#Tutorial 

Hi Everyone! Here is the link to the course. www.dcelitetech.com/courses/washer-dryer-flipping-course/.

Finally someone who actually explains it from the start to finish, to many skip parts and you don't get the start to finish details. Thanks for the vid

Much appreciated 🙏 thanks for smarter and not harder instructions, I realized instantly when you said tilted sideways and reach up underneath, you are a smart individual sir! Take the whole freaking top off is what every other video has said!!! Thanks man! Although might have been a little bit easier if you would have just gave me a nice clear shot of all them error codes 😀 😉

Great video Took me all day to find a video that explained how these codes work. You hit the nail on the head. Thanks

That's what I've been looking for 6 months. THANK YOU DC!

Great explanations !*

Thank you very much.I appreciate your time.

This is great - the best tip is where to find that service guide. Thank you!

Thank you so much you solved my problem

Ok, but helpful would be linking the repair manual for those of us that need it...

Good job!!

Thank you amigo

Thank you guys for all your support! If this is your first time visiting my channel, be sure to check out the rest of my videos. Also be sure to hit the subscribe button! Thank you and have a great day!

Thank you sooooooo much !

How do I check a temperature thermistor on a magtag top load washer

Question: If you have an error code and then erase it without doing the repair, and then run the machine again, WILL THE ERROR COME BACK? I would think it WOULD but it hasn't. I ask because this is what I did exactly and the error NEVER came back. I didn't do the repair yet. Just a curiosity question.

OH and is it like car car, Do you have to clear the codes? or rerun itr teat after new parts are installed?

Hey brother; got a Whirlpool model wtw4815e1 that stops mid wash and holds water. Checked codes and had F1E2 - (motor control fault) Indicates a fault of the motor control section of the main control and F7E6 - (motor fault) Indicates an open clockwise or counterclockwise circuit of the motor. Cleared codes and ran auto diagnostics and it passed twice. Tried washing clothes but stopped again and threw F1E2 Motor control fault but not the F7E6 Motor fault. Cleared washer and codes and ran self test again and passed with no codes again. Why does it pass empty self tests but fail with clothes and what should i check?? Any help is greatly appreciated brother!

I have a older model but it still worked exactly the same I was getting a weird error code of f8 e1 or LF but I don’t know how to fix the problem. I’ve already checked and cold and hot water valves are on and the hose is connected correctly

Good stuff man. Thanks

Thank DC

Is there a way to get the techsheet online? The machine is too heavy for me to go under and take it. The model is a WTW4815EW1

What does it mean when the fill sensing, wash, spin and done lights are all flashing at the same time?

Thx only video I found on the exact washer I am trying to fix for my senior neighbor's is there a recalibration video? It 's not draining. I used a nother video and got it to go into diagnostic mode and recalibration and replaced the actiator and it's went through the cycles and then the rinse light stood on and it was making a light humming and slight noise but still not working ahhh help me mr. Wizard.

help!!! i ran diagnostics, but not sure what the lights are telling me. here is the blinking light pattern: sensing, rinse, done, spin. first 3 blink at same time, then spin alone, then repeat. what does this mean?

I think the manual is also available online.

During self diagnostic checknit eill run through every cycle individually and how will it tell you who h one ia wrong with them? Thanks

Where can I find a booklet with the codes I lost mine tht came w/ my washer

Here's a concise summary with timestamp links: Entering Diagnostic Mode: Start with the knob at a 12 o'clock angle, then sequence left-right-right-right-left-right to enter diagnostic mode (0:24). Accessing the Tech Sheet: The tech sheet, essential for reading codes, is located at the front of the machine's interior. Instead of removing the top, the presenter suggests leaning the machine back to access the tech sheet (0:37). Reading Codes: To begin reading codes, set the light on "Done" and press the start button. Then, turn the dial to see which lights flash up, indicating specific errors. The tech sheet provides a guide to interpret these flashes, with the first flash representing "F" and the second "E", followed by corresponding numbers that you add together to get the error code (e.g., F6 E6) (1:10). Example Error Codes: The presenter gives examples of how to interpret the flashes. For instance, if "Rinse" and "Spin" light up, you add their designated numbers to get F6; if the next flash includes "4" and "2", it results in E6, making the complete error code F6 E6, which you can then look up on the tech sheet for troubleshooting (1:16). Diagnostic Tests: After clearing or reading the codes, you can put the washer into a diagnostic test mode by setting the knob to "Spin". This runs the machine through all cycles, allowing for manual or automatic testing of different functions (2:37).

where do you get that book at?

How do I clear a lid lock code? Everything I tried every minus replacing the 80 dollar connector

I am confused about the e part of the lights

I have a brand new machine it does great until it gets to spin and done but won’t do it I manually have to make it spin

Damn bro I didn’t know I was going to have to do math

I just replaced the lid lock and the lock light is still flashing???? Help

Why did they have to make these damn things "smart" I just bought one of these pieces of shit and I already miss my 15 yr. old washer!

I don't get the code reading part?

I. Have a washer just like the one in video , obtained it in auction, it will wash and drain but when it begins to rinse the water will run for a second or two then shut down . The rinse light blinks and the door is locked . By researching videos on RU-vid it seems to be a common problem with these machines, even new ones. No videos on a fix for this problem. Have you ever repaired one giving the same trouble ?

Doesn't work on mine.

Where do you find the diagnostic sheet?

When you read the lights for F than E part of the light getting confused

Having trouble my washer doesn't wash properly and it makes noise

Please help

Plastic JUNK from Whirlpool! The Speed Queen "classic" washer model: TC5 is the ONLY washer on the market worth purchasing! It's a 30 year + washer!!

If the companies provide the repair manual in the machines for free, why not provide them online so we don't have to tip the machine over or remove the top.

Huh?

WTF is this guy for real?

THE BODHI12345