Was getting A10 code and found a small sock in hose. Should’ve made video. Next time Whirlpool Model #WFC7500VW2 #A10 #whirlpool #maintenance #diagnosticsmode
I have the same washer. I had drain issues (not draining at all-this is why every home should have a wet/dry shop vac) and finally replaced the drain pump ($100 shipped from ebay, marketed as New). Now it drains, but it won’t enter final spin. During a wash cycle, the drum moves around normally left and right, agitating the clothes, but the countdown timer lingers on the 7-minute countdown for at least 10 minutes before it drops to 6, 5, 4… then just ends without going to 3, 2, 1, and without ever entering high speed final spin, thus leaving my clothes soaked. It takes hours to dry them this way. I ran the quick diagnostic mode (pressing Start 4 times fast) and it passes, including the high speed spin at the end. It sounds like a smooth booster engine, which I think is good. But then I enter the other diagnostic mode (press Cancel twice and Start twice) and it immediately gives me F25 without even moving the drum. I’ve checked the filter and every pipe for clogs, and found nothing. Supposedly there’s an inner-and-outer drum where clothes can get stuck, but I didn’t check there, and I don’t know how to. I’m also wondering if it’s worth it, since the high speed spin does work in the quick diagnostic test. Any ideas what else I can try?
Order both door lock switches, the door lock mechanism and the little white pressure switch. It will fix the problem it won't enter full spin bceuae it's detecting a faulty lock or switch.
my whirlpool washer has code F-06. the repairers don't want to come and fix it, it's a 23' located in a restricted area in a motorhome. I listened to your video. She tries to do her cycle but when she is at prewash her falls on the code F-06
F-25 code is the user interface fault code. During universal test mode you have to push all push buttons on the interface panel, all leds should light up. "All display led are turned on. UI option led will be turned on after options are pushed."
The door lock contains a wax motor. It will take a few minutes to cool down and release the locker. Many times the pct or wax malfunctioning and won't even release locker
