the expensive price for after market tail lights. So if you could offer at a decent price. Where it’s still much cheaper then nice after market lights, but still offers a nice tint for less then half of a new set of tail lights.

@MrHeroe27 Год назад

Greetings, I have the same car but I can't use a led in 9005 because they fliclkering a lot, what led 9005 do you use?

@BrandonStellmach Год назад

I’m just running a cheap set as well. And they do the same thing. There is no fix for this issue. Other then some people make decoders for these lights and all it does it make them run at full brightness all the time!

@MrHeroe27 Год назад

@@BrandonStellmach The same, I don’t want to use it at full all the time :(